Unity 2D Movement 物体移动案例

导入工程

可通过Unity Asset Store导入或者自行下载导入Sunny Land

绘制地图

1. 制作Tile Palette

   通过Window > 2D > Tile Palette调整面板
   新建Palette
   

2. 导入素材：将Sunnyland/artwork/Environment/titleset-sliced拖入Tile Palette面板
   

   最后导入效果如图，如其他画板功能类似，左键单击（长按）选取，然后绘制。

   注：如果导入素材后绘制像素过小，请检查素材Pixels Per Unit值的大小（本工程为16）

   

3. 开始绘制

   在场景中添加TileMap（右键2D Object > Tilemap），即可利用Tile palette中的功能在场景中进行绘制。

   注：如果有多个Tilemap，可以通过在Tile palette中激活需要操作的TileMap。

   在绘制完后我们可通过组件Tilemap Collider 2D快速地添加碰撞盒

   

   前景：草、植物等

   ground层：地面等

   背景：墙、柱子等(通过改变Transform.Position.Z的值来改变前后关系)

   

   ground层

人物制作

首先简单地导入Sunnyland\artwork\Sprites\player\idle\player-idle-1.png到场景中

为Player添加刚体及碰撞盒

Character Controller

包含Object受力、速度、状态判断的变量

函数：

1. Move(float move, bool crouch, bool jump)

   move：横向移动量

2. Flip() —— 人物转向

using UnityEngine;

public class CharacterController2D : MonoBehaviour {
	[SerializeField] private float m_JumpForce = 400f;                          // Amount of force added when the player jumps.
	[Range(0, 1)] [SerializeField] private float m_CrouchSpeed = .36f;          // Amount of maxSpeed applied to crouching movement. 1 = 100%
	[Range(0, .3f)] [SerializeField] private float m_MovementSmoothing = .05f;  // How much to smooth out the movement
	[SerializeField] private bool m_AirControl = false;                         // Whether or not a player can steer while jumping;
	[SerializeField] private LayerMask m_WhatIsGround;                          // A mask determining what is ground to the character
	[SerializeField] private Transform m_GroundCheck;                           // A position marking where to check if the player is grounded.
	[SerializeField] private Transform m_CeilingCheck;                          // A position marking where to check for ceilings
	[SerializeField] private Collider2D m_CrouchDisableCollider;                // A collider that will be disabled when crouching

	const float k_GroundedRadius = .2f; // Radius of the overlap circle to determine if grounded
	private bool m_Grounded;            // Whether or not the player is grounded.
	const float k_CeilingRadius = .2f; // Radius of the overlap circle to determine if the player can stand up
	private Rigidbody2D m_Rigidbody2D;
	private bool m_FacingRight = true;  // For determining which way the player is currently facing.
	private Vector3 velocity = Vector3.zero;

	private void Awake() {
		m_Rigidbody2D = GetComponent<Rigidbody2D>();
	}


	private void FixedUpdate() {
		m_Grounded = false;

		// The player is grounded if a circlecast to the groundcheck position hits anything designated as ground
		// This can be done using layers instead but Sample Assets will not overwrite your project settings.
		Collider2D[] colliders = Physics2D.OverlapCircleAll(m_GroundCheck.position, k_GroundedRadius, m_WhatIsGround);
		for (int i = 0; i < colliders.Length; i++) {
			if (colliders[i].gameObject != gameObject)
				m_Grounded = true;
		}
	}

	public void Move(float move, bool crouch, bool jump) {
		// If crouching, check to see if the character can stand up
		if (!crouch) {
			// If the character has a ceiling preventing them from standing up, keep them crouching
			if (Physics2D.OverlapCircle(m_CeilingCheck.position, k_CeilingRadius, m_WhatIsGround)) {
				crouch = true;
			}
		}

		//only control the player if grounded or airControl is turned on
		if (m_Grounded || m_AirControl) {

			// If crouching
			if (crouch) {
				// Reduce the speed by the crouchSpeed multiplier
				move *= m_CrouchSpeed;

				// Disable one of the colliders when crouching
				if (m_CrouchDisableCollider != null)
					m_CrouchDisableCollider.enabled = false;
			} else {
				// Enable the collider when not crouching
				if (m_CrouchDisableCollider != null)
					m_CrouchDisableCollider.enabled = true;
			}

			// Move the character by finding the target velocity
			Vector3 targetVelocity = new Vector2(move * 10f, m_Rigidbody2D.velocity.y);
			// And then smoothing it out and applying it to the character
			m_Rigidbody2D.velocity = Vector3.SmoothDamp(m_Rigidbody2D.velocity, targetVelocity, ref velocity, m_MovementSmoothing);

			// If the input is moving the player right and the player is facing left...
			if (move > 0 && !m_FacingRight) {
				// ... flip the player.
				Flip();
			}
			// Otherwise if the input is moving the player left and the player is facing right...
			else if (move < 0 && m_FacingRight) {
				// ... flip the player.
				Flip();
			}
		}
		// If the player should jump...
		if (m_Grounded && jump) {
			// Add a vertical force to the player.
			m_Grounded = false;
			m_Rigidbody2D.AddForce(new Vector2(0f, m_JumpForce));
		}
	}


	private void Flip() {
		// Switch the way the player is labelled as facing.
		m_FacingRight = !m_FacingRight;

		// Multiply the player's x local scale by -1.
		Vector3 theScale = transform.localScale;
		theScale.x *= -1;
		transform.localScale = theScale;
	}
}

Player Move Controller

Input.GetAxisRaw("Horizontal") —— 获取横向移动量，x的正方向移动为1，x的负方向移动-1，站立不动为0

Input.GetButtonDown("Jump") —— 判断按下"Jump"的指令

Edit > Project Settings > Input Manager设定Input系统

例如：Jump通过space键触发

我们需要添加Crouch判定，触发爬行行为

using UnityEngine;

public class PlayerMoveController : MonoBehaviour {

	private CharacterController2D cc;

	private float move = 0f;
	private bool jump = false;
	private bool crouch = false;

	private void Awake() {
		cc = GetComponent<CharacterController2D>();
	}

	// Update is called once per frame
	void Update() {

		move = Input.GetAxisRaw("Horizontal");

		if (Input.GetButtonDown("Jump"))
			jump = true;
		
		if (Input.GetButtonDown("Crouch"))
			crouch = true;
		else if (Input.GetButtonUp("Crouch"))
			crouch = false;
	
	}

	private void FixedUpdate() {

		cc.Move(move, crouch, jump);
		jump = false;

	}

}

其他设置

1. Player脚本相关设置

​ 也可以通过Rigidbody调整物体的重力因素等，如Gravity Scale()、Collision Detection(刚体的碰撞检测模式)。

2. 设置Collider的Material（减少摩擦）

   在project面板中右键 > Create > Physics Material 2D，将Friction参数设置为0。

   拖动该material到collider上。

标签：crouch,SerializeField,move,private,2D,player,Unity,bool,Movement
来源： https://www.cnblogs.com/tamentaoyanwo/p/12826784.html