Citroen CN22 Key Cutting via Xhorse Dolphin XP-005

 Using Xhorse Dolphin XP005 Key Cutting Machine to cut a Citroen CN22 key should be installed with M3-B clamp.

Prepare an original key & a key blank.

Install the original key on M3 clamp beforehand.

Go to Xhorse app to control, press

Vehicle database >> Citroen >> All key blank >> CN22, 5 bitting, 830*370 >> OK >> Decode key >> Continue

Tip: please rotate the key to the position shown as pic.

Dolphin XP005 machine starts decoding…

When the key decoding is successful, it will tell the bitting codes on screen.

Replace the original key to install new key blank on clamp, press

Cutting key >> Continue

Dolphin XP005 machine starts cutting…

Wait until the key cutting is completed.

Take out the key to have a try, it is same as original one, and it does work.

Done!

It is quite simple to cut a Citroen CN22 key via Dolphin XP005 Automatic Machine, it takes me only 5 minutes to finish.

https://www.vvdishop.com/

标签：via,005,Xhorse,Dolphin,CN22,key,Citroen,XP005,original
来源： https://www.cnblogs.com/Cardiagnosis/p/14822003.html