v4l2架构专题模块crop及selection分析 --- 帧数据怎么处理?
作者:互联网
Linux v4l2架构学习总链接
写到最后了,突然想起来帧数据是怎么处理的?从buffer中裁剪吗?
static int rkcif_stream_start(struct rkcif_stream *stream)
{
...
if (stream->crop_enable) {
dev->channels[stream->id].crop_en = 1;
dev->channels[stream->id].crop_st_x = stream->crop[CROP_SRC_ACT].left;
dev->channels[stream->id].crop_st_y = stream->crop[CROP_SRC_ACT].top;
dev->channels[stream->id].width = stream->crop[CROP_SRC_ACT].width;
dev->channels[stream->id].height = stream->crop[CROP_SRC_ACT].height;
} else {
dev->channels[stream->id].crop_st_y = 0;
dev->channels[stream->id].crop_st_x = 0;
dev->channels[stream->id].width = stream->pixm.width;
dev->channels[stream->id].height = stream->pixm.height;
dev->channels[stream->id].crop_en = 0;
}
rkcif_write_register(dev, CIF_REG_DVP_CROP,
dev->channels[stream->id].crop_st_y << CIF_CROP_Y_SHIFT |
dev->channels[stream->id].crop_st_x);
...
}
可以看到crop_enable满足的时候,代码中将值给了crop_st_x,crop_st_y,最后写到了CIF_REG_DVP_CROP寄存器中
所以这里可以认为是硬件操作
如果硬件不支持的话,会出现什么情况?
这里找到了imx6的代码,明确的写了不支持crop 功能...
static int mx6s_vidioc_cropcap(struct file *file, void *fh,
struct v4l2_cropcap *a)
{
struct mx6s_csi_dev *csi_dev = video_drvdata(file);
if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
return -EINVAL;
dev_dbg(csi_dev->dev, "VIDIOC_CROPCAP not implemented\n");
return 0;
}
static int mx6s_vidioc_g_crop(struct file *file, void *priv,
struct v4l2_crop *a)
{
struct mx6s_csi_dev *csi_dev = video_drvdata(file);
if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
return -EINVAL;
dev_dbg(csi_dev->dev, "VIDIOC_G_CROP not implemented\n");
return 0;
}
static int mx6s_vidioc_s_crop(struct file *file, void *priv,
const struct v4l2_crop *a)
{
struct mx6s_csi_dev *csi_dev = video_drvdata(file);
if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
return -EINVAL;
dev_dbg(csi_dev->dev, "VIDIOC_S_CROP not implemented\n");
return 0;
}
标签:channels,selection,struct,stream,dev,---,crop,id 来源: https://blog.csdn.net/ldl617/article/details/116125175