其他分享
首页 > 其他分享> > 【元胞自动机】元胞自动机之模拟HIV传染【Matlab 169期】

【元胞自动机】元胞自动机之模拟HIV传染【Matlab 169期】

作者:互联网

一、简介

1、模型介绍
元胞自动机就是类似于一个系统,各个单元,即元胞都有联系,但整体的系统又对各个小的单元产生影响,这影响便可定义为规则。而我们的目的就是找到这些规则来进行预测未来系统的发展。(通过计算机的计算,来模拟一个复杂的自然过程)

元胞自动机是一种时间、空间、状态都离散,空间相互作用和时间因果关系为局部的网格动力学模型,具有模拟复杂系统时空演化过程的能力。

元胞自动机(CA)是一种用来仿真局部规则和局部联系的方法。典型的元

胞自动机是定义在网格上的,每一个点上的网格代表一个元胞与一种有限的状

态。变化规则适用于每一个元胞并且同时进行。

组成:

元胞:一个元胞相当于一个储存元件、可以记录状态

元胞空间:分为一维、二维、三维

状态和初始状态:就是初始的状态领域:一个元胞的领域由其周围的元胞组成

转换规则:状态转移的函数(多个规则一起作用)(典型的变化规则,决定于元胞的状态,以及其( 4 或 8 )邻居的状态。)

简单讲解:https://wk.baidu.com/view/ddf76d8c50e2524de4187e45?pcf=2&bfetype=new

2、模型适用范围或案例
1、容易与GIS、遥感数据处理等系统结合

2、城市发展演变、土地利用变化

3、应用于物理模拟,生物模拟等领域

4、森林火灾模拟

三、模型输入变量解释
元胞自动机仿真需要理解三点:

1、元胞:在matlab中可以理解为矩阵中的一点或多点组成的方形块,一般我们用矩阵中的一点代表一个元胞。

2、变化规则:元胞的变化规则决定元胞下一刻的状态。

3、元胞的状态:元胞的状态是自定义的,通常是对立的状态,比如生物的存活状态或死亡状态,红灯或绿灯,该点有障碍物或者没有障碍物等等。

3、模型输出变量解释
输出的是一个演化过程演化结束后的路径

二、源代码

%% NOTE
 
% Total runtime for this code was about 7.5 hours on the computer used by
% the original researcher (for 1000 run average of 3 different adherence 
% values).
% This runtime is expected to vary from device to device, and is being used
% here to obtain a general comparison for runtime for the different
% models. It is not for a universal runtime value
 
% When run, this code does not display anything at the beginning. However,
% it will produce 2 graphs for each P_adh value every 2.5 hours approx.
 
%% Documentation
 
% n             size of each dimension of our square cellular automata grid
% P_HIV         fraction (probability) of cells initially infected by virus
% P_i           probability of a healthy cell becoming infected if its
%               neighborhood contains 1 I1 cell or X I2 cells
% P_v           probability of a healthy cell becoming infected by coming
%               in contact with a virus randomly (not from its
%               neighborhood)
% P_RH          Probability of a dead cell becoming replaced by a healthy
%               cell
% P_RI          Probability of a dead cell becoming replaced by an infected
%               cell
% P_T1          Probability of a healthy cell receiving therapy 1
% P_iT1         Probability of a healthy cell receiving therapy 1 of
%               becoming infected
% P_T2          Probability of a healthy cell receiving therapy 2
% P_iT2         Probability of a healthy cell receiving therapy 2 of
%               becoming infected
% X             Number of I2 cells in the neighborhood of an H cell that
%               can cause it to become infected
% tau1          tau1 is the number of timesteps it takes for an acute
%               infected cell to become latent.
% tau2          tau2 is the number of timesteps it takes for a latent
%               infected cell to become dead.
% tau3          tau3 is the number of timesteps after which a healthy
%               cell receiving dual therapy becomes a healthy cell again
% totalsteps    totalsteps is the total number of steps of the CA (the
%               total number of weeks of simulations)
% grid          our cellular automata (CA) grid
% tempgrid      tempgrid is a temporary grid full of random numbers that is
%               used to randomly add different states to our CA grid.
% taugrid       taugrid is a grid the same size as our CA grid that stores
%               the number of timesteps that a cell has been in state I_1.
%               If the number reaches tau1, then the state changes to I_2.
% state         state is a [9 x totalsteps] size matrix that stores
%               the total number of cells in each state at each timestep
%               and the last 2 rows store total healthy and total infected
%               cells
% timestep      each simulation step of the cellular automata
%               1 timestep = 1 week of time in the real world
% nextgrid      nextgrid is a temporary grid. It is a copy of the CA grid
%               from the previous simulation. It stores all the CA rule
%               updates of the current timestep and stores it all back to
%               the grid to display.
 
%% Clean-up
 
clc;            % clears command window
clear all;      % clears workspace and deletes all variables
% close all;      % closes all open figures
 
%% Parameters
 
n = 100;            % meaning that our grid will have the dimensions n x n
P_HIV = 0.05;       % initial grid will have P_hiv acute infected cells
P_i = 0.997;        % probability of infection by neighbors
P_v = 0.00001;      % probability of infection by random viral contact
P_RH = 0.99;        % probability of dead cell being replaced by healthy
P_RI = 0.00001;     % probability of dead cell being replaced by infected
P_T1 = 0.70;        % probability of cell receiving therapy 1
P_iT1 = 0.07;       % probability of infection of healthy with therapy 1
P_T2 = 0.50;        % probability of cell receiving therapy 2
P_iT2 = 0.05;       % probability of infection of healthy with therapy 2
X = 4;              % there must be at least X I_2 neighbors to infect cell
tau1 = 4;           % time delay for I_1 cell to become I_2 cell
tau2 = 1;           % time delay for I_2 cell to become D cell
tau3 = 1;           % time delay for H_Tb cell to become H cell
totalsteps = 600;   % total number of weeks of simulation to be performed
T_start = 20;       % The medication therapy will start on week T_start
totalruns = 1000;   % total number of times to run the simulation to get an
% average
 
%% States
 
% State 1: H:       Healthy                     (Color- Green)
% State 2: H_T1:    Healthy with therapy 1      (Color- Red)
% State 3: H_T2:    Healthy with therapy 2      (Color- Red)
% State 4: H_Tb:    Healthy with dual therapy   (Color- Red)
% State 5: I_1:     Active Infected             (Color- Cyan)
% State 6: I_2:     Latent Infected             (Color- Blue)
% State 7: D:       Dead                        (Color- Black)
 
%% Simulation
 
for P_adh = 0.5:0.2:0.9
    
    state1 = zeros(totalruns,totalsteps);
    state2 = zeros(totalruns,totalsteps);
    state3 = zeros(totalruns,totalsteps);
    state4 = zeros(totalruns,totalsteps);
    state5 = zeros(totalruns,totalsteps);
    state6 = zeros(totalruns,totalsteps);
    state7 = zeros(totalruns,totalsteps);
    
    for run = 1:totalruns
    
    
    state1dev = std(state1);
    state2dev = std(state2);
    state3dev = std(state3);
    state4dev = std(state4);
    state5dev = std(state5);
    state6dev = std(state6);
    state7dev = std(state7);
    state8dev = state1dev + state2dev + state3dev + state4dev;
    state9dev = state5dev + state6dev;
    
    state1mean = mean(state1);
    state2mean = mean(state2);
    state3mean = mean(state3);
    state4mean = mean(state4);
    state5mean = mean(state5);
    state6mean = mean(state6);
    state7mean = mean(state7);
    state8mean = state1mean + state2mean + state3mean + state4mean;
    state9mean = state5mean + state6mean;
    
    % The following lines of code are to display a graph of each state of
    % cells during simulation
    set(figure, 'OuterPosition', [200 100 700 500]) % sets figure window size
    plot( 1:totalsteps , state1mean, 'g', ...
        1:totalsteps , state2mean, 'r', ...
        1:totalsteps , state3mean, 'm', ...
        1:totalsteps , state4mean, 'y', ...
        1:totalsteps , state5mean, 'c', ...
        1:totalsteps , state6mean, 'b', ...
        1:totalsteps , state7mean, 'k' , 'linewidth', 2 );
    xlim([0 600]);
    ylim([0 10000]);
    hold on;
    gridxy(20,'Color',[0.8 0.5 0.0],'linewidth',5) ;
    errorbar( 1:15:totalsteps , state1mean(1:15:totalsteps), state1dev(1:15:totalsteps), 'g');
    errorbar( 1:15:totalsteps , state2mean(1:15:totalsteps), state2dev(1:15:totalsteps), 'r');
    errorbar( 1:15:totalsteps , state3mean(1:15:totalsteps), state3dev(1:15:totalsteps), 'm');
    errorbar( 1:15:totalsteps , state4mean(1:15:totalsteps), state4dev(1:15:totalsteps), 'y');
    errorbar( 1:15:totalsteps , state5mean(1:15:totalsteps), state5dev(1:15:totalsteps), 'c');
    errorbar( 1:15:totalsteps , state6mean(1:15:totalsteps), state6dev(1:15:totalsteps), 'b');
    errorbar( 1:15:totalsteps , state7mean(1:15:totalsteps), state7dev(1:15:totalsteps), 'k');
    legend( 'Therapy start week', 'Healthy', 'Healthy with Therapy1', 'Healthy with Therapy2', ...
        'Healthy with dual Therapy', 'Acute Infected', 'Latent Infected', ...
        'Dead', 'Location' ,'NorthEast' );
    saveas(gcf,strcat('Model3withAdherencePadh',num2str(P_adh*100),'Graph1.pdf'));
    
    
    % The following lines of code are to display a graph of each state of
    % cells during simulation
    set(figure, 'OuterPosition', [200 100 700 500]) % sets figure window size
    plot( 1:totalsteps , state8mean, 'g', ...
        1:totalsteps , state9mean, 'b', ...
        1:totalsteps , state7mean, 'k' , 'linewidth', 2 );
    xlim([0 600]);
    ylim([0 10000]);
    hold on;
    gridxy(20,'Color',[0.8 0.5 0.0],'linewidth',5) ;
    errorbar( 1:15:totalsteps , state8mean(1:15:totalsteps), state8dev(1:15:totalsteps), 'g');
    errorbar( 1:15:totalsteps , state9mean(1:15:totalsteps), state9dev(1:15:totalsteps), 'b');
    errorbar( 1:15:totalsteps , state7mean(1:15:totalsteps), state7dev(1:15:totalsteps), 'k');
    legend( 'Therapy start week', 'Healthy', 'Infected', 'Dead', ...
        'Location' ,'NorthEast' );
    saveas(gcf,strcat('Model3withAdherencePadh',num2str(P_adh*100),'Graph2.pdf'));
    
end

三、运行结果

在这里插入图片描述
在这里插入图片描述

四、备注

完整代码或者代写添加QQ912100926
往期回顾>>>>>>
【元胞自动机】元胞自动机之双车道交通流模型含靠右行驶【Matlab 164期】
【元胞自动机】元胞自动机的晶体生长【Matlab 165期】
【元胞自动机】元胞自动机之求解城市小区开放对周边道路通行的影响研究【Matlab 166期】
【元胞自动机】元胞自动机的图像处理【Matlab 167期 】
【元胞自动机】元胞自动机的森林大火【Matlab 168期】

标签:totalsteps,15,HIV,healthy,cell,元胞,自动机
来源: https://blog.csdn.net/m0_54742769/article/details/113725740