首页 > 其他分享> > ZK实现SASL认证+Kafka连接ZK

ZK实现SASL认证+Kafka连接ZK

2020-12-26 15:32:08 作者：互联网

ZK实现SASL认证+Kafka连接ZK

关键词:zk sasl kfaka 未授权认证

参考文档:

搭建Kafka集群时, 对ZooKeeper认证与权限控制
http://ohmycat.me/2019/05/08/kafka-with-zookeeper-authentication.html
SASL authentication for ZooKeeper.
https://cwiki.apache.org/confluence/display/ZOOKEEPER/ZooKeeper+and+SASL

服务器IP列表:

192.168.132.11
192.168.132.12
192.168.132.13

镜像版本:

zookeeper:3.6.1
wurstmeister/kafka:2.13-2.6.0

1. zookeeper

1.1 设置环境变量

# 备份配置文件
cp -p ~/.bashrc ~/.bashrc.20201218

# 编辑~/.bashrc,在文件尾部增加如下内容:
ls_iface=`ls -l /sys/class/net/ |grep -v virtual |grep root|gawk '{print $9}'`
MYIP=`ip -h -4 -o address |grep $ls_iface|gawk '{print $4}'|sed 's/\// /'|gawk '{print $1}'`
IMAGE_NAME=`echo $MYIP |gawk -F. '{print $4}'`
export MYIP IMAGE_NAME

# 为每台服务器设置ZKID。
# 注意：每台服务器的ID必需不同且与配置文件中的ZOO_SERVERS的server.x的x要匹配
export myid=1

1.2 让环境变量生效

source ~/.bashrc

# 检查环境变量是否效
echo "IP:$MYIP 容器序号:$IMAGE_NAME 服务器ID:$myid"

1.3 (可选)设置防火墙

firewall-cmd --permanent --add-port=2888/tcp
firewall-cmd --permanent --add-port=3888/tcp
firewall-cmd --permanent --add-port=2181/tcp
firewall-cmd --permanent --add-port=9092/tcp
firewall-cmd --permanent --add-port=2182/tcp
firewall-cmd --reload

1.4 创建存放zk数据的目录

mkdir -p /myhome/zk/data
mkdir -p /myhome/zk/datalog
mkdir -p /myhome/zk/conf/jaas

1.5 创建启动脚本`~/zk-kafka/firststartzk.sh`,内容如下:

#!/bin/bash

case ${myid} in
1)
docker run -d --name=myzk_${IMAGE_NAME} \
--restart=always \
-p 2888:2888 \
-p 3888:3888 \
-p 2181:2181 \
-e ZOO_MY_ID=${myid} \
-e ZOO_SERVERS="server.1=0.0.0.0:2888:3888;2181 server.2=192.168.132.12:2888:3888;2181 server.3=192.168.132.13:2888:3888;2181" \
-v /myhome/zk/data:/data \
-v /myhome/zk/datalog:/datalog \
-v /etc/localtime:/etc/localtime \
zookeeper:3.6.1
;;
2)
docker run -d --name=myzk_${IMAGE_NAME} \
--restart=always \
-p 2888:2888 \
-p 3888:3888 \
-p 2181:2181 \
-e ZOO_MY_ID=${myid} \
-e ZOO_SERVERS="server.1=192.168.132.11:2888:3888;2181 server.2=0.0.0.0:2888:3888;2181 server.3=192.168.132.13:2888:3888;2181" \
-v /myhome/zk/data:/data \
-v /myhome/zk/datalog:/datalog \
-v /etc/localtime:/etc/localtime \
zookeeper:3.6.1
;;
3)
docker run -d --name=myzk_${IMAGE_NAME} \
--restart=always \
-p 2888:2888 \
-p 3888:3888 \
-p 2181:2181 \
-e ZOO_MY_ID=${myid} \
-e ZOO_SERVERS="server.1=192.168.132.11:2888:3888;2181 server.2=192.168.132.12:2888:3888;2181 server.3=0.0.0.0:2888:3888;2181" \
-v /myhome/zk/data:/data \
-v /myhome/zk/datalog:/datalog \
-v /etc/localtime:/etc/localtime \
zookeeper:3.6.1
;;
*)
echo "can not get myid value"
;;
esac

1.6 启动ZK集群,获取配置文件

cd ~/zk-kafka
./firststartzk.sh

# 拷贝ZK配置文件
docker cp myzk_${IMAGE_NAME}:/conf /myhome/zk

# 停止容器
docker stop myzk_${IMAGE_NAME}
docker rm myzk_${IMAGE_NAME}

1.7 修改配置文件`/myhome/zk/conf/zoo.cfg`

实现server-server 和 client-server认证

tee -a >>/myhome/zk/conf/zoo.cfg<<EOF

# server-server authentication
quorum.auth.enableSasl=true
quorum.auth.learnerRequireSasl=true
quorum.auth.serverRequireSasl=true
quorum.auth.learner.saslLoginContext=QuorumLearner
quorum.auth.server.saslLoginContext=QuorumServer
quorum.cnxn.threads.size=6

# client-server authentication
requireClientAuthScheme=sasl
authProvider.1=org.apache.zookeeper.server.auth.SASLAuthenticationProvider
authProvider.2=org.apache.zookeeper.server.auth.SASLAuthenticationProvider
authProvider.3=org.apache.zookeeper.server.auth.SASLAuthenticationProvider
EOF

1.8 创建JAAS配置文件`/myhome/zk/conf/jaas/zk_server.conf`,内容如下:

此文件中的Server用于客户端(比如zkClient.sh或kafka)连接，QuorumServer和QuorumLearner用于服务端之间的连接

tee -a >/myhome/zk/conf/jaas/zk_server.conf<<EOF
Server{
    org.apache.zookeeper.server.auth.DigestLoginModule required
    user_test="test123";
};

QuorumServer {
    org.apache.zookeeper.server.auth.DigestLoginModule required
    user_test="test123";
};

QuorumLearner {
    org.apache.zookeeper.server.auth.DigestLoginModule required
    username="test"
    password="test123";
};
EOF

1.9 创建JAAS配置文件`/myhome/zk/config/jaas/zk_client.conf`,增加如下内容:

此文件用于客户端软件连接(比如zkClient.sh或kafka)

tee -a >/myhome/zk/config/jaas/zk_client.conf<<EOF
Client {
       org.apache.zookeeper.server.auth.DigestLoginModule required
       username="test"
       password="test123";
};
EOF

1.10 创建正式启动ZK的脚本`~/zk-kafka/startzk.sh`

#!/bin/bash

case ${myid} in
1)
docker run -d --name=myzk_${IMAGE_NAME} \
--restart=always \
-p 2888:2888 \
-p 3888:3888 \
-p 2181:2181 \
-e ZOO_MY_ID=${myid} \
-e ZOO_SERVERS="server.1=0.0.0.0:2888:3888;2181 server.2=192.168.132.12:2888:3888;2181 server.3=192.168.132.13:2888:3888;2181" \
-e SERVER_JVMFLAGS="-Djava.security.auth.login.config=/conf/jaas/zk_server.conf" \
-e CLIENT_JVMFLAGS="-Djava.security.auth.login.config=/conf/jaas/zk_client.conf" \
-v /myhome/zk/data:/data \
-v /myhome/zk/datalog:/datalog \
-v /etc/localtime:/etc/localtime \
-v /myhome/zk/conf:/conf \
zookeeper:3.6.1
;;
2)
docker run -d --name=myzk_${IMAGE_NAME} \
--restart=always \
-p 2888:2888 \
-p 3888:3888 \
-p 2181:2181 \
-e ZOO_MY_ID=${myid} \
-e ZOO_SERVERS="server.1=192.168.132.11:2888:3888;2181 server.2=0.0.0.0:2888:3888;2181 server.3=192.168.132.13:2888:3888;2181" \
-e SERVER_JVMFLAGS="-Djava.security.auth.login.config=/conf/jaas/zk_server.conf" \
-e CLIENT_JVMFLAGS="-Djava.security.auth.login.config=/conf/jaas/zk_client.conf" \
-v /myhome/zk/data:/data \
-v /myhome/zk/datalog:/datalog \
-v /etc/localtime:/etc/localtime \
-v /myhome/zk/conf:/conf \
zookeeper:3.6.1
;;
3)
docker run -d --name=myzk_${IMAGE_NAME} \
--restart=always \
-p 2888:2888 \
-p 3888:3888 \
-p 2181:2181 \
-e ZOO_MY_ID=${myid} \
-e ZOO_SERVERS="server.1=192.168.132.11:2888:3888;2181 server.2=192.168.132.12:2888:3888;2181 server.3=0.0.0.0:2888:3888;2181" \
-e SERVER_JVMFLAGS="-Djava.security.auth.login.config=/conf/jaas/zk_server.conf" \
-e CLIENT_JVMFLAGS="-Djava.security.auth.login.config=/conf/jaas/zk_client.conf" \
-v /myhome/zk/data:/data \
-v /myhome/zk/datalog:/datalog \
-v /etc/localtime:/etc/localtime \
-v /myhome/zk/conf:/conf \
zookeeper:3.6.1
;;
*)
echo "can not get myid value"
;;
esac

1.11 启动ZK并查看日志

cd ~/zk-kafka
./startzk.sh

# 查看日志
docker logs -f myzk_${IMAGE_NAME}
或
docker logs -f myzk_${IMAGE_NAME} |grep Sasl

输出类似如下:

2020-12-26 03:38:33,964 [myid:1] - INFO  [main:QuorumPeer@2463] - quorum.auth.enableSasl set to true
2020-12-26 03:38:33,964 [myid:1] - INFO  [main:QuorumPeer@2450] - quorum.auth.serverRequireSasl set to true
2020-12-26 03:38:33,964 [myid:1] - INFO  [main:QuorumPeer@2455] - quorum.auth.learnerRequireSasl set to true
2020-12-26 03:38:34,135 [myid:1] - INFO  [QuorumConnectionThread-[myid=1]-2:SaslQuorumServerCallbackHandler@143] - Successfully authenticated learner: authenticationID=test;  authorizationID=test.
2020-12-26 03:38:34,136 [myid:1] - INFO  [QuorumConnectionThread-[myid=1]-1:SaslQuorumAuthLearner@142] - Successfully completed the authentication using SASL. server addr: /192.168.132.12:3888, status: SUCCESS
2020-12-26 03:38:34,136 [myid:1] - INFO  [QuorumConnectionThread-[myid=1]-2:SaslQuorumAuthServer@110] - Successfully completed the authentication using SASL. learner addr: /192.168.132.12:55130
2020-12-26 03:38:34,138 [myid:1] - INFO  [QuorumConnectionThread-[myid=1]-3:SaslQuorumServerCallbackHandler@143] - Successfully authenticated learner: authenticationID=test;  authorizationID=test.
2020-12-26 03:38:34,138 [myid:1] - INFO  [QuorumConnectionThread-[myid=1]-3:SaslQuorumAuthServer@110] - Successfully completed the authentication using SASL. learner addr: /192.168.132.13:35982
2020-12-26 03:38:34,373 [myid:1] - INFO  [QuorumPeer[myid=1](plain=0.0.0.0:2181)(secure=disabled):SaslQuorumAuthLearner@142] - Successfully completed the authentication using SASL. server addr: /192.168.132.13:2888, status: SUCCESS

1.12 进入容器

docker exec -it myzk_${IMAGE_NAME} /bin/bash

# 执行客户端工具
bin/zkCli.sh

输出类似如下:

Welcome to ZooKeeper!
JLine support is enabled
2020-12-26 04:01:15,121 [myid:localhost:2181] - INFO  [main-SendThread(localhost:2181):Login@320] - Client successfully logged in.
2020-12-26 04:01:15,126 [myid:localhost:2181] - INFO  [main-SendThread(localhost:2181):SecurityUtils@70] - Client will use DIGEST-MD5 as SASL mechanism.
[zk: localhost:2181(CONNECTING) 0] 2020-12-26 04:01:15,173 [myid:localhost:2181] - INFO  [main-SendThread(localhost:2181):ClientCnxn$SendThread@1154] - Opening socket connection to server localhost/127.0.0.1:2181.
2020-12-26 04:01:15,174 [myid:localhost:2181] - INFO  [main-SendThread(localhost:2181):ClientCnxn$SendThread@1156] - SASL config status: Will attempt to SASL-authenticate using Login Context section 'Client'
2020-12-26 04:01:15,182 [myid:localhost:2181] - INFO  [main-SendThread(localhost:2181):ClientCnxn$SendThread@986] - Socket connection established, initiating session, client: /127.0.0.1:40366, server: localhost/127.0.0.1:2181
2020-12-26 04:01:15,206 [myid:localhost:2181] - INFO  [main-SendThread(localhost:2181):ClientCnxn$SendThread@1420] - Session establishment complete on server localhost/127.0.0.1:2181, session id = 0x100003c85fe0000, negotiated timeout = 30000

# 如果提示符出现connected字样,则说明连接服务端成功
[zk: localhost:2181(CONNECTED) 0]

# 列出所有子节点
zk > ls -R /

到此为止，实现了ZK的server-server 和 client-server的认证

2. kafka

2.1 创建存放数据的目录

mkdir -p /myhome/kafka/data
mkdir -p /myhome/kafka/logs
mkdir -p /myhome/kafka/jaas

2.2 创建JAAS配置文件`/myhome/kafka/jaas/zk_client.conf`,增加如下内容:

tee -a >>/myhome/kafka/jaas/zk_client.conf<<EOF
Client {
       org.apache.zookeeper.server.auth.DigestLoginModule required
       username="test"
       password="test123";
};
EOF

2.3 启动kafka

docker run -d --name=mykafka_${IMAGE_NAME} \
--restart=always \
-p 9092:9092 \
-v /etc/localtime:/etc/localtime \
-v /myhome/kafka/data:/kafka \
-v /myhome/kafka/logs:/opt/kafka/logs \
-v /myhome/kafka/jaas:/mnt \
-e KAFKA_ADVERTISED_HOST_NAME=${MYIP} \
-e HOST_IP=${MYIP} \
-e KAFKA_ADVERTISED_PORT=9092 \
-e KAFKA_ZOOKEEPER_CONNECT=192.168.132.11:2181,192.168.132.12:2181,192.168.132.13:2181 \
-e KAFKA_BROKER_ID=${myid} \
-e KAFKA_OPTS="-Djava.security.auth.login.config=/mnt/zk_client.conf" \
-e KAFKA_ZOOKEEPER_SET_ACT=true \
wurstmeister/kafka:2.13-2.6.0

2.4 查看日志

docker logs -f mykafka_${IMAGE_NAME}

2.5 验证kafka

# 进入容器
docker exec -it mykafka_${IMAGE_NAME} /bin/bash

cd /opt/kafka

# 创建topic
bin/kafka-topics.sh --create --zookeeper ${MYIP}:2181 --replication-factor 1 --partitions 1 --topic test

# 查看Topic
bin/kafka-topics.sh --list --zookeeper ${MYIP}:2181

# 生产者：向Kafka发送消息
bin/kafka-console-producer.sh --broker-list 0.0.0.0:9092 --topic test

# 消费者: 消费刚刚发送的消息
bin/kafka-console-consumer.sh --bootstrap-server 0.0.0.0:9092 --topic test --from-beginning

2.6 验证ZK

# 进入容器
docker exec -it myzk_${IMAGE_NAME} /bin/bash

# 执行客户端工具
bin/zkCli.sh

# 列出所有子节点
zk> ls -R /

# 查看之前创建的主题:test的ACL
zk> getAcl /brokers/topics/test

输出如下:

# 表示采用了sasl认证，用户名是test,权限是cdrwa(即全部权限)
'sasl,'test
: cdrwa
# 表示任意人均可访问,权限是r(即只读)
'world,'anyone
: r

标签：zk,--,2888,ZK,Kafka,myhome,2181,myid,SASL
来源： https://blog.csdn.net/mosaicwang/article/details/111748283

ZK实现SASL认证+Kafka连接ZK

ZK实现SASL认证+Kafka连接ZK

1. zookeeper

1.1 设置环境变量

1.2 让环境变量生效

1.3 (可选)设置防火墙

1.4 创建存放zk数据的目录

1.5 创建启动脚本~/zk-kafka/firststartzk.sh,内容如下:

1.6 启动ZK集群,获取配置文件

1.7 修改配置文件/myhome/zk/conf/zoo.cfg

1.8 创建JAAS配置文件/myhome/zk/conf/jaas/zk_server.conf,内容如下:

1.9 创建JAAS配置文件/myhome/zk/config/jaas/zk_client.conf,增加如下内容:

1.10 创建正式启动ZK的脚本~/zk-kafka/startzk.sh

1.11 启动ZK并查看日志

1.12 进入容器

2. kafka

2.1 创建存放数据的目录

2.2 创建JAAS配置文件/myhome/kafka/jaas/zk_client.conf,增加如下内容:

2.3 启动kafka

2.4 查看日志

2.5 验证kafka

2.6 验证ZK

1.5 创建启动脚本`~/zk-kafka/firststartzk.sh`,内容如下:

1.7 修改配置文件`/myhome/zk/conf/zoo.cfg`

1.8 创建JAAS配置文件`/myhome/zk/conf/jaas/zk_server.conf`,内容如下:

1.9 创建JAAS配置文件`/myhome/zk/config/jaas/zk_client.conf`,增加如下内容:

1.10 创建正式启动ZK的脚本`~/zk-kafka/startzk.sh`

2.2 创建JAAS配置文件`/myhome/kafka/jaas/zk_client.conf`,增加如下内容: