其他分享
首页 > 其他分享> > 三、仿真环境下移动机器人的导航

三、仿真环境下移动机器人的导航

作者:互联网

1、导航功能包简介

导航的关键包含机器人定位和路径规划两大部分,针对这两部分核心内容,ROS提供了以下两个功能包:

(1)move_base: 实现机器人导航中最优路径规划。

(2)amcl: 实现二维地图中的机器人定位。

在上述两个功能包的基础上,ROS提供一套完整的导航功能框架,如下图所示:

 

 导航框架所包含的功能包很多,可以直接利用以下指令进行完整安装:

 

sudo apt-get install ros-kinetic-navigation

 

2、创建move_base启动文件move_base.launch,其内容如下:

 1 <launch>
 2 
 3     <param name="use_sim_time" value="true" />
 4 
 5     <!-- 设置地图的配置文件 -->
 6     <arg name="map" default="gmapping_map.yaml" />
 7 
 8     <!-- 运行地图服务器,并且加载设置的地图-->
 9     <node name="map_server" pkg="map_server" type="map_server" args="$(find slam_robot)/maps/$(arg map)"/>
10 
11 
12     <!-- fake_move_base.launch中的内容,用来加载地图的配置文件 -->
13     <node pkg="move_base" type="move_base" respawn="false" name="move_base" output="screen" clear_params="true">
14         <rosparam file="$(find slam_robot)/config/fake/costmap_common_params.yaml" command="load" ns="global_costmap" />
15         <rosparam file="$(find slam_robot)/config/fake/costmap_common_params.yaml" command="load" ns="local_costmap" />
16         <rosparam file="$(find slam_robot)/config/fake/local_costmap_params.yaml" command="load" />
17         <rosparam file="$(find slam_robot)/config/fake/global_costmap_params.yaml" command="load" />
18         <rosparam file="$(find slam_robot)/config/fake/base_local_planner_params.yaml" command="load" />
19     </node>
20   
21      <!-- 运行虚拟定位,兼容AMCL输出 -->
22     <node pkg="fake_localization" type="fake_localization" name="fake_localization" output="screen" /> -->
23 
24 
25     <!-- 加入amcl启动文件,此处有了上面的节点,因此不用开启,此处注释掉
26     <include file = "$(find mrobot_navigation)/launch/amcl.launch" /> 
27     -->
28 
29     <!-- 对于虚拟定位,需要设置一个/odom与/map之间的静态坐标变换 -->
30     <node pkg="tf" type="static_transform_publisher" name="map_odom_broadcaster" args="0 0 0 0 0 0 /map /odom 100" />
31 
32 
33 </launch>
move_base.launch

其中需要加载几个导航过程的配置文件,其文件内容分别为:

(a)base_local_planner_params.yaml:

 1 controller_frequency: 3.0
 2 recovery_behavior_enabled: false
 3 clearing_rotation_allowed: false
 4 
 5 TrajectoryPlannerROS:
 6    max_vel_x: 0.5
 7    min_vel_x: 0.1
 8    max_vel_y: 0.0  # zero for a differential drive robot
 9    min_vel_y: 0.0
10    max_vel_theta: 1.0
11    min_vel_theta: -1.0
12    min_in_place_vel_theta: 0.4
13    escape_vel: -0.1
14    acc_lim_x: 1.5
15    acc_lim_y: 0.0  # zero for a differential drive robot
16    acc_lim_theta: 1.2
17 
18    holonomic_robot: false
19    yaw_goal_tolerance: 0.1 # about 6 degrees
20    xy_goal_tolerance: 0.05  # 5 cm
21    latch_xy_goal_tolerance: false
22    pdist_scale: 0.4
23    gdist_scale: 0.8
24    meter_scoring: true
25 
26    heading_lookahead: 0.325
27    heading_scoring: false
28    heading_scoring_timestep: 0.8
29    occdist_scale: 0.05
30    oscillation_reset_dist: 0.05
31    publish_cost_grid_pc: false
32    prune_plan: true
33 
34    sim_time: 1.0
35    sim_granularity: 0.05
36    angular_sim_granularity: 0.1
37    vx_samples: 8
38    vy_samples: 0  # zero for a differential drive robot
39    vtheta_samples: 20
40    dwa: true
41    simple_attractor: false
base_local_planner_params.yaml

(b)costmap_common_params.yaml:

 1 obstacle_range: 2.5
 2 raytrace_range: 3.0
 3 #footprint: [[0.175, 0.175], [0.175, -0.175], [-0.175, -0.175], [-0.175, 0.175]]
 4 #footprint_inflation: 0.01
 5 robot_radius: 0.3
 6 inflation_radius: 0.4
 7 max_obstacle_height: 0.6
 8 min_obstacle_height: 0.0
 9 observation_sources: scan
10 scan: {data_type: LaserScan, topic: /scan, marking: true, clearing: true, expected_update_rate: 0}
costmap_common_params.yaml

(c)global_costmap_params.yaml:

 1 global_costmap:
 2    global_frame: map
 3    robot_base_frame: base_footprint
 4    update_frequency: 1.0
 5    publish_frequency: 1.0
 6    static_map: true
 7    rolling_window: false
 8    resolution: 0.01
 9    transform_tolerance: 1.0
10    map_type: costmap
global_costmap_params.yaml

(d)local_costmap_params.yaml:

 1 local_costmap:
 2    global_frame: map
 3    robot_base_frame: base_footprint
 4    update_frequency: 3.0
 5    publish_frequency: 1.0
 6    static_map: true
 7    rolling_window: false
 8    width: 6.0
 9    height: 6.0
10    resolution: 0.01
11    transform_tolerance: 1.0
local_costmap_params.yaml

3、启动move_base.launch文件:

sudo roslaunch slam_robot move_base.launch

4、开启rviz

 

标签:仿真,false,costmap,robot,移动机器人,yaml,base,vel,导航
来源: https://www.cnblogs.com/hloay/p/13367544.html