fabric2.0 部署详解—（3）—配置并添加组织org3
作者：互联网
通过上面两篇文章我们已经成功安装了fabric的基本环境和并成功运行了官方提供的first-network示例，接下来我们手动加入一个组织，来更加深刻的认识first-network示例中各配置文件中的关系，以及如何添加一个组织
1.我们需要在crypto-config.yaml配置文件中加入组织3（org3）以便根据配置生成各组织和用户所需要的证书及密钥，加入的代码如下所示
# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#
# ---------------------------------------------------------------------------
# "OrdererOrgs" - Definition of organizations managing orderer nodes
# ---------------------------------------------------------------------------
OrdererOrgs:
# ---------------------------------------------------------------------------
# Orderer
# ---------------------------------------------------------------------------
- Name: Orderer
Domain: example.com
# ---------------------------------------------------------------------------
# "Specs" - See PeerOrgs below for complete description
# ---------------------------------------------------------------------------
Specs:
- Hostname: orderer
- Hostname: orderer2
- Hostname: orderer3
- Hostname: orderer4
- Hostname: orderer5
# ---------------------------------------------------------------------------
# "PeerOrgs" - Definition of organizations managing peer nodes
# ---------------------------------------------------------------------------
PeerOrgs:
# ---------------------------------------------------------------------------
# Org1
# ---------------------------------------------------------------------------
- Name: Org1
Domain: org1.example.com
EnableNodeOUs: true
# ---------------------------------------------------------------------------
# "Specs"
# ---------------------------------------------------------------------------
# Uncomment this section to enable the explicit definition of hosts in your
# configuration. Most users will want to use Template, below
#
# Specs is an array of Spec entries. Each Spec entry consists of two fields:
# - Hostname: (Required) The desired hostname, sans the domain.
# - CommonName: (Optional) Specifies the template or explicit override for
# the CN. By default, this is the template:
#
# "{{.Hostname}}.{{.Domain}}"
#
# which obtains its values from the Spec.Hostname and
# Org.Domain, respectively.
# ---------------------------------------------------------------------------
# Specs:
# - Hostname: foo # implicitly "foo.org1.example.com"
# CommonName: foo27.org5.example.com # overrides Hostname-based FQDN set above
# - Hostname: bar
# - Hostname: baz
# ---------------------------------------------------------------------------
# "Template"
# ---------------------------------------------------------------------------
# Allows for the definition of 1 or more hosts that are created sequentially
# from a template. By default, this looks like "peer%d" from 0 to Count-1.
# You may override the number of nodes (Count), the starting index (Start)
# or the template used to construct the name (Hostname).
#
# Note: Template and Specs are not mutually exclusive. You may define both
# sections and the aggregate nodes will be created for you. Take care with
# name collisions
# ---------------------------------------------------------------------------
Template:
Count: 2
# Start: 5
# Hostname: {{.Prefix}}{{.Index}} # default
# ---------------------------------------------------------------------------
# "Users"
# ---------------------------------------------------------------------------
# Count: The number of user accounts _in addition_ to Admin
# ---------------------------------------------------------------------------
Users:
Count: 1
# ---------------------------------------------------------------------------
# Org2: See "Org1" for full specification
# ---------------------------------------------------------------------------
- Name: Org2
Domain: org2.example.com
EnableNodeOUs: true
Template:
Count: 2
Users:
Count: 1
# ---------------------------------------------------------------------------
# Org3（此处为组织3的配置）
# ---------------------------------------------------------------------------
- Name: Org3
Domain: org3.example.com
EnableNodeOUs: true
Template:
Count: 2
Users:
Count: 1
2.接下来我们需要在configtx.yaml配置文件中添加我们的组织，此文件是组织、通道配置文件，用于定义组织和通道信息，并基于此文件生成排序系统创世块和通道创世块，具体代码如下所示
# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#
---
################################################################################
#
# Section: Organizations
#
# - This section defines the different organizational identities which will
# be referenced later in the configuration.
#
################################################################################
Organizations:
# SampleOrg defines an MSP using the sampleconfig. It should never be used
# in production but may be used as a template for other definitions
- &OrdererOrg
# DefaultOrg defines the organization which is used in the sampleconfig
# of the fabric.git development environment
Name: OrdererOrg
# ID to load the MSP definition as
ID: OrdererMSP
# MSPDir is the filesystem path which contains the MSP configuration
MSPDir: crypto-config/ordererOrganizations/example.com/msp
# Policies defines the set of policies at this level of the config tree
# For organization policies, their canonical path is usually
# /Channel/<Application|Orderer>/<OrgName>/<PolicyName>
Policies:
Readers:
Type: Signature
Rule: "OR('OrdererMSP.member')"
Writers:
Type: Signature
Rule: "OR('OrdererMSP.member')"
Admins:
Type: Signature
Rule: "OR('OrdererMSP.admin')"
OrdererEndpoints:
- orderer.example.com:7050
- &Org1
# DefaultOrg defines the organization which is used in the sampleconfig
# of the fabric.git development environment
Name: Org1MSP
# ID to load the MSP definition as
ID: Org1MSP
MSPDir: crypto-config/peerOrganizations/org1.example.com/msp
# Policies defines the set of policies at this level of the config tree
# For organization policies, their canonical path is usually
# /Channel/<Application|Orderer>/<OrgName>/<PolicyName>
Policies:
Readers:
Type: Signature
Rule: "OR('Org1MSP.admin', 'Org1MSP.peer', 'Org1MSP.client')"
Writers:
Type: Signature
Rule: "OR('Org1MSP.admin', 'Org1MSP.client')"
Admins:
Type: Signature
Rule: "OR('Org1MSP.admin')"
Endorsement:
Type: Signature
Rule: "OR('Org1MSP.peer')"
# leave this flag set to true.
AnchorPeers:
# AnchorPeers defines the location of peers which can be used
# for cross org gossip communication. Note, this value is only
# encoded in the genesis block in the Application section context
- Host: peer0.org1.example.com
Port: 7051
- &Org2
# DefaultOrg defines the organization which is used in the sampleconfig
# of the fabric.git development environment
Name: Org2MSP
# ID to load the MSP definition as
ID: Org2MSP
MSPDir: crypto-config/peerOrganizations/org2.example.com/msp
# Policies defines the set of policies at this level of the config tree
# For organization policies, their canonical path is usually
# /Channel/<Application|Orderer>/<OrgName>/<PolicyName>
Policies:
Readers:
Type: Signature
Rule: "OR('Org2MSP.admin', 'Org2MSP.peer', 'Org2MSP.client')"
Writers:
Type: Signature
Rule: "OR('Org2MSP.admin', 'Org2MSP.client')"
Admins:
Type: Signature
Rule: "OR('Org2MSP.admin')"
Endorsement:
Type: Signature
Rule: "OR('Org2MSP.peer')"
AnchorPeers:
# AnchorPeers defines the location of peers which can be used
# for cross org gossip communication. Note, this value is only
# encoded in the genesis block in the Application section context
- Host: peer0.org2.example.com
Port: 9051
- &Org3
# DefaultOrg defines the organization which is used in the sampleconfig
# of the fabric.git development environment
Name: Org3MSP
# ID to load the MSP definition as
ID: Org3MSP
MSPDir: crypto-config/peerOrganizations/org3.example.com/msp
# Policies defines the set of policies at this level of the config tree
# For organization policies, their canonical path is usually
# /Channel/<Application|Orderer>/<OrgName>/<PolicyName>
Policies:
Readers:
Type: Signature
Rule: "OR('Org3MSP.admin', 'Org3MSP.peer', 'Org3MSP.client')"
Writers:
Type: Signature
Rule: "OR('Org3MSP.admin', 'Org3MSP.client')"
Admins:
Type: Signature
Rule: "OR('Org3MSP.admin')"
Endorsement:
Type: Signature
Rule: "OR('Org3MSP.peer')"
AnchorPeers:
# AnchorPeers defines the location of peers which can be used
# for cross org gossip communication. Note, this value is only
# encoded in the genesis block in the Application section context
- Host: peer0.org3.example.com
Port: 11051
################################################################################
#
# SECTION: Capabilities
#
# - This section defines the capabilities of fabric network. This is a new
# concept as of v1.1.0 and should not be utilized in mixed networks with
# v1.0.x peers and orderers. Capabilities define features which must be
# present in a fabric binary for that binary to safely participate in the
# fabric network. For instance, if a new MSP type is added, newer binaries
# might recognize and validate the signatures from this type, while older
# binaries without this support would be unable to validate those
# transactions. This could lead to different versions of the fabric binaries
# having different world states. Instead, defining a capability for a channel
# informs those binaries without this capability that they must cease
# processing transactions until they have been upgraded. For v1.0.x if any
# capabilities are defined (including a map with all capabilities turned off)
# then the v1.0.x peer will deliberately crash.
#
################################################################################
Capabilities:
# Channel capabilities apply to both the orderers and the peers and must be
# supported by both.
# Set the value of the capability to true to require it.
Channel: &ChannelCapabilities
# V2_0 capability ensures that orderers and peers behave according
# to v2.0 channel capabilities. Orderers and peers from
# prior releases would behave in an incompatible way, and are therefore
# not able to participate in channels at v2.0 capability.
# Prior to enabling V2.0 channel capabilities, ensure that all
# orderers and peers on a channel are at v2.0.0 or later.
V2_0: true
# Orderer capabilities apply only to the orderers, and may be safely
# used with prior release peers.
# Set the value of the capability to true to require it.
Orderer: &OrdererCapabilities
# V2_0 orderer capability ensures that orderers behave according
# to v2.0 orderer capabilities. Orderers from
# prior releases would behave in an incompatible way, and are therefore
# not able to participate in channels at v2.0 orderer capability.
# Prior to enabling V2.0 orderer capabilities, ensure that all
# orderers on channel are at v2.0.0 or later.
V2_0: true
# Application capabilities apply only to the peer network, and may be safely
# used with prior release orderers.
# Set the value of the capability to true to require it.
Application: &ApplicationCapabilities
# V2_0 application capability ensures that peers behave according
# to v2.0 application capabilities. Peers from
# prior releases would behave in an incompatible way, and are therefore
# not able to participate in channels at v2.0 application capability.
# Prior to enabling V2.0 application capabilities, ensure that all
# peers on channel are at v2.0.0 or later.
V2_0: true
################################################################################
#
# SECTION: Application
#
# - This section defines the values to encode into a config transaction or
# genesis block for application related parameters
#
################################################################################
Application: &ApplicationDefaults
# Organizations is the list of orgs which are defined as participants on
# the application side of the network
Organizations:
# Policies defines the set of policies at this level of the config tree
# For Application policies, their canonical path is
# /Channel/Application/<PolicyName>
Policies:
Readers:
Type: ImplicitMeta
Rule: "ANY Readers"
Writers:
Type: ImplicitMeta
Rule: "ANY Writers"
Admins:
Type: ImplicitMeta
Rule: "MAJORITY Admins"
LifecycleEndorsement:
Type: ImplicitMeta
Rule: "MAJORITY Endorsement"
Endorsement:
Type: ImplicitMeta
Rule: "MAJORITY Endorsement"
Capabilities:
<<: *ApplicationCapabilities
################################################################################
#
# SECTION: Orderer
#
# - This section defines the values to encode into a config transaction or
# genesis block for orderer related parameters
#
################################################################################
Orderer: &OrdererDefaults
# Orderer Type: The orderer implementation to start
OrdererType: etcdraft
# Batch Timeout: The amount of time to wait before creating a batch
BatchTimeout: 2s
# Batch Size: Controls the number of messages batched into a block
BatchSize:
# Max Message Count: The maximum number of messages to permit in a batch
MaxMessageCount: 10
# Absolute Max Bytes: The absolute maximum number of bytes allowed for
# the serialized messages in a batch.
AbsoluteMaxBytes: 99 MB
# Preferred Max Bytes: The preferred maximum number of bytes allowed for
# the serialized messages in a batch. A message larger than the preferred
# max bytes will result in a batch larger than preferred max bytes.
PreferredMaxBytes: 512 KB
# Organizations is the list of orgs which are defined as participants on
# the orderer side of the network
Organizations:
# Policies defines the set of policies at this level of the config tree
# For Orderer policies, their canonical path is
# /Channel/Orderer/<PolicyName>
Policies:
Readers:
Type: ImplicitMeta
Rule: "ANY Readers"
Writers:
Type: ImplicitMeta
Rule: "ANY Writers"
Admins:
Type: ImplicitMeta
Rule: "MAJORITY Admins"
# BlockValidation specifies what signatures must be included in the block
# from the orderer for the peer to validate it.
BlockValidation:
Type: ImplicitMeta
Rule: "ANY Writers"
################################################################################
#
# CHANNEL
#
# This section defines the values to encode into a config transaction or
# genesis block for channel related parameters.
#
################################################################################
Channel: &ChannelDefaults
# Policies defines the set of policies at this level of the config tree
# For Channel policies, their canonical path is
# /Channel/<PolicyName>
Policies:
# Who may invoke the 'Deliver' API
Readers:
Type: ImplicitMeta
Rule: "ANY Readers"
# Who may invoke the 'Broadcast' API
Writers:
Type: ImplicitMeta
Rule: "ANY Writers"
# By default, who may modify elements at this config level
Admins:
Type: ImplicitMeta
Rule: "MAJORITY Admins"
# Capabilities describes the channel level capabilities, see the
# dedicated Capabilities section elsewhere in this file for a full
# description
Capabilities:
<<: *ChannelCapabilities
################################################################################
#
# Profile
#
# - Different configuration profiles may be encoded here to be specified
# as parameters to the configtxgen tool
#
################################################################################
Profiles:
TwoOrgsChannel:
Consortium: SampleConsortium
<<: *ChannelDefaults
Application:
<<: *ApplicationDefaults
Organizations:
- *Org1
- *Org2
- *Org3
Capabilities:
<<: *ApplicationCapabilities
SampleMultiNodeEtcdRaft:
<<: *ChannelDefaults
Capabilities:
<<: *ChannelCapabilities
Orderer:
<<: *OrdererDefaults
OrdererType: etcdraft
EtcdRaft:
Consenters:
- Host: orderer.example.com
Port: 7050
ClientTLSCert: crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/tls/server.crt
ServerTLSCert: crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/tls/server.crt
- Host: orderer2.example.com
Port: 8050
ClientTLSCert: crypto-config/ordererOrganizations/example.com/orderers/orderer2.example.com/tls/server.crt
ServerTLSCert: crypto-config/ordererOrganizations/example.com/orderers/orderer2.example.com/tls/server.crt
- Host: orderer3.example.com
Port: 9050
ClientTLSCert: crypto-config/ordererOrganizations/example.com/orderers/orderer3.example.com/tls/server.crt
ServerTLSCert: crypto-config/ordererOrganizations/example.com/orderers/orderer3.example.com/tls/server.crt
- Host: orderer4.example.com
Port: 10050
ClientTLSCert: crypto-config/ordererOrganizations/example.com/orderers/orderer4.example.com/tls/server.crt
ServerTLSCert: crypto-config/ordererOrganizations/example.com/orderers/orderer4.example.com/tls/server.crt
- Host: orderer5.example.com
Port: 11050
ClientTLSCert: crypto-config/ordererOrganizations/example.com/orderers/orderer5.example.com/tls/server.crt
ServerTLSCert: crypto-config/ordererOrganizations/example.com/orderers/orderer5.example.com/tls/server.crt
Addresses:
- orderer.example.com:7050
- orderer2.example.com:8050
- orderer3.example.com:9050
- orderer4.example.com:10050
- orderer5.example.com:11050
Organizations:
- *OrdererOrg
Capabilities:
<<: *OrdererCapabilities
Application:
<<: *ApplicationDefaults
Organizations:
- <<: *OrdererOrg
Consortiums:
SampleConsortium:
Organizations:
- *Org1
- *Org2
- *Org3
3.接下来我们开始在我们的docker-compose-base.yaml文件中加入我们的配置，代码如下
# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#
version: '2'
services:
orderer.example.com:
container_name: orderer.example.com
extends:
file: peer-base.yaml
service: orderer-base
volumes:
- ../channel-artifacts/genesis.block:/var/hyperledger/orderer/orderer.genesis.block
- ../crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/msp:/var/hyperledger/orderer/msp
- ../crypto-config/ordererOrganizations/example.com/orderers/orderer.example.com/tls/:/var/hyperledger/orderer/tls
- orderer.example.com:/var/hyperledger/production/orderer
ports:
- 7050:7050
peer0.org1.example.com:
container_name: peer0.org1.example.com
extends:
file: peer-base.yaml
service: peer-base
environment:
- CORE_PEER_ID=peer0.org1.example.com
- CORE_PEER_ADDRESS=peer0.org1.example.com:7051
- CORE_PEER_LISTENADDRESS=0.0.0.0:7051
- CORE_PEER_CHAINCODEADDRESS=peer0.org1.example.com:7052
- CORE_PEER_CHAINCODELISTENADDRESS=0.0.0.0:7052
- CORE_PEER_GOSSIP_BOOTSTRAP=peer1.org1.example.com:8051
- CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer0.org1.example.com:7051
- CORE_PEER_LOCALMSPID=Org1MSP
volumes:
- /var/run/:/host/var/run/
- ../crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/msp:/etc/hyperledger/fabric/msp
- ../crypto-config/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls:/etc/hyperledger/fabric/tls
- peer0.org1.example.com:/var/hyperledger/production
ports:
- 7051:7051
peer1.org1.example.com:
container_name: peer1.org1.example.com
extends:
file: peer-base.yaml
service: peer-base
environment:
- CORE_PEER_ID=peer1.org1.example.com
- CORE_PEER_ADDRESS=peer1.org1.example.com:8051
- CORE_PEER_LISTENADDRESS=0.0.0.0:8051
- CORE_PEER_CHAINCODEADDRESS=peer1.org1.example.com:8052
- CORE_PEER_CHAINCODELISTENADDRESS=0.0.0.0:8052
- CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer1.org1.example.com:8051
- CORE_PEER_GOSSIP_BOOTSTRAP=peer0.org1.example.com:7051
- CORE_PEER_LOCALMSPID=Org1MSP
volumes:
- /var/run/:/host/var/run/
- ../crypto-config/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/msp:/etc/hyperledger/fabric/msp
- ../crypto-config/peerOrganizations/org1.example.com/peers/peer1.org1.example.com/tls:/etc/hyperledger/fabric/tls
- peer1.org1.example.com:/var/hyperledger/production
ports:
- 8051:8051
peer0.org2.example.com:
container_name: peer0.org2.example.com
extends:
file: peer-base.yaml
service: peer-base
environment:
- CORE_PEER_ID=peer0.org2.example.com
- CORE_PEER_ADDRESS=peer0.org2.example.com:9051
- CORE_PEER_LISTENADDRESS=0.0.0.0:9051
- CORE_PEER_CHAINCODEADDRESS=peer0.org2.example.com:9052
- CORE_PEER_CHAINCODELISTENADDRESS=0.0.0.0:9052
- CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer0.org2.example.com:9051
- CORE_PEER_GOSSIP_BOOTSTRAP=peer1.org2.example.com:10051
- CORE_PEER_LOCALMSPID=Org2MSP
volumes:
- /var/run/:/host/var/run/
- ../crypto-config/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/msp:/etc/hyperledger/fabric/msp
- ../crypto-config/peerOrganizations/org2.example.com/peers/peer0.org2.example.com/tls:/etc/hyperledger/fabric/tls
- peer0.org2.example.com:/var/hyperledger/production
ports:
- 9051:9051
peer1.org2.example.com:
container_name: peer1.org2.example.com
extends:
file: peer-base.yaml
service: peer-base
environment:
- CORE_PEER_ID=peer1.org2.example.com
- CORE_PEER_ADDRESS=peer1.org2.example.com:10051
- CORE_PEER_LISTENADDRESS=0.0.0.0:10051
- CORE_PEER_CHAINCODEADDRESS=peer1.org2.example.com:10052
- CORE_PEER_CHAINCODELISTENADDRESS=0.0.0.0:10052
- CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer1.org2.example.com:10051
- CORE_PEER_GOSSIP_BOOTSTRAP=peer0.org2.example.com:9051
- CORE_PEER_LOCALMSPID=Org2MSP
volumes:
- /var/run/:/host/var/run/
- ../crypto-config/peerOrganizations/org2.example.com/peers/peer1.org2.example.com/msp:/etc/hyperledger/fabric/msp
- ../crypto-config/peerOrganizations/org2.example.com/peers/peer1.org2.example.com/tls:/etc/hyperledger/fabric/tls
- peer1.org2.example.com:/var/hyperledger/production
ports:
- 10051:10051
# 以下为组织3（org3）的配置
peer0.org3.example.com:
container_name: peer0.org3.example.com
extends:
file: peer-base.yaml
service: peer-base
environment:
- CORE_PEER_ID=peer0.org3.example.com
- CORE_PEER_ADDRESS=peer0.org3.example.com:11051
- CORE_PEER_LISTENADDRESS=0.0.0.0:11051
- CORE_PEER_CHAINCODEADDRESS=peer0.org3.example.com:11052
- CORE_PEER_CHAINCODELISTENADDRESS=0.0.0.0:11052
- CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer0.org3.example.com:11051
- CORE_PEER_GOSSIP_BOOTSTRAP=peer1.org3.example.com:12051
- CORE_PEER_LOCALMSPID=Org3MSP
volumes:
- /var/run/:/host/var/run/
- ../crypto-config/peerOrganizations/org3.example.com/peers/peer0.org3.example.com/msp:/etc/hyperledger/fabric/msp
- ../crypto-config/peerOrganizations/org3.example.com/peers/peer0.org3.example.com/tls:/etc/hyperledger/fabric/tls
- peer0.org3.example.com:/var/hyperledger/production
ports:
- 11051:11051
peer1.org3.example.com:
container_name: peer1.org3.example.com
extends:
file: peer-base.yaml
service: peer-base
environment:
- CORE_PEER_ID=peer1.org3.example.com
- CORE_PEER_ADDRESS=peer1.org3.example.com:12051
- CORE_PEER_LISTENADDRESS=0.0.0.0:12051
- CORE_PEER_CHAINCODEADDRESS=peer1.org3.example.com:12052
- CORE_PEER_CHAINCODELISTENADDRESS=0.0.0.0:12052
- CORE_PEER_GOSSIP_EXTERNALENDPOINT=peer1.org3.example.com:12051
- CORE_PEER_GOSSIP_BOOTSTRAP=peer0.org3.example.com:11051
- CORE_PEER_LOCALMSPID=Org3MSP
volumes:
- /var/run/:/host/var/run/
- ../crypto-config/peerOrganizations/org3.example.com/peers/peer1.org3.example.com/msp:/etc/hyperledger/fabric/msp
- ../crypto-config/peerOrganizations/org3.example.com/peers/peer1.org3.example.com/tls:/etc/hyperledger/fabric/tls
- peer1.org3.example.com:/var/hyperledger/production
ports:
- 12051:12051
4.然后我们在docker-compose-cli.yaml文件中添加配置 代码如下
# Copyright IBM Corp. All Rights Reserved.
#
# SPDX-License-Identifier: Apache-2.0
#
version: '2'
volumes:
orderer.example.com:
peer0.org1.example.com:
peer1.org1.example.com:
peer0.org2.example.com:
peer1.org2.example.com:
peer0.org3.example.com:
peer1.org3.example.com:
networks:
byfn:
services:
orderer.example.com:
extends:
file: base/docker-compose-base.yaml
service: orderer.example.com
container_name: orderer.example.com
networks:
- byfn
peer0.org1.example.com:
container_name: peer0.org1.example.com
extends:
file: base/docker-compose-base.yaml
service: peer0.org1.example.com
networks:
- byfn
peer1.org1.example.com:
container_name: peer1.org1.example.com
extends:
file: base/docker-compose-base.yaml
service: peer1.org1.example.com
networks:
- byfn
peer0.org2.example.com:
container_name: peer0.org2.example.com
extends:
file: base/docker-compose-base.yaml
service: peer0.org2.example.com
networks:
- byfn
peer1.org2.example.com:
container_name: peer1.org2.example.com
extends:
file: base/docker-compose-base.yaml
service: peer1.org2.example.com
networks:
- byfn
peer0.org3.example.com:
container_name: peer0.org3.example.com
extends:
file: base/docker-compose-base.yaml
service: peer0.org3.example.com
networks:
- byfn
peer1.org3.example.com:
container_name: peer1.org3.example.com
extends:
file: base/docker-compose-base.yaml
service: peer1.org3.example.com
networks:
- byfn
cli:
container_name: cli
image: hyperledger/fabric-tools:$IMAGE_TAG
tty: true
stdin_open: true
environment:
- GOPATH=/opt/gopath
- CORE_VM_ENDPOINT=unix:///host/var/run/docker.sock
#- FABRIC_LOGGING_SPEC=DEBUG
- FABRIC_LOGGING_SPEC=INFO
- CORE_PEER_ID=cli
- CORE_PEER_ADDRESS=peer0.org1.example.com:7051
- CORE_PEER_LOCALMSPID=Org1MSP
- CORE_PEER_TLS_ENABLED=true
- CORE_PEER_TLS_CERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/server.crt
- CORE_PEER_TLS_KEY_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/server.key
- CORE_PEER_TLS_ROOTCERT_FILE=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/peers/peer0.org1.example.com/tls/ca.crt
- CORE_PEER_MSPCONFIGPATH=/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/peerOrganizations/org1.example.com/users/Admin@org1.example.com/msp
working_dir: /opt/gopath/src/github.com/hyperledger/fabric/peer
command: /bin/bash
volumes:
- /var/run/:/host/var/run/
- ./../chaincode/:/opt/gopath/src/github.com/hyperledger/fabric-samples/chaincode
- ./crypto-config:/opt/gopath/src/github.com/hyperledger/fabric/peer/crypto/
- ./scripts:/opt/gopath/src/github.com/hyperledger/fabric/peer/scripts/
- ./channel-artifacts:/opt/gopath/src/github.com/hyperledger/fabric/peer/channel-artifacts
depends_on:
- orderer.example.com
- peer0.org1.example.com
- peer1.org1.example.com
- peer0.org2.example.com
- peer1.org2.example.com
- peer0.org3.example.com
- peer1.org3.example.com
networks:
- byfn
5.下面我们开始修改脚本文件，首先修改byfn.sh中的generateChannelArtifacts，我们需要生成org3的Org3MSPanchors.tx文件，
我们在generateChannelArtifacts方法中加入生成Org3MSPanchors.tx文件的代码
function generateChannelArtifacts() {
which configtxgen
if [ "$?" -ne 0 ]; then
echo "configtxgen tool not found. exiting"
exit 1
fi
echo "##########################################################"
echo "######### Generating Orderer Genesis block ##############"
echo "##########################################################"
# Note: For some unknown reason (at least for now) the block file can't be
# named orderer.genesis.block or the orderer will fail to launch!
set -x
configtxgen -profile SampleMultiNodeEtcdRaft -channelID byfn-sys-channel -outputBlock ./channel-artifacts/genesis.block
res=$?
set +x
if [ $res -ne 0 ]; then
echo "Failed to generate orderer genesis block..."
exit 1
fi
echo
echo "#################################################################"
echo "### Generating channel configuration transaction 'channel.tx' ###"
echo "#################################################################"
set -x
configtxgen -profile TwoOrgsChannel -outputCreateChannelTx ./channel-artifacts/channel.tx -channelID $CHANNEL_NAME
res=$?
set +x
if [ $res -ne 0 ]; then
echo "Failed to generate channel configuration transaction..."
exit 1
fi
echo
echo "#################################################################"
echo "####### Generating anchor peer update for Org1MSP ##########"
echo "#################################################################"
set -x
configtxgen -profile TwoOrgsChannel -outputAnchorPeersUpdate ./channel-artifacts/Org1MSPanchors.tx -channelID $CHANNEL_NAME -asOrg Org1MSP
res=$?
set +x
if [ $res -ne 0 ]; then
echo "Failed to generate anchor peer update for Org1MSP..."
exit 1
fi
echo
echo "#################################################################"
echo "####### Generating anchor peer update for Org2MSP ##########"
echo "#################################################################"
set -x
configtxgen -profile TwoOrgsChannel -outputAnchorPeersUpdate \
./channel-artifacts/Org2MSPanchors.tx -channelID $CHANNEL_NAME -asOrg Org2MSP
res=$?
set +x
if [ $res -ne 0 ]; then
echo "Failed to generate anchor peer update for Org2MSP..."
exit 1
fi
echo
#生成org3的Org3MSPanchors.tx文件
echo
echo "#################################################################"
echo "####### Generating anchor peer update for Org3MSP ##########"
echo "#################################################################"
set -x
configtxgen -profile TwoOrgsChannel -outputAnchorPeersUpdate \
./channel-artifacts/Org3MSPanchors.tx -channelID $CHANNEL_NAME -asOrg Org3MSP
res=$?
set +x
if [ $res -ne 0 ]; then
echo "Failed to generate anchor peer update for Org3MSP..."
exit 1
fi
echo
}
6.我们打开script脚本，首先修改joinChannel方法，让org3也加入通道中
joinChannel () {
for org in 1 2 3; do
for peer in 0 1; do
joinChannelWithRetry $peer $org
echo "===================== peer${peer}.org${org} joined channel '$CHANNEL_NAME' ===================== "
sleep $DELAY
echo
done
done
}
7.在script脚本中加入如下代码安装我们的org3的链码并使用
if [ "${NO_CHAINCODE}" != "true" ]; then
## at first we package the chaincode
packageChaincode 1 0 1
## Install chaincode on peer0.org1 and peer0.org2
echo "Installing chaincode on peer0.org1..."
installChaincode 0 1
echo "Install chaincode on peer0.org2..."
installChaincode 0 2
echo "Install chaincode on peer0.org3..."
installChaincode 0 3
## query whether the chaincode is installed
queryInstalled 0 1
## approve the definition for org1
approveForMyOrg 1 0 1
## check whether the chaincode definition is ready to be committed
## expect org1 to have approved and org2 not to
checkCommitReadiness 1 0 1 "\"Org1MSP\": true" "\"Org2MSP\": false" "\"Org3MSP\": false"
checkCommitReadiness 1 0 2 "\"Org1MSP\": true" "\"Org2MSP\": false" "\"Org3MSP\": false"
checkCommitReadiness 1 0 3 "\"Org1MSP\": true" "\"Org2MSP\": false" "\"Org3MSP\": false"
## now approve also for org2
approveForMyOrg 1 0 2
## check whether the chaincode definition is ready to be committed
## expect them both to have approved
checkCommitReadiness 1 0 1 "\"Org1MSP\": true" "\"Org2MSP\": true" "\"Org3MSP\": false"
checkCommitReadiness 1 0 2 "\"Org1MSP\": true" "\"Org2MSP\": true" "\"Org3MSP\": false"
checkCommitReadiness 1 0 3 "\"Org1MSP\": true" "\"Org2MSP\": true" "\"Org3MSP\": false"
## now approve also for org3
approveForMyOrg 1 0 3
checkCommitReadiness 1 0 1 "\"Org1MSP\": true" "\"Org2MSP\": true" "\"Org3MSP\": true"
checkCommitReadiness 1 0 2 "\"Org1MSP\": true" "\"Org2MSP\": true" "\"Org3MSP\": true"
checkCommitReadiness 1 0 3 "\"Org1MSP\": true" "\"Org2MSP\": true" "\"Org3MSP\": true"
## now that we know for sure both orgs have approved, commit the definition
commitChaincodeDefinition 1 0 1 0 2 0 3
## query on both orgs to see that the definition committed successfully
queryCommitted 1 0 1
queryCommitted 1 0 2
queryCommitted 1 0 3
# invoke init
chaincodeInvoke 1 0 1 0 2 0 3
# Query chaincode on peer0.org1
echo "Querying chaincode on peer0.org1..."
chaincodeQuery 0 1 100
# Invoke chaincode on peer0.org1 and peer0.org2
echo "Sending invoke transaction on peer0.org1 peer0.org2..."
chaincodeInvoke 0 0 1 0 2 0 3
# Query chaincode on peer0.org1
echo "Querying chaincode on peer0.org1..."
chaincodeQuery 0 1 90
## Install chaincode on peer1.org2
echo "Installing chaincode on peer1.org2..."
installChaincode 1 2
# Query on chaincode on peer1.org2, check if the result is 90
echo "Querying chaincode on peer1.org2..."
chaincodeQuery 1 2 90
fi
执行脚本，./bysh up 我们可以看到org3加入通道
org3安装chaincode
开始invoke
程序执行完毕
至此我们在fabric-samples重的first-network示例中成功加入了第三个组织
标签：peer0,fabric2.0,CORE,详解,PEER,org3,org1,com,example 来源： https://blog.csdn.net/tank_ft/article/details/105543011