首页 > 其他分享> > Percona XtraDB Cluster with HA-Proxy

Percona XtraDB Cluster with HA-Proxy

2019-07-21 15:39:04 作者：互联网

原文链接：http://www.cnblogs.com/jeffreyf/p/percona-xtradb-cluster-with-haproxy.html

This article will show how to build a sample HA environment with Percona XtraDB Cluster and HA-Proxy. This sample environment consists of a cluster running on 3 Ubuntu 14.04 nodes with Percona XtraDB Cluster 5.6 installed, and a load balancer running on a seperate Ubuntu 14.04 node with HA-Proxy installed. Below are the names, IP addresses and roles for each node in this sample environment.

pxc0 192.168.122.200 Load Balancer node
pxc1 192.168.122.201 Cluster node
pxc2 192.168.122.202 Cluster node
pxc3 192.168.122.203 Cluster node

This sample environment is verified-and-works with the software versions listed below.

Ubuntu 14.04 # all 4 nodes
Percona XtraDB Cluster 5.6 # all 3 cluster nodes (pxc1 ~ 3)
HA-Proxy 1.4.24 # LB node (pxc0)
Sysbench 0.4.12 # LB node (pxc0)

Install and configure PXC

Install PXC on all cluster nodes(pxc1, pxc2, pxc3)

sudo apt-key adv --keyserver keys.gnupg.net --recv-keys 1C4CBDCDCD2EFD2A
sudo vi /etc/apt/sources.list.d/percona.list

Add the following 2 lines to the percona.list file.

deb http://repo.percona.com/apt trusty main
deb-src http://repo.percona.com/apt trusty main

Update repo and install PXC.

sudo apt-get update
sudo apt-get install percona-xtradb-cluster-56

Stop mysql first before configure the cluster.

sudo service mysql stop

Open /etc/mysql/my.cnf, find the line 'bind-address = 127.0.0.1' and comment it out with a '#'.

Configure pxc1

Open mysql configuration file.

sudo vi /etc/mysql/my.cnf

And then add the following lines under the section [mysqld].

# 
# * Cluster Settings 
# 

# Path to Galera library
wsrep_provider=/usr/lib/libgalera_smm.so 
# Cluster connection URL contains the IPs of node#1, node#2 and node#3 
wsrep_cluster_address=gcomm://192.168.122.201,192.168.122.202,192.168.122.203 
# In order for Galera to work correctly binlog format should be ROW 
binlog_format=ROW 
# MyISAM storage engine has only experimental support 
default_storage_engine=InnoDB 
# This changes how InnoDB autoincrement locks are managed and is a requirement for Galera 
innodb_autoinc_lock_mode=2 
# Node #1 address 
wsrep_node_address=192.168.122.201 
# SST method 
wsrep_sst_method=xtrabackup-v2 
# Cluster name 
wsrep_cluster_name=pxc_ubuntu_1 
# Authentication for SST method 
wsrep_sst_auth="sstuser:s3cretPass"

Start the first node with the command below.

sudo service mysql bootstrap-pxc

Open mysql client.

mysql -u root -p

Execute the following queries to create a user for State Snapshot Transfer using Percona XtraBackup

CREATE USER 'sstuser'@'localhost' IDENTIFIED BY 's3cretPass'; 
GRANT RELOAD, LOCK TABLES, REPLICATION CLIENT ON *.* TO 'sstuser'@'localhost'; 
FLUSH PRIVILEGES;

Verify pxc1

Execute the following query on mysql client.

SHOW STATUS LIKE 'wsrep%';

The output should look like below.

wsrep_local_state_uuid      = xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx 
... 
wsrep_local_state           = 4 
wsrep_local_state_comment   = Synced 
... 
wsrep_cluster_size          = 1 
wsrep_cluster_status        = Primary 
wsrep_connected             = ON 
... 
wsrep_ready                 = ON

Configure pxc2

Open mysql configuration file.

sudo vi /etc/mysql/my.cnf

Add the following lines under the section [mysqld].

# 
# * Cluster Settings 
# 

# Path to Galera library
wsrep_provider=/usr/lib/libgalera_smm.so 
# Cluster connection URL contains the IPs of node#1, node#2 and node#3 
wsrep_cluster_address=gcomm://192.168.122.201,192.168.122.202,192.168.122.203 
# In order for Galera to work correctly binlog format should be ROW 
binlog_format=ROW 
# MyISAM storage engine has only experimental support 
default_storage_engine=InnoDB 
# This changes how InnoDB autoincrement locks are managed and is a requirement for Galera 
innodb_autoinc_lock_mode=2 
# Node #1 address 
wsrep_node_address=192.168.122.202 
# SST method 
wsrep_sst_method=xtrabackup-v2 
# Cluster name 
wsrep_cluster_name=pxc_ubuntu_1 
# Authentication for SST method 
wsrep_sst_auth="sstuser:s3cretPass"

Start mysql.

sudo service mysql start

Verify pxc2

Execute the following query on mysql client.

SHOW STATUS LIKE 'wsrep%';

The output should look like below.

wsrep_local_state_uuid      = xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx 
... 
wsrep_local_state           = 4 
wsrep_local_state_comment   = Synced 
... 
wsrep_cluster_size          = 2 
wsrep_cluster_status        = Primary 
wsrep_connected             = ON 
... 
wsrep_ready                 = ON

Configure pxc3

Open mysql configuration file.

sudo vi /etc/mysql/my.cnf

Add the following lines under the section [mysqld].

# 
# * Cluster Settings 
# 

# Path to Galera library
wsrep_provider=/usr/lib/libgalera_smm.so 
# Cluster connection URL contains the IPs of node#1, node#2 and node#3 
wsrep_cluster_address=gcomm://192.168.122.201,192.168.122.202,192.168.122.203 
# In order for Galera to work correctly binlog format should be ROW 
binlog_format=ROW 
# MyISAM storage engine has only experimental support 
default_storage_engine=InnoDB 
# This changes how InnoDB autoincrement locks are managed and is a requirement for Galera 
innodb_autoinc_lock_mode=2 
# Node #1 address 
wsrep_node_address=192.168.122.203 
# SST method 
wsrep_sst_method=xtrabackup-v2 
# Cluster name 
wsrep_cluster_name=pxc_ubuntu_1 
# Authentication for SST method 
wsrep_sst_auth="sstuser:s3cretPass"

Start mysql.

sudo service mysql start

Verify pxc3

Execute the following query on mysql client.

SHOW STATUS LIKE 'wsrep%';

The output should look like below.

wsrep_local_state_uuid      = xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx 
... 
wsrep_local_state           = 4 
wsrep_local_state_comment   = Synced 
... 
wsrep_cluster_size          = 3 
wsrep_cluster_status        = Primary 
wsrep_connected             = ON 
... 
wsrep_ready                 = ON

Verify replication in the whole cluster

On pxc3,

CREATE DATABASE testrep;

On pxc2,

USE testrep; 
CREATE TABLE t1 (id INT PRIMARY KEY, name NVARCHAR(50));

On pxc1,

INSERT INTO testrep.t1 VALUES (1, 'name #1');

On pxc3,

SELECT * FROM testrep.t1;

Install and configure HA-Proxy

On any cluster node, execute mysql queries to create a user for cluster check.

GRANT PROCESS ON *.* TO 'clustercheckuser'@'localhost' IDENTIFIED BY 'clustercheckuserpass'; 
FLUSH PRIVILEGES;

On all cluster nodes(pxc1, pxc2, pxc3), run the following commands.

Open the clustercheck script.

sudo vi /usr/bin/clustercheck

Find the following 2 lines,

MYSQL_USERNAME="${1-clustercheckuser}"
MYSQL_PASSWORD="${2-clustercheckpassword!}"

and then replace them with below.

MYSQL_USERNAME="clustercheckuser"
MYSQL_PASSWORD="clustercheckuserpass"

Install xinetd.

sudo apt-get install xinetd

Open the file /etc/services,

sudo vi /etc/services

Append the following lines to the end of /etc/services.

mysqlchk                9200/tcp                # mysqlchk

Restart xinetd.

sudo service xinetd restart

On the load balancer node (pxc0), runt the following commands to install haproxy.

sudo apt-get update 
sudo apt-get install haproxy

Configure /etc/haproxy/haproxy.cfg with the content below.

global
        log /dev/log    local0
        log /dev/log    local1 notice
        chroot /var/lib/haproxy
        user haproxy
        group haproxy
        daemon

defaults
        log     global
        mode    http
        option  tcplog
        option  dontlognull
        contimeout 5000
        clitimeout 50000
        srvtimeout 50000
        errorfile 400 /etc/haproxy/errors/400.http
        errorfile 403 /etc/haproxy/errors/403.http
        errorfile 408 /etc/haproxy/errors/408.http
        errorfile 500 /etc/haproxy/errors/500.http
        errorfile 502 /etc/haproxy/errors/502.http
        errorfile 503 /etc/haproxy/errors/503.http
        errorfile 504 /etc/haproxy/errors/504.http

frontend pxc-front
        bind *:3307
        mode tcp
        default_backend pxc-back

frontend stats-front
        bind *:80
        mode http
        default_backend stats-back

frontend pxc-onenode-front
        bind *:3306
        mode tcp
        default_backend pxc-onenode-back

backend pxc-back
        mode tcp
        balance leastconn
        option httpchk
        server pxc1 192.168.122.201:3306 check port 9200 inter 12000 rise 3 fall 3
        server pxc2 192.168.122.202:3306 check port 9200 inter 12000 rise 3 fall 3
        server pxc3 192.168.122.203:3306 check port 9200 inter 12000 rise 3 fall 3

backend stats-back
        mode http
        balance roundrobin
        stats uri /haproxy/stats
        stats auth pxcstats:secret

backend pxc-onenode-back
        mode tcp
        balance leastconn
        option httpchk
        server pxc1 192.168.122.201:3306 check port 9200 inter 12000 rise 3 fall 3
        server pxc2 192.168.122.202:3306 check port 9200 inter 12000 rise 3 fall 3 backup
        server pxc3 192.168.122.203:3306 check port 9200 inter 12000 rise 3 fall 3 backup

Start haproxy.

sudo haproxy -f /etc/haproxy/haproxy.cfg

Verify if haproxy works. On a machine that has a browser installed and can access to pxc0/192.168.122.200, open the browser and type 'http://192.168.122.200/haproxy/stats' in the address bar. You'll see the response content containing tables.

Test with sysbench

On any cluster node, execute mysql queries to create the database 'sbtest' and a user for sysbench.

CREATE DATABASE sbtest; 
GRANT ALL ON sbtest.* TO 'sbtestuser'@'%' IDENTIFIED BY 'sbtestuserpass'; 
FLUSH PRIVILEGES;

On the load balancer node, run the following command to install sysbench.

sudo apt-get install sysbench

Now we can run sysbench test now. Please note, if the sysbench version on your machine is 0.5, replace '--test=oltp' with '--test=/usr/share/doc/sysbench/tests/db/oltp.lua'.

sysbench --test=oltp --db-driver=mysql --mysql-engine-trx=yes --mysql-table-engine=innodb --mysql-host=127.0.0.1 --mysql-port=3307 --mysql-user=sbtestuser --mysql-password=sbtestuserpass --oltp-table-size=10000 prepare

sysbench --test=oltp --db-driver=mysql --mysql-engine-trx=yes --mysql-table-engine=innodb --mysql-host=127.0.0.1 --mysql-port=3307 --mysql-user=sbtestuser --mysql-password=sbtestuserpass --oltp-table-size=10000 --num-threads=8 run

After threads started, refresh 'http://192.168.122.200/haproxy/stats' in your browser, you'll see the changes in the tables.

转载于:https://www.cnblogs.com/jeffreyf/p/percona-xtradb-cluster-with-haproxy.html

标签：node,haproxy,cluster,wsrep,192.168,Cluster,Percona,XtraDB,mysql
来源： https://blog.csdn.net/weixin_30699741/article/details/96725897