其他分享
首页 > 其他分享> > Creating a Dialog-based App(转载)

Creating a Dialog-based App(转载)

作者:互联网

flounder.gif

Creating a Dialog-based App

flounder.gif Home
bulb.gif Back To Tips Page

This is one of several essays dealing with dialogs. Another one discusses the issues of control management, and one discusses issues of menu management, printing from a dialog, and resizable dialogs.

This essay covers

Avoiding Enter/Escape termination

There are a large number of recurring questions on creating dialog-based apps. This is my method of creating dialog-based apps, and in addition, illustrates how to handle the Enter key in an edit control.

The most common problems people ask about are "How do I trap the ESC key so it doesn't terminate my application?" and "How do I trap the Enter key so it doesn't terminate my application?". These are easy.

First, I do not believe in handling this in PreTranslateMessage. The result of this is distributed knowledge which makes it difficult to maintain the code, particularly when controls are added or deleted. My technique uses subclassing to put the intelligence where it belongs, in the control, and puts the handlers in a known and easily understood place, a message handler.

First, create your dialog-based application. You will end up with something that resembles the dialog below (which I've shrunk so it doesn't take up too much space on the page):

dialogapp.gif

Enter the ClassWizard. Select IDOK and its BN_CLICKED handler, and click Add Function. Accept the name it gives. Do the same for IDCANCEL. You should end up with something that looks like the illustration shown below. I show the IDCANCEL handler clicked, since that is the last one I added (note that two lines below, the ON_IDOK::BN_CLICKED handler is already present).

dialogapp2.gif

Next, select the dialog class, and find the WM_CLOSE message handler. Click Add Function. You should now have something like I show below.

dialogapp3.gif

Go to your source code and examine it. You can either exit ClassWizard via the OK button, or click the Edit Code button. Your code should look like this:

void CDialogappDlg::OnOK() 
{
// TODO: Add extra validation here

CDialog::OnOK();
}

void CDialogappDlg::OnCancel()
{
// TODO: Add extra cleanup here

CDialog::OnCancel();
}

void CDialogappDlg::OnClose()
{
// TODO: Add your message handler code here and/or call default

CDialog::OnClose();
}

Change it to be as shown below. Delete the bodies of OnOK and OnCancel. Put the CDialog::OnOK call in the OnClose handler.

void CDialogappDlg::OnOK() 
{
}

void CDialogappDlg::OnCancel()
{
}

void CDialogappDlg::OnClose()
{

}

Go back to the dialog. Delete the OK and Cancel buttons. Add in your controls. For example, I want to add an edit control that reacts only when you either leave it or hit Enter, and prior to that it can be changed without any effect. The other control reacts immediately.

Creating reactive controls

To create an edit control that reacts immediately, put in an EN_CHANGE handler

dialogapp4.gif

Also, create a member variable for the control; I describe how to do this in a companion essay. 

In order to access the status control which will show the effect, you must assign it an ID other than IDC_STATIC. Create a control variable to represent it.

dialogapp5.gif

I end up with variables as shown below (note that I have not yet created a variable for IDC_DELAYED)

dialogapp6.gif

The code for immediate response is simple:

void CDialogappDlg::OnChangeImmediate() 
{
CString s;
c_Immediate.GetWindowText(s);
c_Status.SetWindowText(s);
}

When running, it produces output such as

dialogapp7.gif

As each character is typed in the "Immediate Reaction" edit control, it appears in the box labelled "I see". 

However, I might not want a reaction to take place until I hit Enter, or leave focus, or both. To do this, I create a subclass of CEdit:

dialogapp8.gif

Create a class derived from CEdit, which I have called CEnterEdit.

dialogapp9.gif

Now create a member variable for IDC_DELAYED of that type:

dialogapp10.gif

Which should leave you with the following definitions

dialogapp11.gif

Notifying the Parent

In ClassWizard select the new class you defined. (Note that if you are continuing from the previous step you will be prompted to save your changes; select "Yes").

Add handlers for =EN_KILLFOCUS, WM_CHAR, and WM_GETDLGCODE:

dialogapp12.gif

You must remember to add the header file for your new class to your compilations before any file that uses it. For a dialog-based app, this means the app source and the dialog source must both have it, for example

Otherwise, you will get compilation errors whenever your ...Dlg.h file is processed.

If you use a custom message, you must define it. I prefer to use Registered Window Messages, as outlined in my companion essay, so I added to EnterEdit.h the following declaration. Note that it is critical that when you add a user-defined message, you document its parameters, effect, and return result! Doing anything less will lead to unintelligible and unmaintainable code.

/****************************************************************************
* UWM_EDIT_COMPLETE
* Inputs:
* WPARAM: Control ID of the control whose edit completed
* LPARAM: CWnd * of the control whose edit completed
* Result: LRESULT
* Logically void, 0, always
* Effect:
* Posted/Sent to the parent of this control to indicate that the
* edit has completed, either by the user typing <Enter> or focus leaving
****************************************************************************/

#define UWM_EDIT_COMPLETE_MSG _T("UWM_EDIT_COMPLETE-{165BBEA0-C1A8-11d5-A04D-006067718D04}")

I declare it in EnterEdit.cpp as shown below, or you could use the more convenient DECLARE_MESSAGE macro I define in my companion essay.

static UINT UWM_EDIT_COMPLETE = ::RegisterWindowMessage(UWM_EDIT_COMPLETE_MSG);

This allows me to write the handlers I need.

First, in order to bypass the tendency of the dialog superclass to intercept and handle keyboard input, you should make the indicated change in the OnGetDlgCode handler:

UINT CEnterEdit::OnGetDlgCode() 
{
return CEdit::OnGetDlgCode() ;
}

This tells the dialog superclass that when focus is in this control it should deliver to it all the keys pressed.

Then, in your OnChar handler, you can do

void CEnterEdit::OnChar(UINT nChar, UINT nRepCnt, UINT nFlags) 
{

CEdit::OnChar(nChar, nRepCnt, nFlags);
}

Why a switch with only one case? Why not? It makes it easy to add other cases, and captures the fact that you are concerned at the moment with some finite set of characters. I prefer switch statements in such contexts. They eliminate the temptation to add complex if-then-else structures, resulting in cleaner and easier-to-maintain code.

When an Enter key is seen, the message is sent to the parent which can then react to it.

To handle processing when focus is lost, modify the reflected =EN_KILLFOCUS handler as shown below

void CEnterEdit::OnKillfocus() 
{
}

Now you need to add a handler to the parent. This means you must declare a UINT for the Registered Window Message just like you did in the child edit control, and add the indicated message to the MESSAGE_MAP:

BEGIN_MESSAGE_MAP(CDialogappDlg, CDialog)
//{{AFX_MSG_MAP(CDialogappDlg)
ON_WM_SYSCOMMAND()
ON_WM_PAINT()
ON_WM_QUERYDRAGICON()
ON_WM_CLOSE()
ON_EN_CHANGE(IDC_IMMEDIATE, OnChangeImmediate)
//}}AFX_MSG_MAP
END_MESSAGE_MAP()

IMPORTANT: This should be outside (above or below; I show above) the magic AFX_MSG_MAP comments! Otherwise you can confuse the ClassWizard.

You must add a handler to the declarations in your header file: 

      

IMPORTANT: This must be outside (above or below, I show above) the magic AFX_MSG comments. Otherwise you can confuse the ClassWizard.

The handler could look like the one I show here:

LRESULT CDialogappDlg::OnEditComplete(WPARAM, LPARAM lParam)
{
CEnterEdit * edit = (CEnterEdit *)lParam;
CString s;
edit->GetWindowText(s);
c_Status.SetWindowText(s);
return 0;
} // CDialogappDlg::OnEditComplete

In this simple example, I don't care which window generated the message, so I ignore WPARAM, and whatever control was activated, I simply set its text into the status window. In a dialog with many controls, you would probably want to switch on the WPARAM value.

Now when I run the app, and type text into the "Delayed Reaction" box, I see the following. Note that the contents of the "I see" status box is whatever was left from the previous typing.

dialogapp13.gif

but if I hit Enter or change focus, I will get the following result. The new text is in the "I See" box, and the focus (as shown by the caret) is still in the Delayed Reaction" box.

dialogapp14.gif

Or, if I switch focus, I will also see the effect. Note that by doing this on a kill focus, I will also see the text activate if I switch to another application. If this is not desired, don't use the =EN_KILLFOCUS reflector, or you must do a more complex test. Note that starting from the first picture, I get the result shown below when I change focus to the upper window.

dialogapp15.gif

Many people have commented on this technique, "You are creating another subclass. Why do you feel you need to do this?" Never be afraid to create a custom subclass. I have been known to create a dozen in one day. It is a natural paradigm for MFC programming. These are the techniques I use to build real software that is used by thousands of people and maintained by someone other than myself.

download.gif (1234 bytes)Download the code sample I used to create all those windows.

 


A Tray-Based Dialog App

Sometimes you want your app to come up as a tray icon app, with no actual visibility when it starts up. There are two issues involved here: preventing the initial "flash", and creating the tray icon and its associated menu.

Preventing the "flash" 

When a dialog-based application comes up, the dialog manager normally forces it to be visible. The usual solution I used was to put up with this, and do a PostMessage of a user-defined message in OnInitDialog which, when finally processed, would hide the application. This meant the dialog would initially "flash" on the screen. This is visually disturbing.

Preventing the flash was shown in a very clever method found in a nice article

http://www.codeproject.com/dialog/dlgboxtricks.asp

which has several other dialog box tricks. I suggest you go look at it as well. I was given permission by the author to include this in my essay, but there are lots of other useful techniques there as well. These include

All of these are useful techniques, and I highly recommend this article.

The trick (one I would probably have never discovered on my own) is to use the WM_WINDOWPOSCHANGING message. 

First, add a BOOL variable to your dialog class, and initialize it as FALSE:

class CWhateverDialog {
... usual stuff here
protected:

...probably lots of other stuff here
};

To the .cpp file, add the initialization in the constructor:

CWhateverDialog::CWhateverDialog()
{
// ... usual initialization of constructor here
}

Then add a handler for WM_WINDOWPOSCHANGING:

void CWhateverDialog::OnWindowPosChanging(WINDOWPOS * pos)
{
    CDialog::OnWindowPosChanging(pos); 
}

To actually make the window available, you need to do

visible = TRUE;
ShowWindow(SW_SHOW);

Creating the Tray Icon

Create an icon of your choice for the tray icon. You should create a 16×16 version of the icon. You will also need to create a user-defined message code; I strongly recommend using a Registered Window Message, as I describe in my accompanying essay. You must add the prototypes for the following functions to the class definition of your class, in the .h file:

BOOL registerTray();
void unregisterTray();

You then add code to the .cpp file:

#define TRAY_ICON_ID 1 // see below

BOOL CWhateverDialog::registerTray()
{
NOTIFYICONDATA tray;
// IDI_TRAY is the image of the tray icon
HICON icon = AfxGetApp()->LoadIcon(IDI_TRAY);
CString tip;

// This is the string that is displayed to describe
// the application when the mouse hovers over the
// tray icon
tip.LoadString(IDS_TRAY_TIP);

// initialize the NOTIFYICONDATA structure
tray.cbSize = sizeof(tray);

// Indicate that the notification messages should come to
// this window
tray.hWnd = m_hWnd;

// This ID is an integer you assign so you can distinguish,
// on a callback, which of several icons may have been involved
// in the notification. An app could register more than one
// tray icon if it provides for multiple functions. For this
// app there is only one ID, which I've defined as the constant 1
tray.uID = TRAY_ICON_ID;

// Set the code for the message to be sent to this window when
// a notification occurs
tray.uCallbackMessage = UWM_TRAY_CALLBACK;

// Set the icon to the icon handle of the icon we loaded
tray.hIcon = icon;

// Set the string which is the text of the string to display
// when the mouse hovers over the icon.
// This is limited to 64 characters in Windows NT and
// 128 characters in Windows 2000/XP
lstrcpy(tray.szTip, tip);

// Set the flags. These flags indicate certain fields are defined
// in the NOTIFYICONDATA structure:
// NIF_MESSAGE: The uCallbackMessage field is valid
// NIF_ICON: The hIcon field is valid
// NIF_TIP: The szTip field is valid
tray.uFlags = NIF_MESSAGE | NIF_ICON | NIF_TIP;

// Set the notification icon
BOOL result = Shell_NotifyIcon(NIM_ADD, &tray);
if(result)
{ /* success */
//...you may want to do something to record that it succeeded
} /* success */
else
{ /* failure */
DWORD err = ::GetLastError();
//...you may want to do something to record the error
// In particular, you may want to disable the ability to
// hide the app because if there is no tray icon it
// will be impossible to make the app visible
} /* failure */

// We no longer need the icon handle, so the icon can be destroyed
::DestroyIcon(icon);
return result;
}

A corresponding routine is required to unregister the tray icon. If you don't unregister the icon, you will end up with multiple copies in the tray, and they will appear to spontaneously disappear when the tray is activated (if you normally keep it hidden), which is an ugly effect. Expect this to happen naturally if you are debugging and simply terminate the program in the middle of debugging.

void CRCONInterfaceDlg::unregisterTray()
{
NOTIFYICONDATA tray;

// Initialize the tray icon structure. To unregister, you must
// use the same hWnd and uID values as you used to register
tray.cbSize = sizeof(tray);
tray.hWnd = m_hWnd;
tray.uID = TRAY_ICON_ID;

// Unregister the icon
BOOL result = Shell_NotifyIcon(NIM_DELETE, &tray);
if(result)
{ /* success */
//... you may want to record in some way the fact that the
//... icon is unregistered
} /* success */
else
{ /* failure */
DWORD err = ::GetLastError();
//... you may want to record in some way the fact that the
//... icon failed to unregister
} /* failure */
}

Handling the Tray Icon menu

You need to register the tray callback message ID:

static UINT UWM_TRAY_CALLBACK =                                     
::RegisterWindowMessage(_T("UWM_TRAY_CALLBACK-")
_T("{6b8c4821-e6a4-11D1-8370-00aa005c0507}"));

You must add an entry to your MESSAGE_MAP, outside the magic AFX_ comments:

ON_REGISTERED_MESSAGE(UWM_TRAY_CALLBACK, OnTrayCallback)

You must declare the handling function in your header file, by creating an entry

    protected:
afx_msg LRESULT OnTrayCallback(WPARAM, LPARAM);

You then add the code to the .cpp file. Note that the wParam value is not needed. In this code, a double-click is designed to pop the window up, and a right-button click will pop up a menu.

LRESULT CRCONInterfaceDlg::OnTrayCallback(WPARAM, LPARAM lParam)
{
switch(lParam)
{ /* lParam */
case WM_LBUTTONDBLCLK:
visible = TRUE; // see previous section
ShowWindow(SW_SHOW);
SetForegroundWindow();
break;
case WM_RBUTTONDOWN:
createPopupMenu();
break;
} /* lParam */
return 0;
}

The popup menu handler requires a couple tricks, which are documented in KB article Q135788. Generally, it looks like any other way you would invoke TrackPopupMenu on a right-click, except for the special actions required by the KB article. You will simply add ordinary menu-handling methods using the ClassWizard, and create the menu using the ordinary menu-editing capabilities of the resource editor.

void CRCONInterfaceDlg::createPopupMenu()
{
CMenu top;
top.LoadMenu(IDR_TRAY_MENU);
CMenu * popup = top.GetSubMenu(0);


CPoint pt;
GetCursorPos(&pt);

if(popup != NULL)
popup->TrackPopupMenu(TPM_LEFTALIGN | TPM_LEFTBUTTON, pt.x, pt.y, this);

}

Change log

[Dividing Line Image]

Count.cgi?df=dialogapp.dat

The views expressed in these essays are those of the author, and in no way represent, nor are they endorsed by, Microsoft.

Send mail to newcomer@flounder.com with questions or comments about this web site.
Copyright © 1999-2003 The Joseph M. Newcomer Co. All Rights Reserved
Last modified: June 13, 2003

转载于:https://www.cnblogs.com/userinterface/archive/2005/05/13/154598.html

标签:control,based,Creating,App,handler,dialog,tray,your,icon
来源: https://blog.csdn.net/weixin_34238642/article/details/93389206