其他分享
首页 > 其他分享> > keepalived结合nfs实现生产环境高可用

keepalived结合nfs实现生产环境高可用

作者:互联网

keepalived结合nfs实现生产环境高可用-oldlai

1、服务器无可厚非会遇到意外宕机的情况,如果服务端出现故障,那么客户端挂载的目录将不可用,如果这个目录是挂载给用户作为静态资源,那么前端就无法访问了。因为我们并不知道哪个服务器会挂,或者说,直接挂载某个ip,如果该服务器挂了,如何实现切换,又是一个需要解决的痛点问题。

2、对于上面的痛点问题我们就需要用到keeplived工具了,它会为我们虚拟出一个IP,我们只需要挂载这个IP即可,该IP会首先绑定在主服务器上,如果主服务器上的nfs宕机或者是主服务器宕机,则会漂移到备用服务器上,而客户端挂载的还是虚拟IP。

3、基于上述问题我们用概念图来解释一下

nfs概念图

B服务器一旦挂了,vip则漂移到C服务上,如下:

4、前面提出了nfs服务挂了的痛点问题下面我们就这个问题进行解决

具体解决办法实现

生产环境服务器规格

服务器名称 服务器IP地址 网卡名称 备注
keepalived 10.0.0.3 eth0
master(B) 10.0.0.61 eth0
nfs客户端(A) 10.0.0.120 eth0
backup(C) 10.0.0.62 eth0

1、后端B、C两台服务器均部署keepalived

B服务器和C服务器均执行如下命令
root@master:~ # yum install keepalived -y
[root@backup ~]# yum install keepalived -y

2、备份原配置文件,然后修改配置文件:

#master的keepalived的配置文件
root@master:~ # cd /etc/keepalived/
您在 /var/spool/mail/root 中有新邮件
root@master:/etc/keepalived # pwd
/etc/keepalived
root@master:/etc/keepalived # 
root@master:/etc/keepalived # cat keepalived.conf
! Configuration File for keepalived
 global_defs {
  notification_email {
      root@localhost
 }
    notification_email_from 1026044760@qq.com
    smtp_server 127.0.0.1
    smtp_connect_timeout 30
    router_id LVS_DEVEL
 }
vrrp_script check_nfs {
    script "/data/sh/check_nfs.sh"
    interval 2
    weight -20
 }

# VIP1
vrrp_instance VI_1 {
     state MASTER
     interface eth0
     virtual_router_id 51
     priority 90
     advert_int 5
     authentication {
         auth_type  PASS
         auth_pass  1111
     }
     virtual_ipaddress {
        10.0.0.3/24  label eth0:0
     }
     track_script {
        check_nfs
    }
}
# backup备用服务器配置文件
[root@backup keepalived]# cat keepalived.conf 
! Configuration File for keepalived
 global_defs {
  notification_email {
      root@localhost
 }
    notification_email_from 1026044760@qq.com
    smtp_server 127.0.0.1
    smtp_connect_timeout 30
    router_id LVS_DEVEL
 }
vrrp_script check_nfs {
    script "/data/sh/check_nfs.sh"
    interval 2
    weight -20
 }

# VIP1
vrrp_instance VI_1 {
     state BACKUP
     interface eth0
     virtual_router_id 51
     priority 80
     advert_int 5
     authentication {
         auth_type  PASS
         auth_pass  1111
     }
     virtual_ipaddress {
        10.0.0.3/24  label eth0:0
     }
     track_script {
        check_nfs
    }
}

3、master和backup服务器创建用于检测nfs是否存在的脚本

#master
root@master:/data/sh # cat check_nfs.sh 
#!/bin/bash
#by oldlai
##############

killall -0 nfsd
if [ $? -ne 0 ];then
        systemctl stop keepalived
fi
#backup 
[root@backup keepalived]# cat /data/sh/check_nfs.sh 
#!/bin/bash
#by oldlai
##############

killall -0 nfsd
if [ $? -ne 0 ];then
        systemctl stop keepalived
fi

4、启动rpcbind,nfs,keepalived服务:

#master节点
root@master:~ # systemctl start rpcbind 
root@master:~ # systemctl start nfs 
root@master:~ # systemctl start keepalived
#backup节点
[root@backup ~]# systemctl start rpcbind 
[root@backup ~]# systemctl start nfs
[root@backup ~]# systemctl start keepalived
备注:这三个服务的启动次序不要搞错

5、在master服务器上查看虚拟IP

root@master:~ # ifconfig 
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 10.0.0.61  netmask 255.255.255.0  broadcast 10.0.0.255
        ether 00:0c:29:1c:a0:df  txqueuelen 1000  (Ethernet)
        RX packets 399134  bytes 122155578 (116.4 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 311571  bytes 86941574 (82.9 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

eth0:0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet ** 10.0.0.3 **  netmask 255.255.255.0  broadcast 0.0.0.0
        ether 00:0c:29:1c:a0:df  txqueuelen 1000  (Ethernet)

eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 172.16.1.61  netmask 255.255.255.0  broadcast 172.16.1.255
        inet6 fe80::20c:29ff:fe1c:a0e9  prefixlen 64  scopeid 0x20<link>
        ether 00:0c:29:1c:a0:e9  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 16  bytes 1286 (1.2 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 49388  bytes 4096178 (3.9 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 49388  bytes 4096178 (3.9 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

6、将master的nfs服务关掉,查看vip,这时vip会漂移到backup服务器上

root@master:~ # systemctl stop nfs
root@master:~ # ifconfig 
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 10.0.0.61  netmask 255.255.255.0  broadcast 10.0.0.255
        ether 00:0c:29:1c:a0:df  txqueuelen 1000  (Ethernet)
        RX packets 447446  bytes 132536968 (126.3 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 352379  bytes 99609300 (94.9 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 172.16.1.61  netmask 255.255.255.0  broadcast 172.16.1.255
        inet6 fe80::20c:29ff:fe1c:a0e9  prefixlen 64  scopeid 0x20<link>
        ether 00:0c:29:1c:a0:e9  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 16  bytes 1286 (1.2 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 49438  bytes 4100328 (3.9 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 49438  bytes 4100328 (3.9 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

backup 服务器的IP:
[root@backup ~]# ifconfig 
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 10.0.0.62  netmask 255.255.255.0  broadcast 10.0.0.255
        ether 00:0c:29:9d:c8:07  txqueuelen 1000  (Ethernet)
        RX packets 143391  bytes 108149745 (103.1 MiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 97770  bytes 13936087 (13.2 MiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

eth0:0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 10.0.0.3  netmask 255.255.255.0  broadcast 0.0.0.0
        ether 00:0c:29:9d:c8:07  txqueuelen 1000  (Ethernet)

eth1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 172.16.1.62  netmask 255.255.255.0  broadcast 172.16.1.255
        inet6 fe80::20c:29ff:fe9d:c811  prefixlen 64  scopeid 0x20<link>
        ether 00:0c:29:9d:c8:11  txqueuelen 1000  (Ethernet)
        RX packets 6  bytes 360 (360.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 13  bytes 1016 (1016.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 20  bytes 1476 (1.4 KiB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 20  bytes 1476 (1.4 KiB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

备注: 到这里说明vip已经可以正常漂移,我们只需要在nfs客户端挂载vip即可

7、客户端挂载目录,然后创建如下脚本:

挂载:

mount -t nfs -o soft,timeo=10 10.0.0.3:/data/lutixia /mnt/nfs

推荐使用软挂载,默认是硬挂载。使用软挂载,服务端宕机,不会一直阻塞。

客户端检测脚本

[root@khd ~]# cat check_nfs.sh
#!/bin/bash
#by oldlai
###############
while true;do
ls /mnt/nfs &> /dev/null
if [ $? -ne 0 ];then
        umount -l /mnt/nfs && mount -t nfs -o soft,timeo=10 10.0.0.3:/data/lutixia /mnt/nfs
fi
sleep 1
done

备注:如果客户端已经挂载了,服务端某台服务器宕机了,即使vip切换了,但是还是会报错,以前失效的挂载连接还在。所以需要卸载,重新挂载一次,这个脚本会每秒检测一次。

8.客户端配置定时任务

#客户端
[root@master ~]# crontab -l
* * * * * /usr/bin/bash /root/check_nfs.sh >/dev/null
[root@khd ~]# cat check_nfs.sh
#!/bin/bash
#by oldlai
###############
while true;do
ls /mnt/nfs &> /dev/null
if [ $? -ne 0 ];then
        umount -l /mnt/nfs && mount -t nfs -o soft,timeo=10 10.0.0.3:/data/lutixia /mnt/nfs
fi
sleep 1
done

标签:可用,keepalived,RX,overruns,nfs,master,root
来源: https://www.cnblogs.com/lailaoban/p/16657615.html