gitlab安装及汉化

gitlab的安装

 

首先在网上下载好任意版本gitlab的rpm包

推荐下面的地址：

https://mirrors.tuna.tsinghua.edu.cn/gitlab-ce/yum/el7/gitlab-ce-8.8.5-ce.1.el7.x86_64.rpm

[root@linux-node1 ~]# rz -E

rz waiting to receive.

[root@linux-node1 ~]# ls

anaconda-ks.cfg gitlab-ce-8.8.5-ce.1.el7.x86_64.rpm

[root@linux-node1 ~]# rpm -ivh gitlab-ce-8.8.5-ce.1.el7.x86_64.rpm
#安装

Preparing... ################################# [100%]

Updating / installing...

1:gitlab-ce-8.8.5-ce.1.el7 ################################# [100%]

gitlab: Thank you for installing GitLab!

gitlab: To configure and start GitLab, RUN THE FOLLOWING COMMAND:

 

sudo
gitlab-ctl reconfigure #配置并启动gitlab

 

gitlab: GitLab should be reachable at http://linux-node1 默认的访问地址

gitlab: Otherwise configure GitLab for your system by editing /etc/gitlab/gitlab.rb file #gitlab的配置文件，修改之后需要重新gitlab-ctl reconfigure

gitlab: And running reconfigure again.

gitlab:

gitlab: For a comprehensive list of configuration options please see the Omnibus GitLab readme

gitlab: https://gitlab.com/gitlab-org/omnibus-gitlab/blob/master/README.md

gitlab:

It looks like GitLab has not been configured yet; skipping the upgrade script.

[root@linux-node1 ~]#

 

 

 

gitlab的配置

 

这里我先修改下配置文件

vim /etc/gitlab/gitlab.rb #修改配置文件

修改结果如下：

[root@linux-node1 ~]# grep -n "^[a-Z]" /etc/gitlab/gitlab.rb

11:external_url 'http://192.168.56.11'

 

[root@linux-node1 ~]# gitlab-ctl reconfigure #配置并启动gitlab

 

打开浏览器输入http://192.168.56.11 #192.168.56.11我的本机ip

第一次登录要求设置root密码

登录成功之后，是这样的

 

 

gitlab的汉化：

 

[root@linux-node1 ~]# rz

[root@linux-node1 ~]# ls

anaconda-ks.cfg gitlab-ce-8.8.5-ce.1.el7.x86_64.rpm gitlabhq.tar.gz

[root@linux-node1 ~]# tar xf gitlabhq.tar.gz

[root@linux-node1 ~]# ls

anaconda-ks.cfg gitlab-ce-8.8.5-ce.1.el7.x86_64.rpm gitlabhq gitlabhq.tar.gz

 

###关于这个也可以直接git clone git clone https://github.com/larryli/gitlabhq.git

 

[root@linux-node1 ~]# cp -r /opt/gitlab/embedded/service/gitlab-rails{,.ori}

[root@linux-node1 ~]# gitlab-ctl stop

ok: down: gitlab-workhorse: 1s, normally up

ok: down: logrotate: 0s, normally up

ok: down: nginx: 0s, normally up

ok: down: postgresql: 1s, normally up

ok: down: redis: 0s, normally up

ok: down: sidekiq: 0s, normally up

ok: down: unicorn: 0s, normally up

[root@linux-node1 ~]# \cp -rf /root/gitlabhq/* /opt/gitlab/embedded/service/gitlab-rails/

cp: cannot overwrite non-directory '/opt/gitlab/embedded/service/gitlab-rails/log' with directory '/root/gitlabhq/log'

cp: cannot overwrite non-directory '/opt/gitlab/embedded/service/gitlab-rails/tmp' with directory '/root/gitlabhq/tmp'

#这里的错误，忽略，因为之前已经设置gitlab的root密码了

[root@linux-node1 ~]# gitlab-ctl start

ok: run: gitlab-workhorse: (pid 25910) 0s

ok: run: logrotate: (pid 25914) 0s

ok: run: nginx: (pid 25920) 1s

ok: run: postgresql: (pid 25925) 0s

ok: run: redis: (pid 25933) 1s

ok: run: sidekiq: (pid 25937) 0s

ok: run: unicorn: (pid 25941) 0s

 

汉化完成之后的效果

 

 

注意事项

 

汉化之后，不要进行版本升级，很容易出现502！切记！还有生产环境中，尽量用域名，迁移方便

标签：0s,ok,安装,gitlab,汉化,linux,node1,root
来源： https://www.cnblogs.com/khstudy/p/16611451.html