Can I skip the lock when reading an integer?

Posted on March 12, 2014

Today, a question from a Coverity customer:

Here is a greatly simplified version of our code:

public class TestLock
{
  private object threadLock = new object();
  private int value = 0;
  public void Start()
  {
    lock (threadLock) { value = 100; }
  }
  public void Finish()
  {
    lock (threadLock)
    {
      if (value != 0 )
        value = 0;
    }
  }
  public void Increment()
  {
    lock (threadLock)
    {
      if (value != 0) 
        value += 10;
    }
  }
  public int GetValue()
  {
    return value; // No lock!
  }
}

The start, finish and increment operations are all either mutating or non-atomic operations, or both, so they are locked. But the get-value operation is guaranteed by the C# specification to be atomic, so we figure that we can safely remove the lock. Is this correct?

The short answer is: Please do not elide the lock regardless of its correctness. It’s dangerous and the benefit is absurdly tiny compared to the risk.

The slightly longer answer is: The fact that you’re asking the question in the first place means that you don’t have a strong enough understanding of the memory model of C# in order to correctly write low-lock code, so it should be avoided. In fact, I’m not a big fan of multithreaded code in the first place. If you can avoid writing multithreaded code, do so. If you cannot, then use the highest level of abstraction available to you: use tools like the Task Parallel Library to efficiently manage worker threads on your behalf. If you cannot do that, then at least avoid sharing memory across threads. If you cannot do that, then at least lock all the memory that you do share across threads. Writing low-lock code should be the last thing you consider doing, not the first.

The attentive reader will note that neither of those two “answers” actually answered the question. **It’s time for the verbose answer!

**
First off, let’s talk about atomicity.

You are correct that the C# specification promises that reads and writes of 32 bit integer fields are atomic. That is, they cannot be “torn”. A write to a 64 bit integer variable can be treated as two independent writes to two adjacent 32 bit variables, and therefore two threads that are both trying to assign values to those two adjacent variables at the same time can race. It is possible to end up with a value that is half from the first thread and half from the second thread, which is very confusing. The 32, 16, and 8 bit integer types and the bool and char types are all guaranteed to be atomic for individual reads and writes, provided that the developer has not done something silly like force the integer to be misaligned.

You are also correct that more complex operations, such as test-and-set or increment are not atomic, and therefore need to be protected against races.

So the unlocked read will at least be atomic in the sense that we never get a “torn” value out. Now, if we had something like:

    lock (threadLock)
    {
        value += 5;
        DoSomething();
        value += 5;
    }

then the unlocked access is immediately suspicious because it can read a value after the first increment but before the second increment, and that might be unexpected. Let’s assume that you are not in that situation.

Now let’s talk about locks. Locks provide two guarantees in C#.

First, there is the obvious purpose of a lock. The locked object is a monitor; only one thread may have a given monitor locked at a time. A thread which attempts to take a monitor that has been acquired by another thread will block until it can obtain access.

There is a second guarantee of a lock that is more subtle. The C# compiler, JIT compiler and CPU are all permitted to make optimizations provided that the optimization is undetectable by the current thread. In particular, reads and writes of variables may be re-ordered or eliminated entirely provided that doing so is not observable to the current thread. For example, consider the program fragment:

someInteger = someOtherInteger;
someIntegerJustChanged = true;

Given that there is no code between the two statements there is no way for the thread that runs this code to detect what order the mutations happen in. It would be perfectly legal for these two mutations to be re-ordered if the CPU decided that it was more efficient to do so. The current thread cannot tell the difference, but another thread could observe the mutations to happen in the “wrong” order. (I note that on x86-based hardware this particular reordering of writes is actually never observed; those CPUs do not perform this optimization. There is no requirement that all C# programs be run only on x86-based hardware!)

A lock introduces a restriction on these optimizations. In particular: no read may be moved before the beginning of a lock statement, and no write may be moved after the end of a lock statement. Let’s compare these two pieces of code:

  public int GetValue()
  {
    return value; // No lock!
  }

vs

  public int GetValue()
  {
    lock(threadLock) { return value; }
  }

What’s the difference?

In the latter version the CPU may not move the read backwards past the beginning of the lock, and may not move any write that happened before the method was entered to a point after the end of the lock.

In the former, the CPU may as an optimization choose to move the read arbitrarily far “backwards in time” with respect to other reads and writes on this thread provided that doing so is not detectable by the current thread. But that fact could be observed by another thread, and since we know that this program definitely reads memory locations on multiple threads, I am worried. Perhaps some other thread is expecting that the read of this value will be observed to occur in a particular order with respect to the write of some other value. You said that this is a greatly simplified version of the real program, and therefore we cannot reason from the correctness of this program to the correctness of the original program! There are a number of scenarios:

Scenario one: The authors of the code do not know that their program is correct without the lock, and do not have a solid customer-impacting performance reason to elide the lock, but are doing so anyways just for the heck of it. Fortunately for them, by sheer luck their code does not actually have a customer-impacting bug, and equally fortunately, by sheer luck no future edit to the code will introduce such a bug. Also, no future update to the C# compiler, JIT compiler or CPU optimization will ever introduce a bug either.

Scenario two: The original program has a subtle bug, or a bug will be introduced in the future via a code change, compiler update, and so on. Some other thread assumes that the unlocked read will not be moved backwards in time with respect to some other read or write, but in fact this optimization is not only permitted, but will be performed. This fact becomes observable on a thread that then behaves incorrectly as a result. The code therefore has a bug that is difficult to detect and practically impossible to reproduce.

Scenario three: The authors of the original code, who we recall are asking the question about thread safety to begin with, are actually asking a rhetorical question. They fully understand all the ramifications of every possible CPU reordering and have analyzed all those possible reorderings to determine that there is never a bug in their program under any of those conditions. Moreover, they wish to avoid the roughly 10 or 20 nanosecond penalty of the uncontested lock for performance reasons, because that one-hundred-millionth of a second penalty both observable by and unacceptable to their users. And finally, the authors will carefully review every single change ever made to this program in the future with an eye to the possible bugs introduced by reordering optimizations. Avoiding that 10 ns penalty is worth the enormous cost in expert code reviews and the high risk of getting it wrong.

My guess is that the developers are 99% likely to be in scenario one, 0.99% likely to be in scenario two, and 0.01% likely to be in scenario three. I also hazard a guess that the developers have no solid customer-impacting performance reason to elide that lock. Is the expected benefit of a 10 ns savings that no customer will notice really worth the cost, that by chance some impossible-to-detect-and-reproduce bug is in this program? I doubt it. Therefore my recommendation would be to always lock every access to a field that can be shared across threads, even if you think that eliding the lock is 99.99% likely to be harmless. The nano-scale benefit is simply not worth the macro-scale costs of verifying that the elision is correct, and certainly not worth the risk that the code is incorrect now or might become incorrect in the future. Code which avoids locks is extremely difficult to reason about, so make your life easier: if you can, don’t write shared memory code to begin with. If you have to, use locks consistently.

UPDATE: This article was originally posted on the Coverity Dev Testing Blog and has since been deleted; a number of commenters on the original article asked if marking the field volatile magically prevents reordering bugs.

The specific problem with that proposal is that volatile reads and locks do not have the same semantics. A volatile read can be moved backwards in time with respect to a volatile write, and the x86 processor will actually do so, but a read, volatile or otherwise, cannot be moved backwards in time past the beginning of a lock.

The more general problem is: we have a toy example that is greatly simplified from the real code, and therefore we don’t know what invariants the real code relies upon. Trying to deducing whether a real gun is safe by examining a toy gun is a dangerous proposition.

In an upcoming article I will give an example where every variable is volatile, but eliding locks on some of them can produce an unexpected violation of what appears to be a program invariant.

标签：code,thread,skip,when,value,will,program,lock,reading
来源： https://www.cnblogs.com/dewxin/p/16414884.html