首页 > 其他分享> > RAC19详细安装步骤

RAC19详细安装步骤

2022-05-02 23:31:50 作者：互联网

CentOS7.6搭建RAC

1.系统环境配置

1.1概述

搭建两个节点的rac集群，其每个节点均有两个网卡，public网卡和private网卡。两个节点的主机名分别为rac1和rac2

1.2 参数设置（RAC1&RAC2）

编辑/etc/hosts文件

vim /etc/hosts

注释掉以下内容,

#127.0.0.1   localhost rac1 localhost4 localhost4.localdomain4
#::1         localhost rac1 localhost6 localhost6.localdomain6

注：如果没有注释上述内容，在安装rac的先决条件检查时，会报PRVG-13632错误。

追加以下内容

#RAC-PUBLIC-IP
192.168.100.101 rac1
192.168.100.102 rac2

#RAC-PRIVATE-IP
10.10.10.101 rac1-priv
10.10.10.102 rac2-priv

#RAC-VIP
192.168.100.201 rac1-vip
192.168.100.202 rac2-vip

#RAC-SCAN-IP
192.168.100.200 rac-scan

1.3 关闭防火墙

关闭防火墙服务

systemctl disable firewalld.service

selinux配置

vi /etc/selinux/config

把enforcing更改为disabled

# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
#     enforcing - SELinux security policy is enforced.
#     permissive - SELinux prints warnings instead of enforcing.
#     disabled - No SELinux policy is loaded.
SELINUX=disabled
# SELINUXTYPE= can take one of three values:
#     targeted - Targeted processes are protected,
#     minimum - Modification of targeted policy. Only selected processes are protected.
#     mls - Multi Level Security protection.
SELINUXTYPE=targeted

挂载系统光盘

配置本地yum源

mkdir /yums
cd /run/media/root/CentOS 7 x86_64/Packages
cp * /yums
rpm -ivh deltarpm-3.6-3.el7.x86_64.rpm 
rpm -ivh python-deltarpm-3.6-3.el7.x86_64.rpm 
rpm -ivh createrepo-0.9.9-28.el7.noarch.rpm
cd  /yums
createrepo .
vi /etc/yum.repos.d/yum.local.repo

[local]
name=yum local repo
baseurl=file:///yums
gpgcheck=0
enable=1

安装依赖包

yum install -y bc
yum install -y compat-libcap1*
yum install -y compat-libcap*
yum install -y binutils 
yum install -y compat-libstdc++-33 
yum install -y elfutils-libelf 
yum install -y elfutils-libelf-devel 
yum install -y gcc 
yum install -y gcc-c++ 
yum install -y glibc-2.5 
yum install -y glibc-common 
yum install -y glibc-devel 
yum install -y glibc-headers 
yum install -y ksh libaio 
yum install -y libaio-devel 
yum install -y libgcc 
yum install -y libstdc++ 
yum install -y libstdc++-devel 
yum install -y make 
yum install -y sysstat 
yum install -y unixODBC 
yum install -y unixODBC-devel
yum install -y binutils*
yum install -y compat-libstdc*
yum install -y elfutils-libelf*
yum install -y gcc*
yum install -y glibc*
yum install -y ksh*
yum install -y libaio*
yum install -y libgcc*
yum install -y libstdc*
yum install -y make*
yum install -y sysstat*
yum install -y libXp*
yum install -y glibc-kernheaders
yum install -y net-tools-*
yum install -y iscsi-initiator-utils
yum install -y udev
yum install -y xclock*

手动上传以下依赖包并安装

rpm -ivh cvuqdisk-1.0.10-1.rpm
rpm -ivh rlwrap-0.37-1.el6.x86_64.rpm
yum install -y compat-libstdc++-33-3.2.3-72.el7.x86_64.rpm
yum install -y kmod-20-21.el7.x86_64.rpm
yum install -y kmod-libs-20-21.el7.x86_64.rpm

关闭透明大页

cp /etc/default/grub /etc/default/grub.bak
vi /etc/default/grub

追加一行

GRUB_CMDLINE_LINUX="rd.lvm.lv=centos/root rd.lvm.lv=centos/swap rhgb quiet transparent_hugepage=never"

GRUB_CMDLINE_LINUX="rd.lvm.lv=centos/root rd.lvm.lv=centos/swap rhgb quiet transparent_hugepage=never"
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="$(sed 's, release .*$,,g' /etc/system-release)"
GRUB_DEFAULT=saved
GRUB_DISABLE_SUBMENU=true
GRUB_TERMINAL_OUTPUT="console"
GRUB_CMDLINE_LINUX="crashkernel=auto rd.lvm.lv=centos/root rd.lvm.lv=centos/swap rhgb quiet"
GRUB_DISABLE_RECOVERY="true"
GRUB_CMDLINE_LINUX="rd.lvm.lv=centos/root rd.lvm.lv=centos/swap rhgb quiet transparent_hugepage=never"

内核参数配置

vi /etc/sysctl.conf

kernel.shmmax = 2126008812
kernel.shmmni = 4096
kernel.sem = 250 32000 100 128
net.core.rmem_default = 262144
net.core.rmem_max = 4194304
net.core.wmem_default = 262144
net.core.wmem_max = 1048586
fs.file-max = 6815744
kernel.shmall = 393216
net.ipv4.tcp_max_tw_buckets = 6000
net.ipv4.ip_local_port_range = 9000 65500
net.ipv4.tcp_tw_recycle = 0
net.ipv4.tcp_tw_reuse = 1
#net.core.somaxconn = 262144
net.core.netdev_max_backlog = 262144
net.ipv4.tcp_max_orphans = 262144
net.ipv4.tcp_max_syn_backlog = 262144
net.ipv4.tcp_synack_retries = 2
net.ipv4.tcp_syn_retries = 1
net.ipv4.tcp_fin_timeout = 1
net.ipv4.tcp_keepalive_time = 30
net.ipv4.tcp_keepalive_probes = 6
net.ipv4.tcp_keepalive_intvl = 5
net.ipv4.tcp_timestamps = 0
fs.aio-max-nr = 1048576
net.ipv4.conf.all.rp_filter = 2
net.ipv4.conf.default.rp_filter = 2

生成系统参数

sysctl -p

注：

kernel.shmmax：

用于定义单个共享内存段的最大值。设置应该足够大，能在一个共享内存段下容纳下整个的 SGA。32 位 linux 系统：可取最大值为 4GB （ 4294967296bytes ） -1byte;64 位 linux 系统：可取的最大值为物理内存值 -1byte.

建议值为多于物理内存的一半，一般取值大于 SGA_MAX_SIZE 即可，可以取物理内存 -1byte

kernel.shmall ：

可以使用的共享内存的总页数, Linux 共享内存页大小为 4KB

修改pam.d/login

vim /etc/pam.d/login

session required /lib/security/pam_limits.so
session required pam_limits.so

系统资源限制配置

vim /etc/security/limits.conf

oracle   soft   nofile    1024
oracle   hard   nofile    65536
oracle   soft   nproc    16384
oracle   hard   nproc    16384
oracle   soft   stack    10240
oracle   hard   stack    32768
oracle   hard   memlock    134217728
oracle   soft   memlock    134217728

grid   soft   nofile    1024
grid   hard   nofile    65536
grid   soft   nproc    16384
grid   hard   nproc    16384
grid   soft   stack    10240
grid   hard   stack    32768
grid   hard   memlock    134217728
grid   soft   memlock    134217728

配置环境变量

vim /etc/profile

if [ $USER = "oracle" ] || [ $USER = "grid" ]; then
   if [ $SHELL = "/bin/ksh" ]; then
      ulimit -p 16384
      ulimit -n 65536
      else
      ulimit -u 16384 -n 65536
   fi
fi

生成环境变量

source /etc/profile

添加用户和用户组、创建目录

groupadd -g 601 oinstall
groupadd -g 602 dba
groupadd -g 603 oper
groupadd -g 604 backupdba
groupadd -g 605 dgdba
groupadd -g 606 kmdba
groupadd -g 607 asmdba
groupadd -g 608 asmoper
groupadd -g 609 asmadmin
useradd -u 601 -g oinstall -G asmadmin,asmdba,dba,asmoper grid
useradd -u 602 -g oinstall -G dba,backupdba,dgdba,kmdba,asmadmin,oper,asmdba oracle

创建用户密码

passwd grid
passwd oracle

创建Oracle Inventory目录

mkdir -p /u01/app/oraInventory
chown -R grid:oinstall /u01/app/oraInventory
chmod -R 775 /u01/app/oraInventory

创建GI HOME目录

mkdir -p /u01/app/grid
mkdir -p /u01/app/19c/grid
chown -R grid:oinstall /u01/app/grid
chmod -R 775 /u01/app/grid
chown -R grid:oinstall /u01/app/19c
chmod -R 775 /u01/app/19c/

创建Oracle Base目录

mkdir -p /u01/app/oracle
mkdir /u01/app/oracle/cfgtoollogs 
chown -R oracle:oinstall /u01/app/oracle
chmod -R 775 /u01/app/oracle

创建Oracle RDBMS Home目录

mkdir -p /u01/app/oracle/product/19c/db_1
chown -R oracle:oinstall /u01/app/oracle/product/19c/db_1
chmod -R 775 /u01/app/oracle/product/19c/db_1

给grid用户配置环境变量

切换到grid用户

su - grid

编辑bash_profile配置文件

vim ~/.bash_profile

PS1="[`whoami`@`hostname`:"'$PWD]$'
export PS1
umask 022
export TMP=/tmp
export TMPDIR=$TMP
export ORACLE_SID=+ASM1
export ORACLE_TERM=xterm;
export ORACLE_BASE=/u01/app/grid
export ORACLE_HOME=/u01/app/19c/grid
export NLS_LANG="AMERICAN_AMERICA.AL32UTF8"
export NLS_DATE_FORMAT="yyyy-mm-dd HH24:MI:SS"
export TNS_ADMIN=$ORACLE_HOME/network/admin
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib  
export PATH=.:$PATH:$HOME/bin:$ORACLE_HOME/bin
export THREADS_FLAG=native
if [ $USER = "oracle" ] || [ $USER = "grid" ]; then
        if [ $SHELL = "/bin/ksh" ];then
            ulimit -p 16384
            ulimit -n 65536
        else
            ulimit -u 16384 -n 65536
        fi
    umask 022
fi
alias sqlplus='rlwrap sqlplus'
alias rman='rlwrap asmcmd'

注：以下参数RAC1和RAC2的需设置不同参数

RAC1&RAC2：ORACLE_SID=+ASM1 / ASM2

生成环境变量

source ~/.bash_profile

给oracle配置环境变量

切换用户

su - oracle

配置bash_profile文件

vim ~/.bash_profile

PS1="[`whoami`@`hostname`:"'$PWD]$'
export PS1
export TMP=/tmp
export TMPDIR=$TMP
export ORACLE_HOSTNAME=rac1
export ORACLE_BASE=/u01/app/oracle
export ORACLE_HOME=/u01/app/oracle/product/19c/db_1
export ORACLE_SID=orcl1
export NLS_LANG="AMERICAN_AMERICA.AL32UTF8"
export NLS_DATE_FORMAT="yyyy-mm-dd HH24:MI:SS"
export TNS_ADMIN=$ORACLE_HOME/network/admin
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib  
export PATH=.:$PATH:$HOME/bin:$ORACLE_BASE/product/19c/db_1/bin:$ORACLE_HOME/bin
export THREADS_FLAG=native;export THREADS_FLAG
if [ $USER = "oracle" ] || [ $USER = "grid" ]; then
        if [ $SHELL = "/bin/ksh" ];then
            ulimit -p 16384
            ulimit -n 65536
        else
            ulimit -u 16384 -n 65536
        fi
    umask 022
fi

alias sqlplus='rlwrap sqlplus'
alias rman='rlwrap rman'

注：以下参数RAC1和RAC2的需设置不同参数

ORACLE_HOSTNAME=rac1/rac2
ORACLE_SID=orcl1/orcl2

生成环境变量

source ~/.bash_profile

配置ISCSI挂载外部存储

切换到root用户

su - root

安装ISCSI客户端软件

yum -y install iscsi-initiator-utils

设置开机自动启动

chkconfig iscsid on

查找target

iscsiadm -m discovery -t sendtargets -p 192.168.100.103

手动登录target

iscsiadm -m node -T iqn.2022.04.com.rac:iscsi.disk -p 192.168.100.103 -l

设置开机自动登录target

iscsiadm -m node -T iqn.2022.04.com.rac:iscsi.disk --op update -n node.startup -v automatic

查看共享磁盘

cd /dev/disk/by-path
ls -l /dev/disk/by-path/*iscsi* | awk '{FS=" "; print $9 " " $10 " " $11}'

/dev/disk/by-path/ip-192.168.100.103:3260-iscsi-iqn.2022.04.com.rac:iscsi.disk-lun-1 -> ../../sdb
/dev/disk/by-path/ip-192.168.100.103:3260-iscsi-iqn.2022.04.com.rac:iscsi.disk-lun-2 -> ../../sdc
/dev/disk/by-path/ip-192.168.100.103:3260-iscsi-iqn.2022.04.com.rac:iscsi.disk-lun-3 -> ../../sdd
/dev/disk/by-path/ip-192.168.100.103:3260-iscsi-iqn.2022.04.com.rac:iscsi.disk-lun-4 -> ../../sde
/dev/disk/by-path/ip-192.168.100.103:3260-iscsi-iqn.2022.04.com.rac:iscsi.disk-lun-5 -> ../../sdf
/dev/disk/by-path/ip-192.168.100.103:3260-iscsi-iqn.2022.04.com.rac:iscsi.disk-lun-6 -> ../../sdg

查看磁盘wwid

[root@rac1 by-path]# for i in $(ls /dev/sd*|grep -v [0-9]|grep -v sda)
> do  
> echo -ne "$(fdisk -l ${i}|grep ^Disk|grep ${i}|awk '{print $1,$2,$3,$4}') WWID:"  
> /lib/udev/scsi_id -g -u -d "${i}"
> done|sort -nk3 -k5|column -t
Disk  /dev/sdb:  21.5  GB,  WWID:360000000000000000e00000000010001
Disk  /dev/sdc:  21.5  GB,  WWID:360000000000000000e00000000010002
Disk  /dev/sdd:  21.5  GB,  WWID:360000000000000000e00000000010003
Disk  /dev/sde:  21.5  GB,  WWID:360000000000000000e00000000010004
Disk  /dev/sdf:  21.5  GB,  WWID:360000000000000000e00000000010005
Disk  /dev/sdg:  21.5  GB,  WWID:360000000000000000e00000000010006
[root@rac1 by-path]#

vi /etc/udev/rules.d/99-oracle-asmdevices.rules
# 打开文件后填入以下内容
KERNEL=="sd*", ENV{ID_SERIAL}=="360000000000000000e00000000010001", SYMLINK+="asm_data",  OWNER="grid",  GROUP="asmadmin", MODE="0660"
KERNEL=="sd*", ENV{ID_SERIAL}=="360000000000000000e00000000010002", SYMLINK+="asm_bak",  OWNER="grid",  GROUP="asmadmin", MODE="0660"
KERNEL=="sd*", ENV{ID_SERIAL}=="360000000000000000e00000000010003", SYMLINK+="asm_fra",  OWNER="grid",  GROUP="asmadmin", MODE="0660"
KERNEL=="sd*", ENV{ID_SERIAL}=="360000000000000000e00000000010004", SYMLINK+="asm_ocr_1",  OWNER="grid",  GROUP="asmadmin", MODE="0660"
KERNEL=="sd*", ENV{ID_SERIAL}=="360000000000000000e00000000010005", SYMLINK+="asm_ocr_2",  OWNER="grid",  GROUP="asmadmin", MODE="0660"
KERNEL=="sd*", ENV{ID_SERIAL}=="360000000000000000e00000000010006", SYMLINK+="asm_ocr_3",  OWNER="grid",  GROUP="asmadmin", MODE="0660"

使udev生效

udevadm control --reload-rules
udevadm trigger

avahi-daemon 配置

yum install -y avahi*
systemctl stop avahi-daemon.socket
systemctl stop avahi-daemon.service
pgrep -f avahi-daemon | awk '{print "kill -9 "$2}'
systemctl disable avahi-daemon.socket
systemctl disable avahi-daemon.service
cat <<EOF>>/etc/sysconfig/network
NOZEROCONF=yes
EOF

时间同步配置

禁用chronyd

yum install -y chrony
timedatectl set-timezone Asia/Shanghai
systemctl stop chronyd.service
systemctl disable chronyd.service

配置时间同步定时任务

yum install -y ntpdate
##192.168.100.150为时间服务器IP，每天12点同步系统时间
vim /var/spool/cron/root

00 12 * * * /usr/sbin/ntpdate -u 192.168.100.150 && /usr/sbin/hwclock -w

##手动执行
/usr/sbin/ntpdate -u 192.168.100.150 && /usr/sbin/hwclock -w

2.RAC安装（RAC1）

2.1节点互信

节点互信

上传sshUserSetup.sh脚本到/root

注：这个脚本是Oracle提供的，可以解压Oracle压缩包或者Grid压缩包，查找该脚本上传到rac1即可

sh sshUserSetup.sh -user root -hosts "rac1 rac2" -advanced -noPromptPassphrase
sh sshUserSetup.sh -user grid -hosts "rac1 rac2" -advanced -noPromptPassphrase
sh sshUserSetup.sh -user oracle -hosts "rac1 rac2" -advanced -noPromptPassphrase

2.2 Grid安装

上传Grid文件

把LINUX.X64_193000_grid_home.zip上传到/u01/app/19c/grid

cd /u01/app/19c/grid
chown -R grid:oinstall LINUX.X64_193000_grid_home.zip

切换grid用户解压

su - grid
cd $ORACLE_HOME
unzip LINUX.X64_193000_grid_home.zip

等待解压完毕

配置DISPLAY变量
```
export DISPLAY=192.168.100.103:0.0
./gridSetup.sh
```
注：IP写自己宿主机的IP地址
安装过程

这里的SCAN NAME一定要和你/etc/hosts文件里的那个RAC-SCAN-IP的名称保持一致而不是和IP保持一致。

点击Add

如果密码设置过于简单，会警告密码设置过于简单，点击Yes,继续

是否注册EMCC，不使用，不配置

有两个检查状态是失败的，主要是由于没有使用到DNS服务，所以报错，可以忽略。

点击“Yes”

注：以root用户，按rac1,rac2的顺序先后执行这两个脚本,例如orainstRoot在rac1执行完毕后，然后在rac2执行

[root@rac1 ~]# /u01/app/oraInventory/orainstRoot.sh
Changing permissions of /u01/app/oraInventory.
Adding read,write permissions for group.
Removing read,write,execute permissions for world.

Changing groupname of /u01/app/oraInventory to oinstall.
The execution of the script is complete.
[root@rac1 ~]# /u01/app/19c/grid/root.sh
Performing root user operation.

The following environment variables are set as:
    ORACLE_OWNER= grid
    ORACLE_HOME=  /u01/app/19c/grid

Enter the full pathname of the local bin directory: [/usr/local/bin]:
   Copying dbhome to /usr/local/bin ...
   Copying oraenv to /usr/local/bin ...
   Copying coraenv to /usr/local/bin ...


Creating /etc/oratab file...
\Entries will be added to the /etc/oratab file as needed by
Database Configuration Assistant when a database is created
Finished running generic part of root script.
Now product-specific root actions will be performed.
Relinking oracle with rac_on option
Using configuration parameter file: /u01/app/19c/grid/crs/install/crsconfig_params
The log of current session can be found at:
  /u01/app/grid/crsdata/rac1/crsconfig/rootcrs_rac1_2022-04-22_10-50-07PM.log
2022/04/22 22:50:30 CLSRSC-594: Executing installation step 1 of 19: 'SetupTFA'.
2022/04/22 22:50:31 CLSRSC-594: Executing installation step 2 of 19: 'ValidateEnv'.
2022/04/22 22:50:31 CLSRSC-363: User ignored prerequisites during installation
2022/04/22 22:50:31 CLSRSC-594: Executing installation step 3 of 19: 'CheckFirstNode'.
2022/04/22 22:50:34 CLSRSC-594: Executing installation step 4 of 19: 'GenSiteGUIDs'.
2022/04/22 22:50:35 CLSRSC-594: Executing installation step 5 of 19: 'SetupOSD'.
2022/04/22 22:50:35 CLSRSC-594: Executing installation step 6 of 19: 'CheckCRSConfig'.
2022/04/22 22:50:35 CLSRSC-594: Executing installation step 7 of 19: 'SetupLocalGPNP'.
2022/04/22 22:51:14 CLSRSC-594: Executing installation step 8 of 19: 'CreateRootCert'.
2022/04/22 22:51:19 CLSRSC-594: Executing installation step 9 of 19: 'ConfigOLR'.
2022/04/22 22:51:31 CLSRSC-594: Executing installation step 10 of 19: 'ConfigCHMOS'.
2022/04/22 22:51:31 CLSRSC-594: Executing installation step 11 of 19: 'CreateOHASD'.
2022/04/22 22:52:01 CLSRSC-594: Executing installation step 12 of 19: 'ConfigOHASD'.
2022/04/22 22:52:13 CLSRSC-330: Adding Clusterware entries to file 'oracle-ohasd.service'
2022/04/22 22:52:17 CLSRSC-4002: Successfully installed Oracle Trace File Analyzer (TFA) Collector.
2022/04/22 22:53:09 CLSRSC-594: Executing installation step 13 of 19: 'InstallAFD'.
2022/04/22 22:53:13 CLSRSC-594: Executing installation step 14 of 19: 'InstallACFS'.
2022/04/22 22:53:18 CLSRSC-594: Executing installation step 15 of 19: 'InstallKA'.
2022/04/22 22:53:23 CLSRSC-594: Executing installation step 16 of 19: 'InitConfig'.

ASM has been created and started successfully.

[DBT-30001] Disk groups created successfully. Check /u01/app/grid/cfgtoollogs/asmca/asmca-220422PM105407.log for details.

2022/04/22 22:55:46 CLSRSC-482: Running command: '/u01/app/19c/grid/bin/ocrconfig -upgrade grid oinstall'
CRS-4256: Updating the profile
Successful addition of voting disk b1f361bac9144f9cbfa05a20dc3e1a67.
Successfully replaced voting disk group with +CSDG.
CRS-4256: Updating the profile
CRS-4266: Voting file(s) successfully replaced
##  STATE    File Universal Id                File Name Disk group
--  -----    -----------------                --------- ---------
 1. ONLINE   b1f361bac9144f9cbfa05a20dc3e1a67 (/dev/sde) [CSDG]
Located 1 voting disk(s).
2022/04/22 22:57:46 CLSRSC-594: Executing installation step 17 of 19: 'StartCluster'.
2022/04/22 22:59:37 CLSRSC-343: Successfully started Oracle Clusterware stack
2022/04/22 22:59:38 CLSRSC-594: Executing installation step 18 of 19: 'ConfigNode'.
2022/04/22 23:02:49 CLSRSC-594: Executing installation step 19 of 19: 'PostConfig'.
2022/04/22 23:04:30 CLSRSC-325: Configure Oracle Grid Infrastructure for a Cluster ... succeeded
[root@rac1 ~]#

点击“OK”

报错，主要还是DNS问题，因为我们不使用DNS，所以可以忽略，点击OK

点击“next”，安装完毕

点击“Yes”

点击“close”,安装完毕

查看集群状态

[grid@rac1:/home/grid]$crsctl stat res -t
--------------------------------------------------------------------------------
Name           Target  State        Server                   State details
--------------------------------------------------------------------------------
Local Resources
--------------------------------------------------------------------------------
ora.LISTENER.lsnr
               ONLINE  ONLINE       rac1                     STABLE
               ONLINE  ONLINE       rac2                     STABLE
ora.chad
               ONLINE  ONLINE       rac1                     STABLE
               ONLINE  ONLINE       rac2                     STABLE
ora.net1.network
               ONLINE  ONLINE       rac1                     STABLE
               ONLINE  ONLINE       rac2                     STABLE
ora.ons
               ONLINE  ONLINE       rac1                     STABLE
               ONLINE  ONLINE       rac2                     STABLE
--------------------------------------------------------------------------------
Cluster Resources
--------------------------------------------------------------------------------
ora.ASMNET1LSNR_ASM.lsnr(ora.asmgroup)
      1        ONLINE  ONLINE       rac1                     STABLE
      2        ONLINE  ONLINE       rac2                     STABLE
      3        OFFLINE OFFLINE                               STABLE
ora.CSDG.dg(ora.asmgroup)
      1        ONLINE  ONLINE       rac1                     STABLE
      2        ONLINE  ONLINE       rac2                     STABLE
      3        OFFLINE OFFLINE                               STABLE
ora.LISTENER_SCAN1.lsnr
      1        ONLINE  ONLINE       rac1                     STABLE
ora.asm(ora.asmgroup)
      1        ONLINE  ONLINE       rac1                     Started,STABLE
      2        ONLINE  ONLINE       rac2                     Started,STABLE
      3        OFFLINE OFFLINE                               STABLE
ora.asmnet1.asmnetwork(ora.asmgroup)
      1        ONLINE  ONLINE       rac1                     STABLE
      2        ONLINE  ONLINE       rac2                     STABLE
      3        OFFLINE OFFLINE                               STABLE
ora.cvu
      1        ONLINE  ONLINE       rac1                     STABLE
ora.qosmserver
      1        ONLINE  ONLINE       rac1                     STABLE
ora.rac1.vip
      1        ONLINE  ONLINE       rac1                     STABLE
ora.rac2.vip
      1        ONLINE  ONLINE       rac2                     STABLE
ora.scan1.vip
      1        ONLINE  ONLINE       rac1                     STABLE
--------------------------------------------------------------------------------

查看rac1的IP地址

[grid@rac1:/home/grid]$ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 00:0c:29:6c:2b:40 brd ff:ff:ff:ff:ff:ff
    inet 192.168.100.101/24 brd 192.168.100.255 scope global noprefixroute ens33
       valid_lft forever preferred_lft forever
    inet 192.168.100.200/24 brd 192.168.100.255 scope global secondary ens33:1
       valid_lft forever preferred_lft forever
    inet 192.168.100.201/24 brd 192.168.100.255 scope global secondary ens33:2
       valid_lft forever preferred_lft forever
    inet6 fe80::effb:10f8:9580:34e/64 scope link noprefixroute
       valid_lft forever preferred_lft forever
3: ens36: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 00:0c:29:6c:2b:4a brd ff:ff:ff:ff:ff:ff
    inet 10.10.10.101/24 brd 10.10.10.255 scope global noprefixroute ens36
       valid_lft forever preferred_lft forever
    inet 169.254.6.205/19 brd 169.254.31.255 scope global ens36:1
       valid_lft forever preferred_lft forever
    inet6 fe80::e654:5dde:a383:d4cf/64 scope link noprefixroute
       valid_lft forever preferred_lft forever
4: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
    link/ether 52:54:00:04:9d:96 brd ff:ff:ff:ff:ff:ff
    inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
       valid_lft forever preferred_lft forever
5: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state DOWN group default qlen 1000
    link/ether 52:54:00:04:9d:96 brd ff:ff:ff:ff:ff:ff

3.数据库安装（RAC1）

3.1上传安装包

以root用户上传LINUX.X64_193000_db_home.zip到/u01/app/oracle/product/19c/db_1下

更改所属用户，所属组

[root@rac1 ~]# cd /u01/app/oracle/product/19c/db_1
[root@rac1 db_1]# chown -R oracle:oinstall LINUX.X64_193000_db_home.zip

3.2 解压缩

切换用户

[root@rac1 db_1]# su - oracle
Last login: Tue Apr 19 09:24:47 CST 2022 on pts/0

切换目录

[oracle@rac1:/home/oracle]$cd $ORACLE_HOME
[oracle@rac1:/u01/app/oracle/product/19c/db_1]$cd /u01/app/oracle/product/19c/db_1

解压
```
unzip LINUX.X64_193000_db_home.zip
```

3.3 安装数据库

设置DISPLAY变量

[oracle@rac1:/u01/app/oracle/product/19c/db_1] export DISPLAY=192.168.100.66:0.0

运行安装程序

[oracle@rac1:/u01/app/oracle/product/19c/db_1] ./runInstaller

注：

1.要投影安装界面的主机（192.168.100.66）的防火墙要关闭，否则会报类似以下错误，

2.如果使用Xshell连接的服务器或者虚拟机的话，投影的机器或者宿主机要安装xMananger。

[oracle@rac1:/u01/app/oracle/product/19c/db_1]$./runInstaller
ERROR: Unable to verify the graphical display setup. This application requires X display. Make sure that xdpyinfo exist under PATH variable.

Can't connect to X11 window server using '192.168.100.66:0.0' as the value of the DISPLAY variable.

安装过程

注：只安装数据库软件，安装数据库软件成功后，再创建实例。

主要是DNS的问题，直接忽略即可。

点击“Yes”

分别以root用户在rac1和rac2上运行该脚本

点击“Close”，安装完成

4.建库(RAC1)

4.1 调取安装界面

切换到grid用户，调取安装界面创建数据库

[root@rac1 ~]# su - grid
Last login: Thu Apr 28 20:19:54 CST 2022
[grid@rac1:/home/grid]$export DISPLAY=192.168.100.66:0.0
[grid@rac1:/home/grid]$asmca

4.2 创建ASM的DG

关闭对话框

4.2 创建数据库

切换到oracle用户并调用安装界面

[grid@rac1:/home/grid]$su - oracle
Password:
Last login: Mon Apr 25 21:42:45 CST 2022
[oracle@rac1:/home/oracle]$export DISPLAY=192.168.100.66:0.0
[oracle@rac1:/home/oracle]$dbca