ksar、sar及相关内核知识点解析【转】
作者：互联网
转自：https://www.cnblogs.com/arnoldlu/p/10040802.html
关键词：sar、sadc、ksar、/proc/stat、/proc/cpuinfo、/proc/meminfo、/proc/diskstats。
在之前有简单介绍过sar/ksar，最近在使用中感觉需要再深入了解一下。
ksar/sar从内核采集数据，并输出可读性数据。分析相关源码，有助于知道数据来龙去脉。--------------------------------------1. sar源码概览
ksar显示sar/sadc获取的数据，并图形化显示。数据从内核节点，到sadc/sar转换，再到ksar显示。----------------------------2. ksar处理流程
对照ksar每张图表，然后sar/sadc对应的采集转换，再到内核每个数据项含义解析。--------------------------------------------3. ksar解读
期望是从ksar上的图表能对应到内核的代码，明白这些图表数据根源。
1. sar源码概览
sar作为sysstat一部分，相关的工具还包括sadc、sa1、sa2。
sa1负责收集并存储每天系统动态信息到一个二进制的文件中，sa1是sadc所涉及的程序前端程序。通常由计划任务工具cron来调用。打开sa1文件不难看出就是调用sadc今次那个采集数据。
sa2就是调用sar命令，将当日二进制日志文件数据存储到文本文件中。
sadc是系统动态数据收集工具，收集的数据被写入一个二进制文件中，它是sar工具后端。
sar负责解析sadc保存的数据，并显示出来。
当使用sar进行数据统计的时候，通过pstree `pidof sar`，可以看出sar调用了sadc。
sar───sadc
1.1 sadc信息采样
sadc入口在sadc.c中，主要是解析参数、启动一个interval alarm、rw_sa_stat_loop()读取数据。
通过alarm触发SIGALRM实现周期性读取，SIGINT停止读取。
int main(int argc, char **argv)
{
int opt = 0;
char ofile[MAX_FILE_LEN], sa_dir[MAX_FILE_LEN];
int stdfd = 0, ofd = -1;
int restart_mark;
long count = 0;
/* Get HZ */
get_HZ();
/* Compute page shift in kB */
get_kb_shift();
ofile[0] = sa_dir[0] = comment[0] = '\0';
...-----------------------------------------------------------解析参数并进行配置。
/* Set a handler for SIGALRM */
memset(&alrm_act, 0, sizeof(alrm_act));
alrm_act.sa_handler = alarm_handler;
sigaction(SIGALRM, &alrm_act, NULL);
alarm(interval);------------------------------------------启动一个alarm，超时未interval，并通过在alarm_handler()中重新起一个alarm实现周期性处理。
/* Main loop */
rw_sa_stat_loop(count, stdfd, ofd, ofile, sa_dir);
#ifdef HAVE_SENSORS
/* Cleanup sensors */
sensors_cleanup();
#endif /* HAVE_SENSORS */
/* Free structures */
sa_sys_free();
return 0;
}
rw_sa_stat_loop()是整个sadc的核心循环，这里从个sysfs读取信息，并提取关键信息，然后保存。
void rw_sa_stat_loop(long count, int stdfd, int ofd, char ofile[], char sa_dir[]) { int do_sa_rotat = 0; unsigned int save_flags; char new_ofile[MAX_FILE_LEN] = ""; struct tm rectime = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, NULL}; /* Set a handler for SIGINT */ memset(&int_act, 0, sizeof(int_act)); int_act.sa_handler = int_handler; sigaction(SIGINT, &int_act, NULL); /* Main loop */ do { reset_stats(); ... /* Read then write stats */ read_stats();--------------------------------------------------------遍历act[]中所有的struct activity，进行采样。 if (stdfd >= 0) { save_flags = flags; flags &= ~S_F_LOCK_FILE; write_stats(stdfd);----------------------------------------------通过标准输出文件打印信息。 flags = save_flags; } /* If the record type was R_LAST_STATS, tag it R_STATS before writing it */ record_hdr.record_type = R_STATS; if (ofile[0]) { write_stats(ofd);------------------------------------------------将结果写到指定文件中。 } ... fflush(stdout); if (count > 0) { count--; } if (count) { /* Wait for a signal (probably SIGALRM or SIGINT) */ pause();----------------------------------------------------------此处和alarm()配合达到周期性采样的效果。 } if (sigint_caught)----------------------------------------------------如果收到SIGINT信号，提前终止采样。 /* SIGINT caught: Stop now */ break; ... } while (count);------------------------------------------------------------达到总采样数，同样停止采样。 /* Close file descriptors if they have actually been used */ CLOSE(stdfd); CLOSE(ofd); }
read_stats()是核心采集数据函数，核心数据结构式act[]。
void read_stats(void)
{
int i;
__nr_t cpu_nr = act[get_activity_position(act, A_CPU, EXIT_IF_NOT_FOUND)]->nr;
record_hdr.uptime0 = 0;
if (cpu_nr > 2) {
read_uptime(&(record_hdr.uptime0));
}
for (i = 0; i < NR_ACT; i++) {
if (IS_COLLECTED(act[i]->options)) {---------------------------------------遍历所有act[]，如果act[]中对应的options包含AO_COLLECTED则进行f_read()。
/* Read statistics for current activity */ (*act[i]->f_read)(act[i]);
}
}
if (cpu_nr == 1) {
record_hdr.uptime0 = record_hdr.uptime;
}
}
act[]存放了所有统计事件的struct activity。
struct activity *act[NR_ACT] = { &cpu_act, &pcsw_act, &irq_act, &swap_act, &paging_act, &io_act, &memory_act, &huge_act, &ktables_act, &queue_act, &serial_act, &disk_act, /* <network> */ &net_dev_act, &net_edev_act, &net_nfs_act, &net_nfsd_act, &net_sock_act, &net_ip_act, &net_eip_act, &net_icmp_act, &net_eicmp_act, &net_tcp_act, &net_etcp_act, &net_udp_act, &net_sock6_act, &net_ip6_act, &net_eip6_act, &net_icmp6_act, &net_eicmp6_act, &net_udp6_act, &fchost_act, &softnet_act, /* AO_CLOSE_MARKUP */ /* </network> */ /* <power-management> */ &pwr_cpufreq_act, &pwr_fan_act, &pwr_temp_act, &pwr_in_act, &pwr_wghfreq_act, &pwr_usb_act, /* AO_CLOSE_MARKUP */ /* </power-management> */ &filesystem_act };
1.2 sar显示统计信息
read_sadc_stat_bunch()读取统计信息，write_stats()调用每个struct activity的f_print()函数，write_stats_avg()调用每个struct activity的f_print_avg()函数。
f_print()和f_print_avg()或从文件中解析字符串，或启动sadc采样，然后再解析。
2 ksar处理流程
2.1 ksar介绍
ksar资源：ksar安装文件。
ksar中看到的图标是结果，这些数据是通过sadc采集，sar解析出来的。
sadc是通过读取sysfs/procfs节点来获取信息，这些节点都是内核提供的统计信息。
sar -o temp.bin 1 600--------------------------------------------------sar将采样数据保存在temp.bin中。
LC_ALL=C sar -A -f temp.bin > sar.txt----------------------------将保存的采样数据temp.bin，转换成更可读性强的文本文件。
所以ksar的每一张图标，都对应了内核统计信息。
sar是数据搬运整理工具，ksar是图形化工具。
下面对每张图标从ksar，到sar/sadc，最终到内核中每个数据。
2.2 ksar操作
2.2.1 数据导入
通过Data->Append from a file...从txt中加载数据，还有其他两种数据来源方式。
2.2.2 数据导出
如果要将图表导出，可以在每张图标下面选择Export PNG之类。
或者通过Export->Export to PDF...，选择指定选项。
3. ksar解析
下面结合ksar图表来逐项解析。
3.1 CPU信息
cpu_act读取/proc/stat节点，解析其中cpu信息，包括合计cpu信息以及单个cpu信息。
/proc/stat中的信息包括一个合计以及多个cpu单独统计信息。
从/proc/stat中读取的信息都是从启动以来的累计时间，在图标中显示的是一个时间段的差值。
然后计算不同模块耗时占比。
void read_stat_cpu(struct stats_cpu *st_cpu, int nbr,
unsigned long long *uptime, unsigned long long *uptime0)
{
FILE *fp;
struct stats_cpu *st_cpu_i;
struct stats_cpu sc;
char line[8192];
int proc_nb;
if ((fp = fopen(STAT, "r")) == NULL) {----------------------------------------------------/proc/stat
fprintf(stderr, _("Cannot open %s: %s\n"), STAT, strerror(errno));
exit(2);
}
while (fgets(line, sizeof(line), fp) != NULL) {
if (!strncmp(line, "cpu ", 4)) {------------------------------------------------------统计总cpu不同类别耗时，详细信息参考/proc/stat。这里的信息和内核中一一对应。
memset(st_cpu, 0, STATS_CPU_SIZE);
sscanf(line + 5, "%llu %llu %llu %llu %llu %llu %llu %llu %llu %llu",
&st_cpu->cpu_user,
&st_cpu->cpu_nice,
&st_cpu->cpu_sys,
&st_cpu->cpu_idle,
&st_cpu->cpu_iowait,
&st_cpu->cpu_hardirq,
&st_cpu->cpu_softirq,
&st_cpu->cpu_steal,
&st_cpu->cpu_guest,
&st_cpu->cpu_guest_nice);
*uptime = st_cpu->cpu_user + st_cpu->cpu_nice +
st_cpu->cpu_sys + st_cpu->cpu_idle +
st_cpu->cpu_iowait + st_cpu->cpu_hardirq +
st_cpu->cpu_steal + st_cpu->cpu_softirq;
}
else if (!strncmp(line, "cpu", 3)) {
...
}
fclose(fp);
}
3.2 进程创建及切换
pcsw_act读取/proc/stat节点，解析其中的ctxt和processes信息。
同样的/proc/stat中，统计信息是启动以来的累计值，图标中现实的不同时间段的差值。
proc/s表示每秒创建的进程数目，cswch/s表示每秒进程切换次数。
void read_stat_pcsw(struct stats_pcsw *st_pcsw)
{
FILE *fp;
char line[8192];
if ((fp = fopen(STAT, "r")) == NULL)
return;
while (fgets(line, sizeof(line), fp) != NULL) {
if (!strncmp(line, "ctxt ", 5)) {--------------------------------------------ctxt是所有CPU的进程切换次数。
/* Read number of context switches */
sscanf(line + 5, "%llu", &st_pcsw->context_switch);
}
else if (!strncmp(line, "processes ", 10)) {---------------------------------是整个系统创建进程的次数，total_forks，
/* Read number of processes created since system boot */
sscanf(line + 10, "%lu", &st_pcsw->processes);
}
}
fclose(fp);
}
3.3 swap信息
swap_act读取/proc/vmstat节点，解析其中的pswpin和pswpout两个信息。
pswpin/s表示系统每秒从swap分区读入的页面数量，即移除掉swap；pswpout/s表示系统每秒写到swap分区的页面数量，即产生swap。
void read_vmstat_swap(struct stats_swap *st_swap)
{
FILE *fp;
char line[128];
if ((fp = fopen(VMSTAT, "r")) == NULL)
return;
while (fgets(line, sizeof(line), fp) != NULL) {
if (!strncmp(line, "pswpin ", 7)) {-------------------------------对应PSWPIN，表示从swap分区读入页面。
/* Read number of swap pages brought in */
sscanf(line + 7, "%lu", &st_swap->pswpin);
}
else if (!strncmp(line, "pswpout ", 8)) {-------------------------对应PSWPOUT，表示将page写入到swap分区。
/* Read number of swap pages brought out */
sscanf(line + 8, "%lu", &st_swap->pswpout);
}
}
fclose(fp);
}
3.4 页面统计信息
paging_act统计/proc/vmstat中页面交换统计信息。
Paging包括四张图标，分别统计/proc/vmstat中的PGPGIN、PGPGOUT、PGFAULT、PGMAJFAULT等等信息。
pgpgin/s表示系统每秒从磁盘中paged多少KB；pgpgout/s则表示到磁盘中多少KB。
fault/s表示系统每秒产生的页面异常数目，包括major和minor；majflt/s则表示页面异常是从磁盘中产生的。
pgfree/s表示每秒放入到free list的页面数量；pgscank/s、pgscand/s都表示扫描的页面数量，只不过前者表示kswapd扫描结果，后者表示直接扫描；pgsteal/s都表示从pagecache和swapcache中回收的页面数量。
%vmeff是pgsteal/pgscan表示页面回收的效率。
看fault/s和pgfree/s存在一定关系，前者表示内存申请，后者表示内存释放，存在先后关系。但是单位不一致，前者是次数，后者是页面。
void read_vmstat_paging(struct stats_paging *st_paging)
{
FILE *fp;
char line[128];
unsigned long pgtmp;
if ((fp = fopen(VMSTAT, "r")) == NULL)
return;
st_paging->pgsteal = 0;
st_paging->pgscan_kswapd = st_paging->pgscan_direct = 0;
while (fgets(line, sizeof(line), fp) != NULL) {
if (!strncmp(line, "pgpgin ", 7)) {------------------------------------------------pgpgin和pgpgout分别对应PGPGIN和PGPGOUT，在submit_io()中更新。指内存和块设备志坚page数目，这里的page指的是disk sector。pgpgin表示从块设备读入，pgpgout写入到跨设备。
/* Read number of pages the system paged in */
sscanf(line + 7, "%lu", &st_paging->pgpgin);
}
else if (!strncmp(line, "pgpgout ", 8)) {
/* Read number of pages the system paged out */
sscanf(line + 8, "%lu", &st_paging->pgpgout);
}
else if (!strncmp(line, "pgfault ", 8)) {-------------------------------------------在vm_event_item[]中对应PGFAULT，在handle_mm_fault()中更新。统计产生page fault的信息。
/* Read number of faults (major+minor) made by the system */
sscanf(line + 8, "%lu", &st_paging->pgfault);
}
else if (!strncmp(line, "pgmajfault ", 11)) {---------------------------------------对应PGMAJFAULT，表示从磁盘而不是从内存中获取数据。
/* Read number of faults (major only) made by the system */
sscanf(line + 11, "%lu", &st_paging->pgmajfault);
}
else if (!strncmp(line, "pgfree ", 7)) {--------------------------------------------对应PGFREE，统计释放的页面次数。
/* Read number of pages freed by the system */
sscanf(line + 7, "%lu", &st_paging->pgfree);
}
else if (!strncmp(line, "pgsteal_", 8)) {-------------------------------------------统计PGSTEAL_KSWAPD和PGSTEAL_DIRECT信息，表示系统回收的kswapd和直接回收的页面数目。
/* Read number of pages stolen by the system */
sscanf(strchr(line, ' '), "%lu", &pgtmp);
st_paging->pgsteal += pgtmp;
}
else if (!strncmp(line, "pgscan_kswapd", 13)) {--------------------------------------统计PGSCAN_KSWAPD信息，表示从系统启动到现在kswapd后台进程扫描的页面数。
/* Read number of pages scanned by the kswapd daemon */
sscanf(strchr(line, ' '), "%lu", &pgtmp);
st_paging->pgscan_kswapd += pgtmp;
}
else if (!strncmp(line, "pgscan_direct", 13)) {--------------------------------------统计PGSCAN_DIRECT和PGSCAN_DIRECT_THROTTLE，统计世界回收页面数。
/* Read number of pages scanned directly */
sscanf(strchr(line, ' '), "%lu", &pgtmp);
st_paging->pgscan_direct += pgtmp;
}
}
fclose(fp);
}
3.5 IO统计信息
io_act从/proc/diskstats读取IO统计信息。
上面的tps、rtps、wtps、bread/s、bwrtn/s分别对应采样结果dk_drive、dk_drive_rio、dk_drive_wio、dk_drive_rblk、dk_drive_wblk。
其中tps为rtps和wtps之和，表示完成读写次数；bread/s和bwrtn/s表示读、写扇区数目。
这5个参数都来源于diskstats_show()函数。
void read_diskstats_io(struct stats_io *st_io)
{
FILE *fp;
char line[256];
char dev_name[MAX_NAME_LEN];
unsigned int major, minor;
unsigned long rd_ios, wr_ios, rd_sec, wr_sec;
if ((fp = fopen(DISKSTATS, "r")) == NULL)
return;
while (fgets(line, sizeof(line), fp) != NULL) {
if (sscanf(line, "%u %u %s %lu %*u %lu %*u %lu %*u %lu",-----------scanf的%u之间的星号，表示跳过此输入。
&major, &minor, dev_name,
&rd_ios, &rd_sec, &wr_ios, &wr_sec) == 7) {
if (is_device(dev_name, IGNORE_VIRTUAL_DEVICES)) {--------------虚拟设备没有/sys/block/<device>/device，此特性用以判断dev_name对应的设备是否是真实的块设备。
st_io->dk_drive += (unsigned long long) rd_ios + (unsigned long long) wr_ios;
st_io->dk_drive_rio += rd_ios;
st_io->dk_drive_rblk += rd_sec;
st_io->dk_drive_wio += wr_ios;
st_io->dk_drive_wblk += wr_sec;
}
}
}
fclose(fp);
}
/proc/diskstats来源于内核的diskstats_show()
static int diskstats_show(struct seq_file *seqf, void *v) { struct gendisk *gp = v; struct disk_part_iter piter; struct hd_struct *hd; char buf[BDEVNAME_SIZE]; int cpu; /* if (&disk_to_dev(gp)->kobj.entry == block_class.devices.next) seq_puts(seqf, "major minor name" " rio rmerge rsect ruse wio wmerge " "wsect wuse running use aveq" "\n\n"); */ disk_part_iter_init(&piter, gp, DISK_PITER_INCL_EMPTY_PART0); while ((hd = disk_part_iter_next(&piter))) { cpu = part_stat_lock(); part_round_stats(cpu, hd); part_stat_unlock(); seq_printf(seqf, "%4d %7d %s %lu %lu %lu " "%u %lu %lu %lu %u %u %u %u\n", MAJOR(part_devt(hd)), MINOR(part_devt(hd)), disk_name(gp, hd->partno, buf), part_stat_read(hd, ios[READ]),-------------------------------------------------成功完成读的次数。 part_stat_read(hd, merges[READ]),----------------------------------------------合并读次数，为了效率可能会合并相邻的读和写。 part_stat_read(hd, sectors[READ]),---------------------------------------------读扇区的次数。 jiffies_to_msecs(part_stat_read(hd, ticks[READ])),-----------------------------读花的时间，这里是所有读操作所花费的毫秒数。 part_stat_read(hd, ios[WRITE]),------------------------------------------------成功完成写的次数。 part_stat_read(hd, merges[WRITE]),---------------------------------------------合并写次数。 part_stat_read(hd, sectors[WRITE]),--------------------------------------------写扇区次数。 jiffies_to_msecs(part_stat_read(hd, ticks[WRITE])),----------------------------写花的时间。 part_in_flight(hd), jiffies_to_msecs(part_stat_read(hd, io_ticks)), jiffies_to_msecs(part_stat_read(hd, time_in_queue)) ); } disk_part_iter_exit(&piter); return 0; }
3.6 内存及swap统计信息
memory_act统计/proc/meminfo的内存和swap信息。
kbmemfree是所有free内存大小，kbavail是扣除保留内存，加上部分pagecache和可回收内存；kbmemused是目前系统内存使用量，不包括内核使用量。
%memused是内存使用占总内存百分比。
kbcommit是当前场景系统需要使用到的内存量，实际上可能并没有申请这么多内存。这是因为分配的内存只有在使用到时，才会产生缺页异常。
这里的kbcommit和页面统计信息相呼应，此处kbcommit突然增加，产生了很多page fault。
从图表中的名称大概就能找到对应的/proc/meminfo中的字符项。
其中%memused和%commit查看stub_print_memory_stats()，%memused为(MemTotal-MemFree)/MemTotal。
%commit为Commited_AS/(MemTotal+SwapTotal)。
在/proc/meminfo中看到的CommitLimit可能是proc/sys/vm/overcommit_kbytes；或者按照当前可以用内存乘以overcommit_ratio这个比例得到。
在实际使用中，还需要结合overcommit_memory类型来看，参考overcommit_memory和overcommit_ratio。
unsigned long vm_commit_limit(void)
{
unsigned long allowed;
if (sysctl_overcommit_kbytes)
allowed = sysctl_overcommit_kbytes >> (PAGE_SHIFT - 10);
else
allowed = ((totalram_pages - hugetlb_total_pages())
* sysctl_overcommit_ratio / 100);
allowed += total_swap_pages;
return allowed;
}
read_meminfo()从/proc/meminfo中解析数据。
void read_meminfo(struct stats_memory *st_memory)
{
FILE *fp;
char line[128];
if ((fp = fopen(MEMINFO, "r")) == NULL)
return;
while (fgets(line, sizeof(line), fp) != NULL) {
if (!strncmp(line, "MemTotal:", 9)) {
/* Read the total amount of memory in kB */
sscanf(line + 9, "%lu", &st_memory->tlmkb);
}
else if (!strncmp(line, "MemFree:", 8)) {
/* Read the amount of free memory in kB */
sscanf(line + 8, "%lu", &st_memory->frmkb);
}
else if (!strncmp(line, "MemAvailable:", 13)) {
/* Read the amount of available memory in kB */
sscanf(line + 13, "%lu", &st_memory->availablekb);
}
else if (!strncmp(line, "Buffers:", 8)) {
/* Read the amount of buffered memory in kB */
sscanf(line + 8, "%lu", &st_memory->bufkb);
}
else if (!strncmp(line, "Cached:", 7)) {
/* Read the amount of cached memory in kB */
sscanf(line + 7, "%lu", &st_memory->camkb);
}
else if (!strncmp(line, "SwapCached:", 11)) {
/* Read the amount of cached swap in kB */
sscanf(line + 11, "%lu", &st_memory->caskb);
}
else if (!strncmp(line, "Active:", 7)) {
/* Read the amount of active memory in kB */
sscanf(line + 7, "%lu", &st_memory->activekb);
}
else if (!strncmp(line, "Inactive:", 9)) {
/* Read the amount of inactive memory in kB */
sscanf(line + 9, "%lu", &st_memory->inactkb);
}
else if (!strncmp(line, "SwapTotal:", 10)) {
/* Read the total amount of swap memory in kB */
sscanf(line + 10, "%lu", &st_memory->tlskb);
}
else if (!strncmp(line, "SwapFree:", 9)) {
/* Read the amount of free swap memory in kB */
sscanf(line + 9, "%lu", &st_memory->frskb);
}
else if (!strncmp(line, "Dirty:", 6)) {
/* Read the amount of dirty memory in kB */
sscanf(line + 6, "%lu", &st_memory->dirtykb);
}
else if (!strncmp(line, "Committed_AS:", 13)) {
/* Read the amount of commited memory in kB */
sscanf(line + 13, "%lu", &st_memory->comkb);
}
else if (!strncmp(line, "AnonPages:", 10)) {
/* Read the amount of pages mapped into userspace page tables in kB */
sscanf(line + 10, "%lu", &st_memory->anonpgkb);
}
else if (!strncmp(line, "Slab:", 5)) {
/* Read the amount of in-kernel data structures cache in kB */
sscanf(line + 5, "%lu", &st_memory->slabkb);
}
else if (!strncmp(line, "KernelStack:", 12)) {
/* Read the kernel stack utilization in kB */
sscanf(line + 12, "%lu", &st_memory->kstackkb);
}
else if (!strncmp(line, "PageTables:", 11)) {
/* Read the amount of memory dedicated to the lowest level of page tables in kB */
sscanf(line + 11, "%lu", &st_memory->pgtblkb);
}
else if (!strncmp(line, "VmallocUsed:", 12)) {
/* Read the amount of vmalloc area which is used in kB */
sscanf(line + 12, "%lu", &st_memory->vmusedkb);
}
}
fclose(fp);
}
下图的kbswpfree、kbswpused、kbswpcad通过字面意思即可知其对应的meminfo项为SwapFree、SwapTotal-SwapFree、SwapCached。
3.7 中断统计信息
中断你统计信息同样来自/proc/stat，解析intr字段。第一个是启动以来所有中断触发次数，后面是单个中断触发次数。
生成的表格中包含了对应的图标sum，以及每个中断统计信息。
void read_stat_irq(struct stats_irq *st_irq, int nbr)
{
FILE *fp;
struct stats_irq *st_irq_i;
char line[8192];
int i, pos;
if ((fp = fopen(STAT, "r")) == NULL)
return;
while (fgets(line, sizeof(line), fp) != NULL) {
if (!strncmp(line, "intr ", 5)) {-------------------------------------------------/proc/stat的intr字段。
/* Read total number of interrupts received since system boot */
sscanf(line + 5, "%llu", &st_irq->irq_nr);
pos = strcspn(line + 5, " ") + 5;
for (i = 1; i < nbr; i++) {
st_irq_i = st_irq + i;
sscanf(line + pos, " %llu", &st_irq_i->irq_nr);
pos += strcspn(line + pos + 1, " ") + 1;
}
}
}
fclose(fp);
}
3.8
ktables_act
#define FDENTRY_STATE "/proc/sys/fs/dentry-state"
#define FFILE_NR "/proc/sys/fs/file-nr"
#define FINODE_STATE "/proc/sys/fs/inode-state"
#define PTY_NR "/proc/sys/kernel/pty/nr"
void read_kernel_tables(struct stats_ktables *st_ktables)
{
FILE *fp;
unsigned int parm;
int rc = 0;
/* Open /proc/sys/fs/dentry-state file */
if ((fp = fopen(FDENTRY_STATE, "r")) != NULL) {
rc = fscanf(fp, "%*d %u",
&st_ktables->dentry_stat);
fclose(fp);
if (rc == 0) {
st_ktables->dentry_stat = 0;
}
}
/* Open /proc/sys/fs/file-nr file */
if ((fp = fopen(FFILE_NR, "r")) != NULL) {
rc = fscanf(fp, "%u %u",
&st_ktables->file_used, &parm);
fclose(fp);
/*
* The number of used handles is the number of allocated ones
* minus the number of free ones.
*/
if (rc == 2) {
st_ktables->file_used -= parm;
}
else {
st_ktables->file_used = 0;
}
}
/* Open /proc/sys/fs/inode-state file */
if ((fp = fopen(FINODE_STATE, "r")) != NULL) {
rc = fscanf(fp, "%u %u",
&st_ktables->inode_used, &parm);
fclose(fp);
/*
* The number of inuse inodes is the number of allocated ones
* minus the number of free ones.
*/
if (rc == 2) {
st_ktables->inode_used -= parm;
}
else {
st_ktables->inode_used = 0;
}
}
/* Open /proc/sys/kernel/pty/nr file */
if ((fp = fopen(PTY_NR, "r")) != NULL) {
rc = fscanf(fp, "%u",
&st_ktables->pty_nr);
fclose(fp);
if (rc == 0) {
st_ktables->pty_nr = 0;
}
}
}
3.9 load和queue统计信息
queue_act从/proc/loadavg获取load信息，从/proc/stat获取queue统计信息。
ldavg-1、ldavg-5、ldavg-15分别表示1、5、15分钟内进程对立中平均进程数目，包括正在运行的进程和准备好等待运行的进程数目。
runq-sz表示运行队列大小，plist-sz表示所有进程总数nr_threads。
runq-sz大表示等待运行的进程数目较多。
blocked表示处于iowait状态的进程数目。
void read_loadavg(struct stats_queue *st_queue)
{
FILE *fp;
char line[8192];
int load_tmp[3];
int rc;
if ((fp = fopen(LOADAVG, "r")) == NULL)
return;
/* Read load averages and queue length */
rc = fscanf(fp, "%d.%u %d.%u %d.%u %lu/%u %*d\n",------------------------------可以看出从/proc/loadavg中获取信息，然后最后一个数据忽略。
&load_tmp[0], &st_queue->load_avg_1,
&load_tmp[1], &st_queue->load_avg_5,
&load_tmp[2], &st_queue->load_avg_15,
&st_queue->nr_running,
&st_queue->nr_threads);
fclose(fp);
if (rc < 8)
return;
st_queue->load_avg_1 += load_tmp[0] * 100;
st_queue->load_avg_5 += load_tmp[1] * 100;
st_queue->load_avg_15 += load_tmp[2] * 100;
if (st_queue->nr_running) {
/* Do not take current process into account */
st_queue->nr_running--;
}
/* Read nr of tasks blocked from /proc/stat */
if ((fp = fopen(STAT, "r")) == NULL)
return;
while (fgets(line, sizeof(line), fp) != NULL) {
if (!strncmp(line, "procs_blocked ", 14)) {--------------------------------从/proc/stat中获取procs_blocked项，表示处于iowait状态的进程数目。
/* Read number of processes blocked */
sscanf(line + 14, "%lu", &st_queue->procs_blocked);
break;
}
}
fclose(fp);
}
3.10 块设备统计信息
disk_act和io_act一样是从/proc/diskstats中获取统计信息，
图标中的四项tps表示块设备读写次数频率；rkB/s和wkB/s表示块设备读写速率；await表示一次读或写耗时。
tps值大说明此段时间读写较频繁。
await值大表示当前读写耗时较大，可能存在问题。
__print_funct_t print_disk_stats(struct activity *a, int prev, int curr,
unsigned long long itv)
{
...
for (i = 0; i < a->nr; i++) {
...
printf("%-11s", timestamp[curr]);
cprintf_in(IS_STR, " %9s", dev_name, 0);-----------------------------sdc是设备当前统计信息，sdp是设备前一次统计信息，itv是两次时间间隔。
cprintf_f(NO_UNIT, 1, 9, 2,
S_VALUE(sdp->nr_ios, sdc->nr_ios, itv));----------------------对应图标中的tps，nr_ios表示块设备读写次数之和。tps表示块设备读写频率。
cprintf_f(unit, 2, 9, 2,
S_VALUE(sdp->rd_sect, sdc->rd_sect, itv) / 2,
S_VALUE(sdp->wr_sect, sdc->wr_sect, itv) / 2);-----------------对应图标的rkB/s和wkB/s，同样rd_sect和wr_sect可以计算出以KB为单位的读写速率。
/* See iostat for explanations */
cprintf_f(unit, 1, 9, 2,
xds.arqsz / 2);
cprintf_f(NO_UNIT, 3, 9, 2,
S_VALUE(sdp->rq_ticks, sdc->rq_ticks, itv) / 1000.0,
xds.await,------------------------------------------------------对应await，在compute_ext_disk_stats()中计算。表示每次读写平均耗时。
xds.svctm);
cprintf_pc(DISPLAY_UNIT(flags), 1, 9, 2,
xds.util / 10.0);
printf("\n");
}
}
3.11 CPU频率
pwr_cpufreq_act从/proc/cpuinfo中获取频率信息，CPU Frequency all显示的是所有CPU频率的平均值。
从下面代码分析可知，从关键词processor中获取CPU号，从cpu MHz获取CPU频率。
void read_cpuinfo(struct stats_pwr_cpufreq *st_pwr_cpufreq, int nbr)
{
FILE *fp;
struct stats_pwr_cpufreq *st_pwr_cpufreq_i;
char line[1024];
int nr = 0;
unsigned int proc_nb = 0, ifreq, dfreq;
if ((fp = fopen(CPUINFO, "r")) == NULL)
return;
st_pwr_cpufreq->cpufreq = 0;
while (fgets(line, sizeof(line), fp) != NULL) {
if (!strncmp(line, "processor\t", 10)) {
sscanf(strchr(line, ':') + 1, "%u", &proc_nb);
}
/* Entry in /proc/cpuinfo is different between Intel and Power architectures */
else if (!strncmp(line, "cpu MHz\t", 8) ||
!strncmp(line, "clock\t", 6)) {
sscanf(strchr(line, ':') + 1, "%u.%u", &ifreq, &dfreq);
if (proc_nb < (nbr - 1)) {
st_pwr_cpufreq_i = st_pwr_cpufreq + proc_nb + 1;
st_pwr_cpufreq_i->cpufreq = ifreq * 100 + dfreq / 10;
st_pwr_cpufreq->cpufreq += st_pwr_cpufreq_i->cpufreq;
nr++;
}
else if (!proc_nb && (nbr == 1)) {
st_pwr_cpufreq->cpufreq = ifreq * 100 + dfreq / 10;
}
}
}
fclose(fp);
...
}
3.12 统计串口线信息
serial_act从/proc/tty/driver/serial获取串口线统计信息。
void read_tty_driver_serial(struct stats_serial *st_serial, int nbr)
{
FILE *fp;
struct stats_serial *st_serial_i;
int sl = 0;
char line[256];
char *p;
if ((fp = fopen(SERIAL, "r")) == NULL)
return;
while ((fgets(line, sizeof(line), fp) != NULL) && (sl < nbr)) {
if ((p = strstr(line, "tx:")) != NULL) {
st_serial_i = st_serial + sl;
sscanf(line, "%u", &st_serial_i->line);
/*
* A value of 0 means an unused structure.
* So increment it to make sure it is not zero.
*/
(st_serial_i->line)++;
/*
* Read the number of chars transmitted and received by
* current serial line.
*/
sscanf(p + 3, "%u", &st_serial_i->tx);
if ((p = strstr(line, "rx:")) != NULL) {
sscanf(p + 3, "%u", &st_serial_i->rx);
}
if ((p = strstr(line, "fe:")) != NULL) {
sscanf(p + 3, "%u", &st_serial_i->frame);
}
if ((p = strstr(line, "pe:")) != NULL) {
sscanf(p + 3, "%u", &st_serial_i->parity);
}
if ((p = strstr(line, "brk:")) != NULL) {
sscanf(p + 4, "%u", &st_serial_i->brk);
}
if ((p = strstr(line, "oe:")) != NULL) {
sscanf(p + 3, "%u", &st_serial_i->overrun);
}
sl++;
}
}
fclose(fp);
}
3.13 获取网口统计信息
net_dev_act从/proc/net/dev中获取网口的统计信息，从/sys/class/net/xxx/duplex和/sys/class/net/xxx/speed中获取双工和速度信息。
从下面关于/proc/net/dev解释可知，rxpck对应rx_packets，rxpck/s就是每秒接收packet数；txpck/s就是每个发送packet数目。
rxkB/s是每秒接受多少k字节；txkB/s是每秒发送多少k字节。
rxmcst/s表示每秒接收到的multicast packet数目。
%ifutil跟每秒发送接收的KB数有关，还跟全双工，单双工有关，以及设备的速度有关；表示网络设备使用率。
双工信息从/sys/class/net/%s/duplex获取，速度信息从从/sys/class/net/%s/speed获取。
从此图看，网络的使用率并不高，说明网络不频繁。
int read_net_dev(struct stats_net_dev *st_net_dev, int nbr)
{
FILE *fp;
struct stats_net_dev *st_net_dev_i;
char line[256];
char iface[MAX_IFACE_LEN];
int dev = 0;
int pos;
if ((fp = fopen(NET_DEV, "r")) == NULL)----------------------------------------------------------------从/proc/net/dev获取信息。
return 0;
while ((fgets(line, sizeof(line), fp) != NULL) && (dev < nbr)) {
pos = strcspn(line, ":");
if (pos < strlen(line)) {
st_net_dev_i = st_net_dev + dev;
strncpy(iface, line, MINIMUM(pos, MAX_IFACE_LEN - 1));
iface[MINIMUM(pos, MAX_IFACE_LEN - 1)] = '\0';
sscanf(iface, "%s", st_net_dev_i->interface); /* Skip heading spaces */
sscanf(line + pos + 1, "%llu %llu %*u %*u %*u %*u %llu %llu %llu %llu "
"%*u %*u %*u %*u %*u %llu",
&st_net_dev_i->rx_bytes,
&st_net_dev_i->rx_packets,
&st_net_dev_i->rx_compressed,
&st_net_dev_i->multicast,
&st_net_dev_i->tx_bytes,
&st_net_dev_i->tx_packets,
&st_net_dev_i->tx_compressed);
dev++;
}
}
fclose(fp);
return dev;
}
void read_if_info(struct stats_net_dev *st_net_dev, int nbr)
{
FILE *fp;
struct stats_net_dev *st_net_dev_i;
char filename[128], duplex[32];
int dev, n;
for (dev = 0; dev < nbr; dev++) {
st_net_dev_i = st_net_dev + dev;
/* Read speed info */
sprintf(filename, IF_DUPLEX, st_net_dev_i->interface);----------------------------------------------从/sys/class/net/%s/duplex获取信息。
if ((fp = fopen(filename, "r")) == NULL)
/* Cannot read NIC duplex */
continue;
n = fscanf(fp, "%31s", duplex);
fclose(fp);
if (n != 1)
/* Cannot read NIC duplex */
continue;
if (!strcmp(duplex, K_DUPLEX_FULL)) {
st_net_dev_i->duplex = C_DUPLEX_FULL;
}
else if (!strcmp(duplex, K_DUPLEX_HALF)) {
st_net_dev_i->duplex = C_DUPLEX_HALF;
}
else
continue;
/* Read speed info */
sprintf(filename, IF_SPEED, st_net_dev_i->interface);--------------------------------------------------从/sys/class/net/%s/speed获取信息。
if ((fp = fopen(filename, "r")) == NULL)
/* Cannot read NIC speed */
continue;
n = fscanf(fp, "%u", &st_net_dev_i->speed);
fclose(fp);
if (n != 1) {
st_net_dev_i->speed = 0;
}
}
}
3.13.1 /proc/net/dev
/proc/net/dev节点在dev_proc_net_init()中创建，对应的fops是dev_seq_fops。
这里重点看一下dev_seq_show()：
static int dev_seq_show(struct seq_file *seq, void *v)
{
if (v == SEQ_START_TOKEN)
seq_puts(seq, "Inter-| Receive "
" | Transmit\n"
" face |bytes packets errs drop fifo frame "
"compressed multicast|bytes packets errs "
"drop fifo colls carrier compressed\n");
else
dev_seq_printf_stats(seq, v);
return 0;
}
static void dev_seq_printf_stats(struct seq_file *seq, struct net_device *dev)
{
struct rtnl_link_stats64 temp;
const struct rtnl_link_stats64 *stats = dev_get_stats(dev, &temp);
seq_printf(seq, "%6s: %7llu %7llu %4llu %4llu %4llu %5llu %10llu %9llu "
"%8llu %7llu %4llu %4llu %4llu %5llu %7llu %10llu\n",
dev->name, stats->rx_bytes, stats->rx_packets,
stats->rx_errors,
stats->rx_dropped + stats->rx_missed_errors,
stats->rx_fifo_errors,
stats->rx_length_errors + stats->rx_over_errors +
stats->rx_crc_errors + stats->rx_frame_errors,
stats->rx_compressed, stats->multicast,
stats->tx_bytes, stats->tx_packets,
stats->tx_errors, stats->tx_dropped,
stats->tx_fifo_errors, stats->collisions,
stats->tx_carrier_errors +
stats->tx_aborted_errors +
stats->tx_window_errors +
stats->tx_heartbeat_errors,
stats->tx_compressed);
}
3.14 网络错误统计信息
net_edev_act从/proc/net/dev网络错误统计信息。
网络错误信息数据来源和网络信息一样，都来自于/proc/net/dev。
关键结构体也是struct rtnl_link_stats64。
void read_net_edev(struct stats_net_edev *st_net_edev, int nbr)
{
FILE *fp;
struct stats_net_edev *st_net_edev_i;
static char line[256];
char iface[MAX_IFACE_LEN];
int dev = 0;
int pos;
if ((fp = fopen(NET_DEV, "r")) == NULL)
return;
while ((fgets(line, sizeof(line), fp) != NULL) && (dev < nbr)) {
pos = strcspn(line, ":");
if (pos < strlen(line)) {
st_net_edev_i = st_net_edev + dev;
strncpy(iface, line, MINIMUM(pos, MAX_IFACE_LEN - 1));
iface[MINIMUM(pos, MAX_IFACE_LEN - 1)] = '\0';
sscanf(iface, "%s", st_net_edev_i->interface); /* Skip heading spaces */
sscanf(line + pos + 1, "%*u %*u %llu %llu %llu %llu %*u %*u %*u %*u "
"%llu %llu %llu %llu %llu",
&st_net_edev_i->rx_errors,------------------对应rx_erros，表示接受到的bad packet。
&st_net_edev_i->rx_dropped,-----------------对应rx_dropped+rx_missed_errors。
&st_net_edev_i->rx_fifo_errors,-------------对应rx_fifo_errors。
&st_net_edev_i->rx_frame_errors,------------对应rx_length_errors+rx_over_errros。
&st_net_edev_i->tx_errors,
&st_net_edev_i->tx_dropped,
&st_net_edev_i->tx_fifo_errors,
&st_net_edev_i->collisions,-----------------对应collisions
&st_net_edev_i->tx_carrier_errors);---------包括tx_carrier_errors+tx_aborted_errors+tx_window_errors+tx_heartbeat_errors。
dev++;
}
}
fclose(fp);
}
获取网络设备统计信息的核心数据结构式struct rtnl_link_stat64。
struct rtnl_link_stats64 { __u64 rx_packets; /* total packets received */ __u64 tx_packets; /* total packets transmitted */ __u64 rx_bytes; /* total bytes received */ __u64 tx_bytes; /* total bytes transmitted */ __u64 rx_errors; /* bad packets received */ __u64 tx_errors; /* packet transmit problems */ __u64 rx_dropped; /* no space in linux buffers */ __u64 tx_dropped; /* no space available in linux */ __u64 multicast; /* multicast packets received */ __u64 collisions; /* detailed rx_errors: */ __u64 rx_length_errors; __u64 rx_over_errors; /* receiver ring buff overflow */ __u64 rx_crc_errors; /* recved pkt with crc error */ __u64 rx_frame_errors; /* recv'd frame alignment error */ __u64 rx_fifo_errors; /* recv'r fifo overrun */ __u64 rx_missed_errors; /* receiver missed packet */ /* detailed tx_errors */ __u64 tx_aborted_errors; __u64 tx_carrier_errors; __u64 tx_fifo_errors; __u64 tx_heartbeat_errors; __u64 tx_window_errors; /* for cslip etc */ __u64 rx_compressed; __u64 tx_compressed; __u64 rx_nohandler; /* dropped, no handler found */ };
3.15 NFS客户端统计信息
net_nfs_act读取/proc/net/rpc/nfs来分析作为nfs客户端的统计信息。
void read_net_nfs(struct stats_net_nfs *st_net_nfs)
{
FILE *fp;
char line[256];
unsigned int getattcnt = 0, accesscnt = 0, readcnt = 0, writecnt = 0;
if ((fp = fopen(NET_RPC_NFS, "r")) == NULL)
return;
memset(st_net_nfs, 0, STATS_NET_NFS_SIZE);
while (fgets(line, sizeof(line), fp) != NULL) {
if (!strncmp(line, "rpc ", 4)) {
sscanf(line + 4, "%u %u",
&st_net_nfs->nfs_rpccnt, &st_net_nfs->nfs_rpcretrans);
}
else if (!strncmp(line, "proc3 ", 6)) {
sscanf(line + 6, "%*u %*u %u %*u %*u %u %*u %u %u",
&getattcnt, &accesscnt, &readcnt, &writecnt);
st_net_nfs->nfs_getattcnt += getattcnt;
st_net_nfs->nfs_accesscnt += accesscnt;
st_net_nfs->nfs_readcnt += readcnt;
st_net_nfs->nfs_writecnt += writecnt;
}
else if (!strncmp(line, "proc4 ", 6)) {
sscanf(line + 6, "%*u %*u %u %u "
"%*u %*u %*u %*u %*u %*u %*u %*u %*u %*u %*u %*u %*u %*u %u %u",
&readcnt, &writecnt, &accesscnt, &getattcnt);
st_net_nfs->nfs_getattcnt += getattcnt;
st_net_nfs->nfs_accesscnt += accesscnt;
st_net_nfs->nfs_readcnt += readcnt;
st_net_nfs->nfs_writecnt += writecnt;
}
}
fclose(fp);
}
3.16 NFS服务端统计信息
net_nfsd_act
#define NET_RPC_NFSD "/proc/net/rpc/nfsd"
void read_net_nfsd(struct stats_net_nfsd *st_net_nfsd)
{
FILE *fp;
char line[256];
unsigned int getattcnt = 0, accesscnt = 0, readcnt = 0, writecnt = 0;
if ((fp = fopen(NET_RPC_NFSD, "r")) == NULL)
return;
memset(st_net_nfsd, 0, STATS_NET_NFSD_SIZE);
while (fgets(line, sizeof(line), fp) != NULL) {
if (!strncmp(line, "rc ", 3)) {
sscanf(line + 3, "%u %u",
&st_net_nfsd->nfsd_rchits, &st_net_nfsd->nfsd_rcmisses);
}
else if (!strncmp(line, "net ", 4)) {
sscanf(line + 4, "%u %u %u",
&st_net_nfsd->nfsd_netcnt, &st_net_nfsd->nfsd_netudpcnt,
&st_net_nfsd->nfsd_nettcpcnt);
}
else if (!strncmp(line, "rpc ", 4)) {
sscanf(line + 4, "%u %u",
&st_net_nfsd->nfsd_rpccnt, &st_net_nfsd->nfsd_rpcbad);
}
else if (!strncmp(line, "proc3 ", 6)) {
sscanf(line + 6, "%*u %*u %u %*u %*u %u %*u %u %u",
&getattcnt, &accesscnt, &readcnt, &writecnt);
st_net_nfsd->nfsd_getattcnt += getattcnt;
st_net_nfsd->nfsd_accesscnt += accesscnt;
st_net_nfsd->nfsd_readcnt += readcnt;
st_net_nfsd->nfsd_writecnt += writecnt;
}
else if (!strncmp(line, "proc4ops ", 9)) {
sscanf(line + 9, "%*u %*u %*u %*u %u "
"%*u %*u %*u %*u %*u %u "
"%*u %*u %*u %*u %*u %*u %*u %*u %*u %*u %*u %*u %*u %*u %*u %u "
"%*u %*u %*u %*u %*u %*u %*u %*u %*u %*u %*u %*u %u",
&accesscnt, &getattcnt, &readcnt, &writecnt);
st_net_nfsd->nfsd_getattcnt += getattcnt;
st_net_nfsd->nfsd_accesscnt += accesscnt;
st_net_nfsd->nfsd_readcnt += readcnt;
st_net_nfsd->nfsd_writecnt += writecnt;
}
}
fclose(fp);
}
3.17 网络socket统计信息
net_sock_act读取/proc/net/sockstat统计TCP和UDP信息。
/proc/net/sockstat的数据来源于sockstat_seq_show()，这里面统计了当前系统socket的使用情况。
static int sockstat_seq_show(struct seq_file *seq, void *v) { struct net *net = seq->private; unsigned int frag_mem; int orphans, sockets; local_bh_disable(); orphans = percpu_counter_sum_positive(&tcp_orphan_count); sockets = proto_sockets_allocated_sum_positive(&tcp_prot); local_bh_enable(); socket_seq_show(seq);---------------------------------------------------------从sockets_ in_use中获取每个CPU在使用中的socket数目。显示内容sockets: used xxx。tw表示TimeWait的socket数目。 seq_printf(seq, "TCP: inuse %d orphan %d tw %d alloc %d mem %ld\n", sock_prot_inuse_get(net, &tcp_prot), orphans, atomic_read(&tcp_death_row.tw_count), sockets, proto_memory_allocated(&tcp_prot));------------------------------------第一个参数表示TCP协议使用的socket数目。 seq_printf(seq, "UDP: inuse %d mem %ld\n", sock_prot_inuse_get(net, &udp_prot), proto_memory_allocated(&udp_prot));------------------------------------第一个参数表示UDP协议使用的socket数目。 seq_printf(seq, "UDPLITE: inuse %d\n", sock_prot_inuse_get(net, &udplite_prot)); seq_printf(seq, "RAW: inuse %d\n", sock_prot_inuse_get(net, &raw_prot));----------------------------------RAW类型socket使用数目。 frag_mem = ip_frag_mem(net); seq_printf(seq, "FRAG: inuse %u memory %u\n", !!frag_mem, frag_mem); return 0; }
Sockets图表中的数据totsck、tcpsck、udpsck、rawsck、tcp-tw、ip-frag分别来源于read_net_sock()函数解析。
可见totsck表示系统所有Socket数目，其他子类表示不同类型socket数目。
void read_net_sock(struct stats_net_sock *st_net_sock) { FILE *fp; char line[96]; char *p; if ((fp = fopen(NET_SOCKSTAT, "r")) == NULL) return; while (fgets(line, sizeof(line), fp) != NULL) { if (!strncmp(line, "sockets:", 8)) { /* Sockets */ sscanf(line + 14, "%u", &st_net_sock->sock_inuse); } else if (!strncmp(line, "TCP:", 4)) { /* TCP sockets */ sscanf(line + 11, "%u", &st_net_sock->tcp_inuse); if ((p = strstr(line, "tw")) != NULL) { sscanf(p + 2, "%u", &st_net_sock->tcp_tw); } } else if (!strncmp(line, "UDP:", 4)) { /* UDP sockets */ sscanf(line + 11, "%u", &st_net_sock->udp_inuse); } else if (!strncmp(line, "RAW:", 4)) { /* RAW sockets */ sscanf(line + 11, "%u", &st_net_sock->raw_inuse); } else if (!strncmp(line, "FRAG:", 5)) { /* FRAGments */ sscanf(line + 12, "%u", &st_net_sock->frag_inuse); } } fclose(fp); }
3.18 huge页面统计信息
huge_act通过读取/proc/meminfo获取huge页面统计信息。
void read_meminfo_huge(struct stats_huge *st_huge)
{
FILE *fp;
char line[128];
unsigned long szhkb = 0;
if ((fp = fopen(MEMINFO, "r")) == NULL)
return;
while (fgets(line, sizeof(line), fp) != NULL) {
if (!strncmp(line, "HugePages_Total:", 16)) {
/* Read the total number of huge pages */
sscanf(line + 16, "%lu", &st_huge->tlhkb);
}
else if (!strncmp(line, "HugePages_Free:", 15)) {
/* Read the number of free huge pages */
sscanf(line + 15, "%lu", &st_huge->frhkb);
}
else if (!strncmp(line, "Hugepagesize:", 13)) {
/* Read the default size of a huge page in kB */
sscanf(line + 13, "%lu", &szhkb);
}
}
fclose(fp);
/* We want huge pages stats in kB and not expressed in a number of pages */
st_huge->tlhkb *= szhkb;
st_huge->frhkb *= szhkb;
}
3.19 softnet统计信息
softnet_act通过/proc/net/softnet_stat获取统计信息，
void read_softnet(struct stats_softnet *st_softnet, int nbr)
{
FILE *fp;
struct stats_softnet *st_softnet_i;
char line[1024];
unsigned int proc_nb = 1;
/* Open /proc/net/softnet_stat file */
if ((fp = fopen(NET_SOFTNET, "r")) == NULL)
return;
/*
* Init a structure that will contain the values for CPU "all".
* CPU "all" doesn't exist in /proc/net/softnet_stat file, so
* we compute its values as the sum of the values of each CPU.
*/
memset(st_softnet, 0, sizeof(struct stats_softnet));
while ((fgets(line, sizeof(line), fp) != NULL) && (proc_nb < nbr)) {
st_softnet_i = st_softnet + proc_nb++;
sscanf(line, "%x %x %x %*x %*x %*x %*x %*x %*x %x %x",
&st_softnet_i->processed,
&st_softnet_i->dropped,
&st_softnet_i->time_squeeze,
&st_softnet_i->received_rps,
&st_softnet_i->flow_limit);
st_softnet->processed += st_softnet_i->processed;
st_softnet->dropped += st_softnet_i->dropped;
st_softnet->time_squeeze += st_softnet_i->time_squeeze;
st_softnet->received_rps += st_softnet_i->received_rps;
st_softnet->flow_limit += st_softnet_i->flow_limit;
}
fclose(fp);
}
/proc/net/softnet_stat数据来源于softnet_seq_show()。
static int softnet_seq_show(struct seq_file *seq, void *v) { struct softnet_data *sd = v; unsigned int flow_limit_count = 0; #ifdef CONFIG_NET_FLOW_LIMIT struct sd_flow_limit *fl; rcu_read_lock(); fl = rcu_dereference(sd->flow_limit); if (fl) flow_limit_count = fl->count; rcu_read_unlock(); #endif seq_printf(seq, "%08x %08x %08x %08x %08x %08x %08x %08x %08x %08x %08x\n", sd->processed, sd->dropped, sd->time_squeeze, 0, 0, 0, 0, 0, /* was fastroute */ 0, /* was cpu_collision */ sd->received_rps, flow_limit_count); return 0; }
联系方式:arnoldlu@qq.com
标签：fp,知识点,stats,st,ksar,act,sar,line,net 来源： https://www.cnblogs.com/sky-heaven/p/15852878.html