其他分享
首页 > 其他分享> > 扩大节

扩大节

作者:互联网

一、流程

1、打开文件

2、将文件读取到缓冲区(File-> FileBuffer)

3、将文件拉伸(FileBuffer->ImageBuffer)

4、修改SizeOfImage的大小(你要扩大多少,需要内存对齐)

5、申请一块SizeOfImage大小的内存(pNewImageBuffer)

6、将ImageBuffer拷贝到pNewImageBuffer

7、判断VirtualSize和SizeOfRawData的大小

8、VirtualSize大,内存对齐之后加上你要扩大多少字节

9、SizeOfRawData大,加上你要扩大多少字节

10、VirtualSize和SizeOfRawData要相等

11、将文件还原(pNewImageBuffer->NewBuffer)

12、存盘(NewBuffer->文件)

13、释放内存

二、完整代码

#include "stdafx.h"
#include <windows.h>
#include "stdlib.h"	
#include "stdio.h"	


#define FILEPATH_IN "C:/notepad.exe"
#define FILEPATH_OUT "C:/copyxx.exe"



DWORD ReadPEFile(IN LPSTR lpszFile,OUT LPVOID* pFileBuffer )
{
	FILE	*pFile		=	NULL;			
	DWORD	fileSize	=	0;			//文件大小
	LPVOID	pTempFileBuffer	=	NULL;	//缓冲区首地址

	
	pFile = fopen(lpszFile,"rb");	//打开文件
	if(!pFile)
	{
		printf("打开文件失败");
		return NULL;
	}

	//读取文件大小
	fseek(pFile,0,SEEK_END);		//将指针从开始的位置移动到末尾
	fileSize = ftell(pFile);		//获取数据大小

	//分配缓冲区(申请内存)
	pTempFileBuffer = malloc(fileSize);
	if(!pTempFileBuffer)
	{
		printf("分配空间失败");
		fclose(pFile);
		return NULL;
	}

	//将文件数据读取到缓冲区
	fseek(pFile,0,SEEK_SET);	//将指针指向开始
	size_t n = fread(pTempFileBuffer,fileSize,1,pFile);	//将数据读取到缓冲区中
	if(!n)
	{
		printf("读取数据失败");
		free(pTempFileBuffer);		//释放内存
		fclose(pFile);			//关闭文件
		return NULL;
	}

	//关闭文件
	*pFileBuffer = pTempFileBuffer;
	pTempFileBuffer = NULL;
	fclose(pFile);				//关闭文件
	return fileSize;		
}


DWORD CopyFileBufferToImageBuffer(IN LPVOID pFileBuffer,OUT LPVOID* pImageBuffer)
{
	PIMAGE_DOS_HEADER			pDosHeader		=	NULL;	//用来接收DOS头信息
	PIMAGE_NT_HEADERS			pNTHeader		=	NULL;
	PIMAGE_FILE_HEADER			pPEHeader		=	NULL;
	PIMAGE_OPTIONAL_HEADER32	pOptionHeader	=	NULL;
	PIMAGE_SECTION_HEADER		pSectionHeader	=	NULL;
	LPVOID						pTemImageBuffer	=	NULL;

//判断传入的值是否有效
	if(!pFileBuffer)
	{
		printf("缓冲区指针无效");
		return 0;
	}

//判断是否为PE文件
	if(*((PWORD)pFileBuffer)	!=	IMAGE_DOS_SIGNATURE)
	{
		printf("不是有效的MZ头\n");
		return 0;
	}

//获取头信息
	pDosHeader	=	(PIMAGE_DOS_HEADER)pFileBuffer;

	if(*((PDWORD)((DWORD)pFileBuffer + pDosHeader->e_lfanew))	!=	IMAGE_NT_SIGNATURE)
	{
		printf("不是有效的PE标志\n");
		return 0;
	}
	//NT头地址
	pNTHeader		=	(PIMAGE_NT_HEADERS)((DWORD)pFileBuffer	+	pDosHeader->e_lfanew);
	//标准PE头地址
	pPEHeader		=	(PIMAGE_FILE_HEADER)(((DWORD)pNTHeader) + 0x4);
	//可选PE头地址
	pOptionHeader	=	(PIMAGE_OPTIONAL_HEADER32)((DWORD)pPEHeader	+	IMAGE_SIZEOF_FILE_HEADER);	
	//第一个节表地址
	pSectionHeader	=	(PIMAGE_SECTION_HEADER)((DWORD)pOptionHeader	+	pPEHeader->SizeOfOptionalHeader);



	//申请缓冲区大小
	pTemImageBuffer = malloc(pOptionHeader->SizeOfImage);
	if(!pTemImageBuffer)
	{
		printf("分配空间失败");
		return 0;
	}
	//初始化缓冲区
	memset(pTemImageBuffer,0,pOptionHeader->SizeOfImage);
	//根据 SizeOfHeaders,先拷贝头
	memcpy(pTemImageBuffer,pDosHeader,pOptionHeader->SizeOfHeaders);
	//根据节表,循环拷贝节
	PIMAGE_SECTION_HEADER	pTempSectionHeader	=	pSectionHeader;
	for(int i=0;i<pPEHeader->NumberOfSections;i++,pTempSectionHeader++)
	{
		memcpy((void*)((DWORD)pTemImageBuffer + pTempSectionHeader->VirtualAddress),(void*)((DWORD)pFileBuffer + pTempSectionHeader->PointerToRawData),pTempSectionHeader->SizeOfRawData);
	}

	//返回数据
	*pImageBuffer = pTemImageBuffer;
	pTemImageBuffer	=	NULL;
	return 0;

}


DWORD CopyImageBufferToNewBuffer(IN LPVOID pImageBuffer,OUT LPVOID* pNewBuffer)
{

	PIMAGE_DOS_HEADER			pDosHeader		=	NULL;
	PIMAGE_NT_HEADERS			pNTHeader		=	NULL;
	PIMAGE_FILE_HEADER			pPEHeader		=	NULL;
	PIMAGE_OPTIONAL_HEADER32	pOptionHeader	=	NULL;
	PIMAGE_SECTION_HEADER		pSectionHeader	=	NULL;
	LPVOID						pTempNewBuffer	=	NULL;
	

	if(!pImageBuffer)
	{
		printf("缓冲区指针无效");
		return 0;
	}

	if(*((PWORD)pImageBuffer)	!=	IMAGE_DOS_SIGNATURE)
	{
		printf("不是有效的MZ头\n");
		return 0;
	}

	pDosHeader	=	(PIMAGE_DOS_HEADER)pImageBuffer;

	if(*((PDWORD)((DWORD)pImageBuffer + pDosHeader->e_lfanew))	!=	IMAGE_NT_SIGNATURE)
	{
		printf("不是有效的PE标志\n");
		return 0;
	}


	//NT头地址
	pNTHeader		=	(PIMAGE_NT_HEADERS)((DWORD)pImageBuffer	+	pDosHeader->e_lfanew);
	//标准PE头地址
	pPEHeader		=	(PIMAGE_FILE_HEADER)(((DWORD)pNTHeader) + 0x4);
	//可选PE头地址
	pOptionHeader	=	(PIMAGE_OPTIONAL_HEADER32)((DWORD)pPEHeader	+	IMAGE_SIZEOF_FILE_HEADER);	
	//第一个节表地址
	pSectionHeader	=	(PIMAGE_SECTION_HEADER)((DWORD)pOptionHeader	+	pPEHeader->SizeOfOptionalHeader);



	//数据大小(最后一个节的文件偏移 + 最后一个节的真实大小 + 文件对齐)
	DWORD	FileSize = (
		  (pSectionHeader + pPEHeader->NumberOfSections-1)->PointerToRawData 
		+ (pSectionHeader + pPEHeader->NumberOfSections-1)->Misc.VirtualSize 
		+ pOptionHeader->FileAlignment
		)&(0 - pOptionHeader->FileAlignment);
	pTempNewBuffer = malloc(FileSize);
	if(!pTempNewBuffer)
	{
		printf("分配空间失败");
		return 0;
	}
	//初始化缓冲区
	memset(pTempNewBuffer,0,FileSize);

	memcpy(pTempNewBuffer,pDosHeader,pOptionHeader->SizeOfHeaders);
	//根据节表,循环拷贝节
	PIMAGE_SECTION_HEADER	pTempSectionHeader	=	pSectionHeader;
	for(int i=0;i<pPEHeader->NumberOfSections;i++,pTempSectionHeader++)
	{
		memcpy((void*)((DWORD)pTempNewBuffer + pTempSectionHeader->PointerToRawData),
			(void*)((DWORD)pImageBuffer + pTempSectionHeader->VirtualAddress),
			pTempSectionHeader->Misc.VirtualSize);
	}

	*pNewBuffer = pTempNewBuffer;
	pTempNewBuffer	=	NULL;
	return FileSize;
}

BOOL MemeryTOFile(LPVOID pMemBuffer,size_t size,LPSTR lpszFile)
{
	FILE *fp = NULL;
	fp = fopen(lpszFile,"wb");	
	if(!fp)
	{
		return FALSE;
	}
	fwrite(pMemBuffer,size,1,fp);	//向磁盘写入数据
	fclose(fp);	//关闭文件
	fp = NULL;
	return TRUE;	

}

//对齐函数
DWORD Alignment(DWORD a,DWORD b)
{
	if( a > b )
	{
		a = (a/b + 1)*b;
		return a;	
	}else
	{
		a = b;
		return a;
	}
}

VOID Test()
{
	DWORD	Size			=	0;		//用来接收数据大小
	BOOL	isok			=	FALSE;		//用来接收写入磁盘是否成功
	PBYTE	CodeBegin		=	NULL;

	LPVOID	pFileBuffer		=	NULL;	//用来接收缓冲区的首地址
	LPVOID	pImageBuffer	=	NULL;
	LPVOID	pNewBuffer		=	NULL;
	LPVOID	pNewImageBuffer	=	NULL;


	PIMAGE_DOS_HEADER			pDosHeader		=	NULL;
	PIMAGE_NT_HEADERS			pNTHeader		=	NULL;
	PIMAGE_FILE_HEADER			pPEHeader		=	NULL;
	PIMAGE_OPTIONAL_HEADER32	pOptionHeader	=	NULL;
	PIMAGE_SECTION_HEADER		pSectionHeader	=	NULL;

	//File-> FileBuffer
	Size = ReadPEFile(FILEPATH_IN,&pFileBuffer);	//调用函数读取文件数据
	if(!pFileBuffer || !Size)
	{
		printf("File-> FileBuffer失败");
		return;
	}

	//FileBuffer->ImageBuffer
	CopyFileBufferToImageBuffer(pFileBuffer,&pImageBuffer);

	if(!pImageBuffer)
	{
		printf("FileBuffer->ImageBuffer失败");
		free(pFileBuffer);
		return;
	}

	//DOS头地址
	pDosHeader		=	(PIMAGE_DOS_HEADER)pImageBuffer;
	//NT头地址
	pNTHeader		=	(PIMAGE_NT_HEADERS)((DWORD)pImageBuffer	+	pDosHeader->e_lfanew);
	//标准PE头地址
	pPEHeader		=	(PIMAGE_FILE_HEADER)(((DWORD)pNTHeader) + 0x4);
	//可选PE头地址
	pOptionHeader	=	(PIMAGE_OPTIONAL_HEADER32)((DWORD)pPEHeader	+	IMAGE_SIZEOF_FILE_HEADER);	
	//第一个节表地址
	pSectionHeader	=	(PIMAGE_SECTION_HEADER)((DWORD)pOptionHeader	+	pPEHeader->SizeOfOptionalHeader);


	//修改SizeOfImage的大小
	pOptionHeader->SizeOfImage = pOptionHeader->SizeOfImage + pOptionHeader->SectionAlignment;

	//在原有数据的最后,新增数据(内存对齐的整数倍)
	pNewImageBuffer = malloc(pOptionHeader->SizeOfImage);
	memset(pNewImageBuffer,0,pOptionHeader->SizeOfImage);
	memcpy(pNewImageBuffer,pImageBuffer,pOptionHeader->SizeOfImage - pOptionHeader->SectionAlignment);

	//DOS头地址
	pDosHeader		=	(PIMAGE_DOS_HEADER)pNewImageBuffer;
	//NT头地址
	pNTHeader		=	(PIMAGE_NT_HEADERS)((DWORD)pNewImageBuffer	+	pDosHeader->e_lfanew);
	//标准PE头地址
	pPEHeader		=	(PIMAGE_FILE_HEADER)(((DWORD)pNTHeader) + 0x4);
	//可选PE头地址
	pOptionHeader	=	(PIMAGE_OPTIONAL_HEADER32)((DWORD)pPEHeader	+	IMAGE_SIZEOF_FILE_HEADER);	
	//第一个节表地址
	pSectionHeader	=	(PIMAGE_SECTION_HEADER)((DWORD)pOptionHeader	+	pPEHeader->SizeOfOptionalHeader);

	LPDWORD	pSectionAlignment =&pOptionHeader->SectionAlignment;
	LPDWORD pSecMisc	 = &(pSectionHeader + (pPEHeader->NumberOfSections -1))->Misc.VirtualSize;
	LPDWORD pSecSizeOfRawData = &(pSectionHeader + (pPEHeader->NumberOfSections -1))->SizeOfRawData;

	if(*pSecMisc > *pSecSizeOfRawData)
	{
		*pSecMisc = Alignment(*pSecMisc,*pSectionAlignment) +	pOptionHeader->FileAlignment;
		*pSecSizeOfRawData = *pSecMisc;	
	}else
	{
		*pSecSizeOfRawData = *pSecSizeOfRawData	+	pOptionHeader->FileAlignment;
		*pSecMisc = *pSecSizeOfRawData;
	}


	//pNewImageBuffer->NewBuffer
	Size = CopyImageBufferToNewBuffer(pNewImageBuffer,&pNewBuffer);
	if(!Size || !pNewBuffer)
	{
		printf("ImageBuffer->NewBuffer失败");
		free(pFileBuffer);
		free(pImageBuffer);
		return;
	}

	//NewBuffer->文件
	isok = MemeryTOFile(pNewBuffer,Size,FILEPATH_OUT);
	if(isok)
	{
		printf("存盘成功");
		return;
	}

	//释放内存
	free(pFileBuffer);
	free(pImageBuffer);
	free(pNewBuffer);

}



int main(int argc, char* argv[])
{
	Test();
	getchar();
	return 0;
}

标签:return,DWORD,HEADER,pOptionHeader,PIMAGE,NULL,扩大
来源: https://www.cnblogs.com/lnterpreter/p/15661975.html