其他分享
首页 > 其他分享> > Kibana 7.x配置与对外访问

Kibana 7.x配置与对外访问

作者：互联网

前言

我们在前面安装&部署Elasticsearch 7.x，这篇文章了解Elasticsearch中的可视工具Kibana，对存储的文档数据进行可视化。

环境配置

操作步骤

Kibana相关配置和操作使用普通用户权限；

  1. 下载Kibana 7.7.0，要与Elasticsearch版本保持一致；

  2. 下载文件名为kibana-7.7.0-linux-x86_64.tar.gz压缩包文件，上传至服务器目录；

  3. 解压到kibana部署目录：

    tar -zxf kibana-7.7.0-linux-x86_64.tar.gz

  4. 解压完成，目录名称为kibana-7.7.0-linux-x86_64，如有需要，也可更名为kibana:

    mv kibana-7.7.0-linux-x86_64 kibana

  5. 进入kibana目录，按需配置；

  6. 开启Kibana服务；

  7. 打开浏览器输入地址，进行访问。

Kibana配置文件

Kibana配置文件路径：

​ config/kibana.yml；

配置内容及说明

# Kibana is served by a back end server. This setting specifies the port to use.
# Kibana对外开放端口，默认是5601
server.port: 5601

# Specifies the address to which the Kibana server will bind. IP addresses and host names are both valid values.
# The default is 'localhost', which usually means remote machines will not be able to connect.
# To allow connections from remote users, set this parameter to a non-loopback address.
# Kibana绑定host，默认是localhost，远程及其不能连接；也可以配置本机局域网IP；0.0.0.0，表示所有远程机器可以连接
server.host: "0.0.0.0"
#server.host: "localhost"

# Enables you to specify a path to mount Kibana at if you are running behind a proxy.
# Use the `server.rewriteBasePath` setting to tell Kibana if it should remove the basePath
# from requests it receives, and to prevent a deprecation warning at startup.
# This setting cannot end in a slash.
#server.basePath: ""

# Specifies whether Kibana should rewrite requests that are prefixed with
# `server.basePath` or require that they are rewritten by your reverse proxy.
# This setting was effectively always `false` before Kibana 6.3 and will
# default to `true` starting in Kibana 7.0.
#server.rewriteBasePath: false

# The maximum payload size in bytes for incoming server requests.
#server.maxPayloadBytes: 1048576

# The Kibana server's name.  This is used for display purposes.
#server.name: "your-hostname"

# The URLs of the Elasticsearch instances to use for all your queries.
# Kibana监听elasticsearch实例地址，数组，可配置多个（集群）
elasticsearch.hosts: ["http://localhost:9201"]

# When this setting's value is true Kibana uses the hostname specified in the server.host
# setting. When the value of this setting is false, Kibana uses the hostname of the host
# that connects to this Kibana instance.
#elasticsearch.preserveHost: true

# Kibana uses an index in Elasticsearch to store saved searches, visualizations and
# dashboards. Kibana creates a new index if the index doesn't already exist.
# 配置Kibana在Elasticsearch中的索引
#kibana.index: ".kibana"

# The default application to load.
#kibana.defaultAppId: "home"

# If your Elasticsearch is protected with basic authentication, these settings provide
# the username and password that the Kibana server uses to perform maintenance on the Kibana
# index at startup. Your Kibana users still need to authenticate with Elasticsearch, which
# is proxied through the Kibana server.
# 配置访问elasticsearch实例的用户名和密码
#elasticsearch.username: "kibana"
#elasticsearch.password: "pass"

# Enables SSL and paths to the PEM-format SSL certificate and SSL key files, respectively.
# These settings enable SSL for outgoing requests from the Kibana server to the browser.
# SSL配置
#server.ssl.enabled: false
#server.ssl.certificate: /path/to/your/server.crt
#server.ssl.key: /path/to/your/server.key

# Optional settings that provide the paths to the PEM-format SSL certificate and key files.
# These files are used to verify the identity of Kibana to Elasticsearch and are required when
# xpack.security.http.ssl.client_authentication in Elasticsearch is set to required.
#elasticsearch.ssl.certificate: /path/to/your/client.crt
#elasticsearch.ssl.key: /path/to/your/client.key

# Optional setting that enables you to specify a path to the PEM file for the certificate
# authority for your Elasticsearch instance.
#elasticsearch.ssl.certificateAuthorities: [ "/path/to/your/CA.pem" ]

# To disregard the validity of SSL certificates, change this setting's value to 'none'.
#elasticsearch.ssl.verificationMode: full

# Time in milliseconds to wait for Elasticsearch to respond to pings. Defaults to the value of
# the elasticsearch.requestTimeout setting.
#elasticsearch.pingTimeout: 1500

# Time in milliseconds to wait for responses from the back end or Elasticsearch. This value
# must be a positive integer.
#elasticsearch.requestTimeout: 30000

# List of Kibana client-side headers to send to Elasticsearch. To send *no* client-side
# headers, set this value to [] (an empty list).
#elasticsearch.requestHeadersWhitelist: [ authorization ]

# Header names and values that are sent to Elasticsearch. Any custom headers cannot be overwritten
# by client-side headers, regardless of the elasticsearch.requestHeadersWhitelist configuration.
#elasticsearch.customHeaders: {}

# Time in milliseconds for Elasticsearch to wait for responses from shards. Set to 0 to disable.
#elasticsearch.shardTimeout: 30000

# Time in milliseconds to wait for Elasticsearch at Kibana startup before retrying.
#elasticsearch.startupTimeout: 5000

# Logs queries sent to Elasticsearch. Requires logging.verbose set to true.
#elasticsearch.logQueries: false

# Specifies the path where Kibana creates the process ID file.
# Kibana进程的pid输出路径
#pid.file: /var/run/kibana.pid

# Enables you specify a file where Kibana stores log output.
#logging.dest: stdout

# Set the value of this setting to true to suppress all logging output.
#logging.silent: false

# Set the value of this setting to true to suppress all logging output other than error messages.
#logging.quiet: false

# Set the value of this setting to true to log all events, including system usage information
# and all requests.
#logging.verbose: false

# Set the interval in milliseconds to sample system and process performance
# metrics. Minimum is 100ms. Defaults to 5000.
#ops.interval: 5000

# Specifies locale to be used for all localizable strings, dates and number formats.
# Supported languages are the following: English - en , by default , Chinese - zh-CN .
# Kibana可视化的国际化配置
#i18n.locale: "en"

关键配置说明

Kibana启动

Kibana对外访问

  1. 配置server.host，配置局域网IP或者0.0.0.0：

    server.host: "0.0.0.0"

  2. 关闭防火墙（使用root用户操作），也可以通过nginx进行代理：

    # 关闭防火墙
systemctl stop firewalld
# 查看防火墙状态
systemctl status firewalld

  3. 打开浏览器，输入http://192.168.234.129:5601；

  4. 如设置了密码，访问地址之后，输入用户名密码。

标签：Kibana,server,访问,setting,elasticsearch,kibana,Elasticsearch,对外
来源： https://blog.csdn.net/kaysenliang/article/details/121550429