数字图像处理 离散余弦变换(DCT)和峰值信噪比(PSNR)
作者：互联网
求输入图像和经过离散余弦逆变换之后的图像的峰值信噪比。并求出离散余弦逆变换的比特率。
一、名词简介
DCT - 离散余弦变换，在（声音、图像）数据压缩中得到了广泛的使用。
PSNR - 峰值信噪比（Peak Signal to Noise Ratio）缩写为PSNR，用来表示信号最大可能功率和影响它的表示精度的破坏性噪声功率的比值，可以显示图像画质损失的程度。峰值信噪比越大，表示画质损失越小。
MSE - 均方误差，（mean-square error, MSE）是反映估计量与被估计量之间差异程度的一种度量。
二、参考c++代码
#include <opencv2/core.hpp>
#include <opencv2/highgui.hpp>
#include <iostream>
#include <math.h>
#include <complex>
const int height = 128, width = 128, channel = 3;
// DCT超参数 DCT hyper-parameter
int T = 8;
int K = 4;
// DCT coefficient
struct dct_str {
double coef[height][width][channel];
};
// 离散余弦变换 Discrete Cosine transformation
dct_str dct(cv::Mat img, dct_str dct_s){
double I;
double F;
double Cu, Cv;
for(int ys = 0; ys < height; ys += T){
for(int xs = 0; xs < width; xs += T){
for(int c = 0; c < channel; c++){
for(int v = 0; v < T; v ++){
for(int u = 0; u < T; u ++){
F = 0;
if (u == 0){
Cu = 1. / sqrt(2);
} else{
Cu = 1;
}
if (v == 0){
Cv = 1. / sqrt(2);
}else {
Cv = 1;
}
for (int y = 0; y < T; y++){
for(int x = 0; x < T; x++){
I = (double)img.at<cv::Vec3b>(ys + y, xs + x)[c];
F += 2. / T * Cu * Cv * I * cos((2. * x + 1) * u * M_PI / 2. / T) * cos((2. * y + 1) * v * M_PI / 2. / T);
}
}
dct_s.coef[ys + v][xs + u][c] = F;
}
}
}
}
}
return dct_s;
}
// 逆离散余弦变换 Inverse Discrete Cosine transformation
cv::Mat idct(cv::Mat out, dct_str dct_s){
double f;
double Cu, Cv;
for (int ys = 0; ys < height; ys += T){
for (int xs = 0; xs < width; xs += T){
for(int c = 0; c < channel; c++){
for (int y = 0; y < T; y++){
for (int x = 0; x < T; x++){
f = 0;
for (int v = 0; v < K; v++){
for (int u = 0; u < K; u++){
if (u == 0){
Cu = 1. / sqrt(2);
} else {
Cu = 1;
}
if (v == 0){
Cv = 1. / sqrt(2);
} else {
Cv = 1;
}
f += 2. / T * Cu * Cv * dct_s.coef[ys + v][xs + u][c] * cos((2. * x + 1) * u * M_PI / 2. / T) * cos((2. * y + 1) * v * M_PI / 2. / T);
}
}
f = fmin(fmax(f, 0), 255);
out.at<cv::Vec3b>(ys + y, xs + x)[c] = (uchar)f;
}
}
}
}
}
return out;
}
// 计算均方误差 Compute MSE
double MSE(cv::Mat img1, cv::Mat img2){
double mse = 0;
for(int y = 0; y < height; y++){
for(int x = 0; x < width; x++){
for(int c = 0; c < channel; c++){
mse += pow(((double)img1.at<cv::Vec3b>(y, x)[c] - (double)img2.at<cv::Vec3b>(y, x)[c]), 2);
}
}
}
mse /= (height * width);
return mse;
}
// 计算峰值信噪比 Compute PSNR
double PSNR(double mse, double v_max){
return 10 * log10(v_max * v_max / mse);
}
// 计算比例 Compute bitrate
double BITRATE(){
return T * K * K / T * T;
}
// Main
int main(int argc, const char* argv[]){
double mse;
double psnr;
double bitrate;
// read original image
cv::Mat img = cv::imread("imori.jpg", cv::IMREAD_COLOR);
// DCT coefficient
dct_str dct_s;
// output image
cv::Mat out = cv::Mat::zeros(height, width, CV_8UC3);
// DCT
dct_s = dct(img, dct_s);
// IDCT
out = idct(out, dct_s);
// MSE, PSNR
mse = MSE(img, out);
psnr = PSNR(mse, 255);
bitrate = BITRATE();
std::cout << "MSE: " << mse << std::endl;
std::cout << "PSNR: " << psnr << std::endl;
std::cout << "bitrate: " << bitrate << std::endl;
cv::imwrite("out.jpg", out);
//cv::imshow("answer", out);
//cv::waitKey(0);
cv::destroyAllWindows();
return 0;
}
三、参考python代码
import cv2
import numpy as np
import matplotlib.pyplot as plt
# DCT hyoer-parameter
T = 8
K = 4
channel = 3
# DCT weight
def w(x, y, u, v):
cu = 1.
cv = 1.
if u == 0:
cu /= np.sqrt(2)
if v == 0:
cv /= np.sqrt(2)
theta = np.pi / (2 * T)
return (( 2 * cu * cv / T) * np.cos((2*x+1)*u*theta) * np.cos((2*y+1)*v*theta))
# DCT
def dct(img):
H, W, _ = img.shape
F = np.zeros((H, W, channel), dtype=np.float32)
for c in range(channel):
for yi in range(0, H, T):
for xi in range(0, W, T):
for v in range(T):
for u in range(T):
for y in range(T):
for x in range(T):
F[v+yi, u+xi, c] += img[y+yi, x+xi, c] * w(x,y,u,v)
return F
# IDCT
def idct(F):
H, W, _ = F.shape
out = np.zeros((H, W, channel), dtype=np.float32)
for c in range(channel):
for yi in range(0, H, T):
for xi in range(0, W, T):
for y in range(T):
for x in range(T):
for v in range(K):
for u in range(K):
out[y+yi, x+xi, c] += F[v+yi, u+xi, c] * w(x,y,u,v)
out = np.clip(out, 0, 255)
out = np.round(out).astype(np.uint8)
return out
# MSE
def MSE(img1, img2):
H, W, _ = img1.shape
mse = np.sum((img1 - img2) ** 2) / (H * W * channel)
return mse
# PSNR
def PSNR(mse, vmax=255):
return 10 * np.log10(vmax * vmax / mse)
# bitrate
def BITRATE():
return 1. * T * K * K / T / T
# Read image
img = cv2.imread("imori.jpg").astype(np.float32)
# DCT
F = dct(img)
# IDCT
out = idct(F)
# MSE
mse = MSE(img, out)
# PSNR
psnr = PSNR(mse)
# bitrate
bitrate = BITRATE()
print("MSE:", mse)
print("PSNR:", psnr)
print("bitrate:", bitrate)
# Save result
cv2.imshow("result", out)
cv2.waitKey(0)
cv2.imwrite("out.jpg", out)四、OpencvSharp版本部分代码
// 读取原始文件
Mat img = Cv2.ImRead(@"C:\Users\xiaomao\Desktop\lena.jpg", ImreadModes.Grayscale);
// 转为32FC1
Mat src = new Mat();
img.ConvertTo(src, MatType.CV_32FC1);
// 进行离散余弦变换
Mat dct = new Mat(img.Size(), MatType.CV_32FC1);
Cv2.Dct(src, dct);
// 进行逆离散余弦变换
Mat idct = new Mat(img.Size(), MatType.CV_32FC1);
Cv2.Idct(dct, idct);
// 将逆离散余弦变换结果转换为8UC1
idct.ConvertTo(src, MatType.CV_8UC1);
// 计算psnr，使用lena女神的图像测试结果为361.20199909921956
double psnr = Cv2.PSNR(img, idct);
// 存储变换后的图像
Cv2.ImWrite(@"C:\Users\zyh\Desktop\lena_idct.jpg", src);
标签：PSNR,img,int,double,数字图像处理,DCT,mse,dct,out 来源： https://blog.csdn.net/bashendixie5/article/details/121437383