Jewel版cephfs当rm -rf文件时报错"No space left on device"

Jewel版cephfs当rm -rf文件时报错"No space left on device"

• 一、概述
  • 临时的解决方法：
  • 永久解决方法
• 二、详情
  • 查看当前mds的状态
  • 修改参数
  • 依据
• 三、参考网址

一、概述

原因：cephfs的stray满了

stray就相当于回收站，stray有文件数限制，默认是10万，定时删除，但删除的很慢。导致stray一直处于满的状态。

临时的解决方法：

ceph tell mds.node01 injectargs --mds_bal_fragment_size_max 1000000

然后把mds_bal_fragment_size_max写到配置文件里。
大功告成了。

永久解决方法

https://cloud.tencent.com/developer/article/1177839
(没试过)

二、详情

因为线上环境直接重启肯定不好。所以还是一边监测一边调整参数。

查看当前mds的状态

$ ceph daemonperf mds.node3
-----mds------ --mds_server-- ---objecter--- -----mds_cache----- ---mds_log---- 
rlat inos caps|hsr  hcs  hcr |writ read actv|recd recy stry purg|segs evts subm|
  0   26k 129 |  0    0    0 |  0    0    0 |  0    0  6.2k   0 | 31  136    0 
  0   26k 129 |  0    0    0 |  0    0    0 |  0    0  6.2k   0 | 31  136    0 

其中node3是自己active的mds的名称。

修改参数

$ ceph daemon mds.node3 config show | grep mds_bal_fragment_size_max
    "mds_bal_fragment_size_max": "100000",

#修改mds_bal_fragment_size_max
$ ceph tell mds.node01 injectargs --mds_bal_fragment_size_max 1000000

查询命令还可以使用。"ceph --show-config"
同理修改其他配置：(有一点效果，但不推荐)

ceph tell mds.node03 injectargs --filer_max_purge_ops 10000
ceph tell mds.node03 injectargs --mds_max_purge_files 256

修改完后再次查看mds状态，会发现purge的数据频率会略微提升。

依据

源码文件StrayManager.cc

/*
 * Note that there are compromises to how throttling
 * is implemented here, in the interests of simplicity:
 *  * If insufficient ops are available to execute
 *    the next item on the queue, we block even if
 *    there are items further down the queue requiring
 *    fewer ops which might be executable
 *  * The ops considered "in use" by a purge will be
 *    an overestimate over the period of execution, as
 *    we count filer_max_purge_ops and ops for old backtraces
 *    as in use throughout, even though towards the end
 *    of the purge the actual ops in flight will be
 *    lower.
 *  * The ops limit may be exceeded if the number of ops
 *    required by a single inode is greater than the
 *    limit, for example directories with very many
 *    fragments.
 */
 /*......*/
  // Work out a limit based on n_pgs / n_mdss, multiplied by the user's
  // preference for how many ops per PG
  max_purge_ops = uint64_t(((double)pg_count / (double)mds_count) *
			   g_conf->mds_max_purge_ops_per_pg);

  // User may also specify a hard limit, apply this if so.
  if (g_conf->mds_max_purge_ops) {
    max_purge_ops = MIN(max_purge_ops, g_conf->mds_max_purge_ops);
  } 

三、参考网址

https://www.cnblogs.com/hlc-123/p/10700725.html
https://www.cnblogs.com/zphj1987/p/13575384.html
http://blog.wjin.org/posts/cephfs-remove-file-error.html
https://cloud.tencent.com/developer/article/1177839
https://docs.ceph.com/en/latest/cephfs/mds-config-ref/#
https://cloud.tencent.com/developer/article/1181883
https://tracker.ceph.com/issues/15920?journal_id=71023

标签：purge,ceph,ops,--,max,space,Jewel,No,mds
来源： https://www.cnblogs.com/bugutian/p/15216479.html