标签:kernel log klogctl buffer len SYSLOG command ACTION
linux app read kernel log
man klogctl:
int klogctl(int type, char *bufp, int len);
SYSLOG(2) Linux Programmer's Manual SYSLOG(2)
NAME
syslog, klogctl - read and/or clear kernel message ring buffer; set console_loglevel
SYNOPSIS
int syslog(int type, char *bufp, int len);
/* No wrapper provided in glibc */
/* The glibc interface */
#include <sys/klog.h>
int klogctl(int type, char *bufp, int len);
DESCRIPTION
Note: Probably, you are looking for the C library function syslog(), which talks to syslogd(8); see syslog(3) for
details.
This page describes the kernel syslog() system call, which is used to control the kernel printk() buffer; the glibc
wrapper function for the system call is called klogctl().
The kernel log buffer
The kernel has a cyclic buffer of length LOG_BUF_LEN in which messages given as arguments to the kernel function
printk() are stored (regardless of their log level). In early kernels, LOG_BUF_LEN had the value 4096; from kernel
1.3.54, it was 8192; from kernel 2.1.113, it was 16384; since kernel 2.4.23/2.6, the value is a kernel configura-
tion option (CONFIG_LOG_BUF_SHIFT, default value dependent on the architecture). Since Linux 2.6.6, the size can
be queried with command type 10 (see below).
Commands
The type argument determines the action taken by this function. The list below specifies the values for type. The
symbolic names are defined in the kernel source, but are not exported to user space; you will either need to use
the numbers, or define the names yourself.
SYSLOG_ACTION_CLOSE (0)
Close the log. Currently a NOP.
SYSLOG_ACTION_OPEN (1)
Open the log. Currently a NOP.
SYSLOG_ACTION_READ (2)
Read from the log. The call waits until the kernel log buffer is nonempty, and then reads at most len bytes
into the buffer pointed to by bufp. The call returns the number of bytes read. Bytes read from the log
disappear from the log buffer: the information can be read only once. This is the function executed by the
kernel when a user program reads /proc/kmsg.
SYSLOG_ACTION_READ_ALL (3)
Read all messages remaining in the ring buffer, placing them in the buffer pointed to by bufp. The call
reads the last len bytes from the log buffer (nondestructively), but will not read more than was written
into the buffer since the last "clear ring buffer" command (see command 5 below)). The call returns the
number of bytes read.
SYSLOG_ACTION_READ_CLEAR (4)
Read and clear all messages remaining in the ring buffer. The call does precisely the same as for a type of
3, but also executes the "clear ring buffer" command.
SYSLOG_ACTION_CLEAR (5)
The call executes just the "clear ring buffer" command. The bufp and len arguments are ignored.
This command does not really clear the ring buffer. Rather, it sets a kernel bookkeeping variable that de-
termines the results returned by commands 3 (SYSLOG_ACTION_READ_ALL) and 4 (SYSLOG_ACTION_READ_CLEAR). This
command has no effect on commands 2 (SYSLOG_ACTION_READ) and 9 (SYSLOG_ACTION_SIZE_UNREAD).
SYSLOG_ACTION_CONSOLE_OFF (6)
The command saves the current value of console_loglevel and then sets console_loglevel to minimum_con-
sole_loglevel, so that no messages are printed to the console. Before Linux 2.6.32, the command simply sets
console_loglevel to minimum_console_loglevel. See the discussion of /proc/sys/kernel/printk, below.
The bufp and len arguments are ignored.
SYSLOG_ACTION_CONSOLE_ON (7)
If a previous SYSLOG_ACTION_CONSOLE_OFF command has been performed, this command restores console_loglevel
to the value that was saved by that command. Before Linux 2.6.32, this command simply sets console_loglevel
to default_console_loglevel. See the discussion of /proc/sys/kernel/printk, below.
The bufp and len arguments are ignored.
SYSLOG_ACTION_CONSOLE_LEVEL (8)
The call sets console_loglevel to the value given in len, which must be an integer between 1 and 8 (inclu-
sive). The kernel silently enforces a minimum value of minimum_console_loglevel for len. See the log level
section for details. The bufp argument is ignored.
SYSLOG_ACTION_SIZE_UNREAD (9) (since Linux 2.4.10)
The call returns the number of bytes currently available to be read from the kernel log buffer via command 2
(SYSLOG_ACTION_READ). The bufp and len arguments are ignored.
SYSLOG_ACTION_SIZE_BUFFER (10) (since Linux 2.6.6)
This command returns the total size of the kernel log buffer. The bufp and len arguments are ignored.
All commands except 3 and 10 require privilege. In Linux kernels before 2.6.37, command types 3 and 10 are allowed
to unprivileged processes; since Linux 2.6.37, these commands are allowed to unprivileged processes only if
/proc/sys/kernel/dmesg_restrict has the value 0. Before Linux 2.6.37, "privileged" means that the caller has the
CAP_SYS_ADMIN capability. Since Linux 2.6.37, "privileged" means that the caller has either the CAP_SYS_ADMIN ca-
pability (now deprecated for this purpose) or the (new) CAP_SYSLOG capability.
/* kernel\printk.c */
...
SYSCALL_DEFINE3(syslog, int, type, char __user *, buf, int, len)
{
return do_syslog(type, buf, len, SYSLOG_FROM_CALL);
}
...
标签:kernel,log,klogctl,buffer,len,SYSLOG,command,ACTION
来源: https://www.cnblogs.com/WangYangkai/p/14769562.html
本站声明:
1. iCode9 技术分享网(下文简称本站)提供的所有内容,仅供技术学习、探讨和分享;
2. 关于本站的所有留言、评论、转载及引用,纯属内容发起人的个人观点,与本站观点和立场无关;
3. 关于本站的所有言论和文字,纯属内容发起人的个人观点,与本站观点和立场无关;
4. 本站文章均是网友提供,不完全保证技术分享内容的完整性、准确性、时效性、风险性和版权归属;如您发现该文章侵犯了您的权益,可联系我们第一时间进行删除;
5. 本站为非盈利性的个人网站,所有内容不会用来进行牟利,也不会利用任何形式的广告来间接获益,纯粹是为了广大技术爱好者提供技术内容和技术思想的分享性交流网站。