jmeter-3-linux下环境搭建jmeter+ant
作者：互联网
前言
继上篇Windows搭建 jmeter + ant +jenkins实现后，那么我们平时一般都是集成在linux服务器上。
所以这次我们来Linux下搭建 jmeter + ant +jenkins，废话不多说，走起！！！
一、环境准备
1、jdk1.8以上：
jdk安装教程详细参考(docker安装jenkins的小伙伴请忽略此步骤)：linux下安装jdk：https://www.cnblogs.com/gsxl/p/12128768.html
或者yum安装：yum install java-1.8.0-openjdk.x86_64
2、jmeter：
所有版本：https://archive.apache.org/dist/jmeter/binaries/
本篇直接点击此链接下载：https://archive.apache.org/dist/jmeter/binaries/apache-jmeter-5.3.tgz 下载后上传至linux直接解压，或者wget下载
wget 下载：
wget https://archive.apache.org/dist/jmeter/binaries/apache-jmeter-5.3.tgz
注意Linux后缀为.zip，如：apache-jmeter-5.3.tgz
解压：tar -xvf apache-jmeter-5.3.tgz
[root@iZbp19lugf22zbsubsf1y6Z jmeter-ant]# tar -xvf apache-jmeter-5.3.tgz apache-jmeter-5.3/ apache-jmeter-5.3/LICENSE apache-jmeter-5.3/NOTICE
3、ant：
所有版本：https://downloads.apache.org/ant/binaries/
本篇直接点击此链接下载：https://downloads.apache.org/ant/binaries/apache-ant-1.9.15-bin.tar.gz 下载后直接解压：
注意Windows后缀为.zip，如：apache-ant-1.9.15-bin.tar.gz
设置环境变量：
①将bin、lib目录添加至环境变量中的系统变量path即可，如下图我的解压路径：
编辑，命令：vi /etc/profile
复制以下添加保存退出后，输入：source /etc/profile
# ANT_HOME ANT_HOME=/root/jmeter-ant/apache-ant-1.9.15 export PATH=$PATH:$ANT_HOME/bin export PATH=$PATH:$ANT_HOME/lib
输入命令验证版本：ant -version
二、jmeter、ant各种配置
1、jmeter配置：
①将jmeter目录bin\jmeter.properties的490行-528行改为如下：
注意：是jmeter.properties文件，在490-528行中，凡是有jmeter开头的且有#号都需要去掉，或者直接复制下面替换490-528行；
jmeter.save.saveservice.output_format=xml # The below properties are true when field should be saved; false otherwise # # assertion_results_failure_message only affects CSV output jmeter.save.saveservice.assertion_results_failure_message=true # # legitimate values: none, first, all jmeter.save.saveservice.assertion_results=true # jmeter.save.saveservice.data_type=true jmeter.save.saveservice.label=true jmeter.save.saveservice.response_code=true # response_data is not currently supported for CSV output jmeter.save.saveservice.response_data=true # Save ResponseData for failed samples jmeter.save.saveservice.response_data.on_error=true jmeter.save.saveservice.response_message=true jmeter.save.saveservice.successful=true jmeter.save.saveservice.thread_name=true jmeter.save.saveservice.time=true jmeter.save.saveservice.subresults=true jmeter.save.saveservice.assertions=true jmeter.save.saveservice.latency=true # Only available with HttpClient4 jmeter.save.saveservice.connect_time=true jmeter.save.saveservice.samplerData=true jmeter.save.saveservice.responseHeaders=true jmeter.save.saveservice.requestHeaders=true jmeter.save.saveservice.encoding=true jmeter.save.saveservice.bytes=true # Only available with HttpClient4 jmeter.save.saveservice.sent_bytes=true jmeter.save.saveservice.url=true jmeter.save.saveservice.filename=true jmeter.save.saveservice.hostname=true jmeter.save.saveservice.thread_counts=true jmeter.save.saveservice.sample_count=true jmeter.save.saveservice.idle_time=true
更改完成后，我是ftp上传(或者vi编辑)：
2、ant 配置
①将apache-jmeter-5.3\extras目录下的：ant-jmeter-1.1.1.jar 复制到apache-ant-1.9.15\lib\
命令：cp 文件路径 复制到哪文件路径
[root@iZbp19lugf22zbsubsf1y6Z apache-jmeter-5.3]# cp extras/ant-jmeter-1.1.1.jar ../apache-ant-1.9.15/lib/ant-jmeter-1.1.1.jar [root@iZbp19lugf22zbsubsf1y6Z apache-jmeter-5.3]#
②创建以下目录文件(网盘下载的不需要再新建了)：
推荐直接网盘下载完整文件夹，链接：https://pan.baidu.com/s/1dKy6GpHFDMBIYK0qQixdiA 提取码：gsxl
③编辑build.xml：(vi编辑或者在自己Windows电脑编辑好再上传)
将你的（1）-（5）都改为自己的路径，保存：
三、运行ant run
1、在目录下运行：ant
[root@iZbp19lugf22zbsubsf1y6Z standard-catalog]# ant
Buildfile: /root/jmeter-ant/standard-catalog/build.xml
[taskdef] Could not load definitions from resource net/sf/antcontrib/antlib.xml. It could not be found.
run:
[taskdef] Could not load definitions from resource net/sf/antcontrib/antlib.xml. It could not be found.
test:
[jmeter] Executing test plan: /root/jmeter-ant/standard-catalog/xxx-business.jmx ==> /root/jmeter-ant/standard-catalog/jtl/InterfaceReport202009181126.jtl
[jmeter] Creating summariser <summary>
[jmeter] Created the tree successfully using /root/jmeter-ant/standard-catalog/xxx-business.jmx
[jmeter] Starting standalone test @ Fri Sep 18 23:26:06 CST 2020 (1600442766325)
[jmeter] Waiting for possible Shutdown/StopTestNow/HeapDump/ThreadDump message on port 4445
[jmeter] summary = 9 in 00:00:01 = 7.4/s Avg: 92 Min: 12 Max: 659 Err: 0 (0.00%)
[jmeter] Tidying up ... @ Fri Sep 18 23:26:08 CST 2020 (1600442768253)
[jmeter] ... end of run
[jmeter] Executing test plan: /root/jmeter-ant/standard-catalog/xxx-shopping.jmx ==> /root/jmeter-ant/standard-catalog/jtl/InterfaceReport202009181126.jtl
[jmeter] Creating summariser <summary>
[jmeter] Created the tree successfully using /root/jmeter-ant/standard-catalog/xxx-shopping.jmx
[jmeter] Starting standalone test @ Fri Sep 18 23:26:10 CST 2020 (1600442770591)
[jmeter] Waiting for possible Shutdown/StopTestNow/HeapDump/ThreadDump message on port 4445
[jmeter] summary = 6 in 00:00:01 = 4.3/s Avg: 175 Min: 19 Max: 784 Err: 0 (0.00%)
[jmeter] Tidying up ... @ Fri Sep 18 23:26:12 CST 2020 (1600442772678)
[jmeter] ... end of run
[taskdef] Could not load definitions from resource net/sf/antcontrib/antlib.xml. It could not be found.
report:
[xslt] Processing /root/jmeter-ant/standard-catalog/jtl/InterfaceReport202009181126.jtl to /root/jmeter-ant/standard-catalog/html/InterfaceReport.html
[xslt] Loading stylesheet /root/jmeter-ant/standard-catalog/xsl/jmeter.results.shanhe.me.xsl
[copy] Copying 2 files to /root/jmeter-ant/standard-catalog/html
BUILD SUCCESSFUL
Total time: 10 seconds
2、html目录下：查看报告
利用：anywhere生成外网可访问
anywhere安装请参考：https://www.cnblogs.com/gsxl/p/13193939.html 第二大点，标题：二、 node.js +Anywhere + html
[root@iZbp19lugf22zbsubsf1y6Z standard-catalog]# cd html/ [root@iZbp19lugf22zbsubsf1y6Z html]# anywhere -p 8055 Running at http://xxx.16.xx.2xx:8055/ Also running at https://xxx.16.1xx.2xx:8056/
欢迎来大家QQ交流群一起学习：482713805
标签：jmeter,ant,linux,apache,save,true,saveservice 来源： https://www.cnblogs.com/gsxl/p/13660988.html