ubuntu18.04, cuda10 anaconda编译安装caffe
作者：互联网
弄了好几天，终于安装上了。全是亲身踩过的坑。
可能是我linux使用不熟练，配置过程中出现问题不知道怎么解。所以我要记录全面一点。
一、知识点-添加环境变量
0查看环境变量
可以``export``查看所有的变量。可以通过``export | grep anaconda`` 筛选出你想要查看的关键词，这里grep后面就是你要抓取的关键词。
1 临时添加
在末尾添加
export PATH=$PATH:/home/nnir712/software/protobuf/bin
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/home/nnir712/software/protobuf/lib
直接赋值就会覆盖之前原来的变量
export PATH=:/home/nnir712/software/protobuf/bin
2 永久添加
.bashrc
`vi ~/.bashrc `在文件里加入想要添加的环境变量，比如
PATH=$PATH:/home/nnir712/software/protobuf/bin
这种修改需要重启terminal窗口才能生效
profile
`vi /etc/profile ` 同样在文件里加入想要添加的环境变量，比如
PATH=$PATH:/home/nnir712/software/protobuf/bin
这种修改需要重启电脑才能生效
二、anaconda环境的 caffe安装
三个比较靠谱的参考
caffe安装、
[Ubuntu16.04 Caffe 安装步骤记录（超详尽）]
[Caffe学习(二)—下载、编译和安装Caffe（源码安装方式）]
最后我是参考的[caffe安装]()成功的
**所有的安装，也不一定是这固定顺序。**
不同的conda版本也会有不同的性格。我发现，我第一次安装成功了，第二次再这样操作就不行了。
1、安装依赖
### 先装skimage。numpy
与他们不同的是，我先安装numpy。因为我发现caffe需要用到skimage。而这里面有存在numpy与skimage版本不兼容的问题[numpy/issues](https://github.com/numpy/numpy/issues/12744)。最后发现1.15.4的numpy可以支持skimage
`
conda install numpy==1.15.4
conda install -c conda-forge scikit-image
激活python试试能不能用：from skimage import io,transform
只要没报错就成功了`
这里也不一定先安装numpy。因为我第二次尝试时发现装了numpy==1.15.4，skimage装不上了。貌似是conda更新了。
直接conda install -c conda-forge scikit-image就可以了，conda自动帮我安装了numpy1.11.3版本的。
### 依赖
conda install boost hdf5 snappy leveldb lmdb gflags glog
## 2、protobuf
这个protobuf很乱。也许你的环境里就有。
你可以先通过``protoc --version``查询一下，如果能报出版本号，就说明安装了。但是也要注意，可能需要你卸载重新安装。
它可以通过3种方式安装。但是还是推荐使用②conda安装，因为我这样装的，能用。
①apt安装
这种方式会把protoc安装到``/usr/bin``里面，可以通过``ls /usr/bin | grep protoc``查看这里有没有。``/usr/bin``一般都会添加在PATH的环境变量里，所以只要你用apt安装了protobuf，所有的环境都会找到，包括anaconda的沙箱中，因此你用anaconda再安装一遍就会有两个位置安装，就很乱。
如果不行的话就先卸载，再安装。
sudo apt-get remove libprotobuf-dev
sudo apt-get remove protobuf-compiler
安装：
sudo apt-get install libprotobuf-dev protobuf-compiler
②conda安装
这里也是参考[caffe安装](
``conda install protobuf==3.5.1``
添加环境变量：
``echo 'export PATH=/home/nnir712/anaconda3/pkgs/libprotobuf-3.5.2-h6f1eeef_0/bin:$PATH' >> ~/.bashrc
echo 'export LD_LIBRARY_PATH=/home/nnir712/anaconda3/pkgs/libprotobuf-3.5.2-h6f1eeef_0/lib:$LD_LIBRARY_PATH' >> ~/.bashrc``
重新激活：
``source ~/.bashrc``
再编译安装protocbuf-python
[下载protobuf](https://github.com/protocolbuffers/protobuf/releases/tag/v3.5.1)
tar -xzvf protobuf-python-3.5.1.tar.gz
cd protobuf-3.5.1
cd python
python setup.py build
python setup.py test
python setup.py install
③编译安装
参考[源码编译安装](https://blog.csdn.net/wenwenxiong/article/details/53644845)
3、修改Makefile.config
完全参考[caffe安装](https://zoesxw.github.io/2018/07/14/caffe%E5%AE%89%E8%A3%85/)的经验
主要是注意python的路径设置ANACONDA_HOME、PYTHON_INCLUDE、PYTHON_LIB
其他设置的不对，编译时会提示你的
## Refer to http://caffe.berkeleyvision.org/installation.html
# Contributions simplifying and improving our build system are welcome!
# cuDNN acceleration switch (uncomment to build with cuDNN).
USE_CUDNN := 1
# CPU-only switch (uncomment to build without GPU support).
# CPU_ONLY := 1
# uncomment to disable IO dependencies and corresponding data layers
USE_OPENCV := 0
# USE_LEVELDB := 0
# USE_LMDB := 0
# This code is taken from https://github.com/sh1r0/caffe-android-lib
# USE_HDF5 := 0
# uncomment to allow MDB_NOLOCK when reading LMDB files (only if necessary)
# You should not set this flag if you will be reading LMDBs with any
# possibility of simultaneous read and write
# ALLOW_LMDB_NOLOCK := 1
# Uncomment if you're using OpenCV 3
OPENCV_VERSION := 3
# To customize your choice of compiler, uncomment and set the following.
# N.B. the default for Linux is g++ and the default for OSX is clang++
# CUSTOM_CXX := g++
# CUDA directory contains bin/ and lib/ directories that we need.
CUDA_DIR := /usr/local/cuda-10.0
# On Ubuntu 14.04, if cuda tools are installed via
# "sudo apt-get install nvidia-cuda-toolkit" then use this instead:
# CUDA_DIR := /usr
# CUDA architecture setting: going with all of them.
# For CUDA < 6.0, comment the *_50 through *_61 lines for compatibility.
# For CUDA < 8.0, comment the *_60 and *_61 lines for compatibility.
# For CUDA >= 9.0, comment the *_20 and *_21 lines for compatibility.
CUDA_ARCH := -gencode arch=compute_30,code=sm_30 \
-gencode arch=compute_35,code=sm_35 \
-gencode arch=compute_50,code=sm_50 \
-gencode arch=compute_52,code=sm_52 \
-gencode arch=compute_60,code=sm_60 \
-gencode arch=compute_61,code=sm_61 \
-gencode arch=compute_61,code=compute_61
# BLAS choice:
# atlas for ATLAS (default)
# mkl for MKL
# open for OpenBlas
BLAS := atlas
# Custom (MKL/ATLAS/OpenBLAS) include and lib directories.
# Leave commented to accept the defaults for your choice of BLAS
# (which should work)!
# BLAS_INCLUDE := /path/to/your/blas
# BLAS_LIB := /path/to/your/blas
# Homebrew puts openblas in a directory that is not on the standard search path
# BLAS_INCLUDE := $(shell brew --prefix openblas)/include
# BLAS_LIB := $(shell brew --prefix openblas)/lib
# This is required only if you will compile the matlab interface.
# MATLAB directory should contain the mex binary in /bin.
# MATLAB_DIR := /usr/local
# MATLAB_DIR := /Applications/MATLAB_R2012b.app
# NOTE: this is required only if you will compile the python interface.
# We need to be able to find Python.h and numpy/arrayobject.h.
#PYTHON_INCLUDE := /usr/include/python2.7 \
# /usr/lib/python2.7/dist-packages/numpy/core/include
# Anaconda Python distribution is quite popular. Include path:
# Verify anaconda location, sometimes it's in root.
ANACONDA_HOME := $(HOME)/anaconda3
#PYTHON_INCLUDE := $(ANACONDA_HOME)/include \
# $(ANACONDA_HOME)/include/python3.6m \
# $(ANACONDA_HOME)/lib/python3.6/site-packages/numpy/core/include
PYTHON_INCLUDE := $(ANACONDA_HOME)/envs/skimg/include \
$(ANACONDA_HOME)/envs/skimg/include/python3.6m \
$(ANACONDA_HOME)/envs/skimg/lib/python3.6/site-packages/numpy/core/include
# Uncomment to use Python 3 (default is Python 2)
PYTHON_LIBRARIES := boost_python36 python3.6m
# PYTHON_INCLUDE := /usr/include/python3.5m \
# /usr/lib/python3.5/dist-packages/numpy/core/include
# We need to be able to find libpythonX.X.so or .dylib.
PYTHON_LIB := /usr/lib
PYTHON_LIB := $(ANACONDA_HOME)/envs/skimg/lib
# Homebrew installs numpy in a non standard path (keg only)
# PYTHON_INCLUDE += $(dir $(shell python -c 'import numpy.core; print(numpy.core.__file__)'))/include
# PYTHON_LIB += $(shell brew --prefix numpy)/lib
# Uncomment to support layers written in Python (will link against Python libs)
WITH_PYTHON_LAYER := 1
# Whatever else you find you need goes here.
INCLUDE_DIRS := $(PYTHON_INCLUDE) /usr/local/include /usr/include/hdf5/serial
LIBRARY_DIRS := $(PYTHON_LIB) /usr/local/lib /usr/lib /usr/lib/x86_64-linux-gnu /usr/lib/x86_64-linux-gnu/hdf5/serial /home/nnir712/anaconda3/envs/skimg/lib/
#/home/nnir712/software/protobufin/include/
# If Homebrew is installed at a non standard location (for example your home directory) and you use it for general dependencies
# INCLUDE_DIRS += $(shell brew --prefix)/include
# LIBRARY_DIRS += $(shell brew --prefix)/lib
# NCCL acceleration switch (uncomment to build with NCCL)
# https://github.com/NVIDIA/nccl (last tested version: v1.2.3-1+cuda8.0)
# USE_NCCL := 1
# Uncomment to use `pkg-config` to specify OpenCV library paths.
# (Usually not necessary -- OpenCV libraries are normally installed in one of the above $LIBRARY_DIRS.)
# USE_PKG_CONFIG := 1
# N.B. both build and distribute dirs are cleared on `make clean`
BUILD_DIR := build
DISTRIBUTE_DIR := distribute
# Uncomment for debugging. Does not work on OSX due to https://github.com/BVLC/caffe/issues/171
# DEBUG := 1
# The ID of the GPU that 'make runtest' will use to run unit tests.
TEST_GPUID := 0
# enable pretty build (comment to see full commands)
Q ?= @
4、编译
make clean # 如果之前编译过的话，清除掉
make all -j8 # j8是使用8个线程，看机子上有几个核
make test -j8
make runtest -j8
make pycaffe -j8
添加环境变量：
`export PYTHONPATH=$PYTHONPATH:/home/nnir712/software/caffe/python/
export CAFFE_ROOT="/home/nnir712/software/caffe/"`
成功！可以测试import caffe是否成功
顺便再安装上opencv：
`pip install opencv-python==3.4.1.15 -i https://pypi.douban.com/simple/
pip install opencv-contrib-python==3.4.1.15 -i https://pypi.douban.com/simple/`
## 问题1：protobuf的问题
fatal error: google/protobuf/port_def.inc: No such file or directory
`sudo apt-get install libprotobuf-dev libleveldb-dev libsnappy-dev libopencv-dev libhdf5-serial-dev protobuf-compiler
sudo apt-get install --no-install-recommends libboost-all-dev
sudo apt-get install libopenblas-dev liblapack-dev libatlas-base-dev
sudo apt-get install libgflags-dev libgoogle-glog-dev liblmdb-dev
sudo apt-get install libprotobuf-dev libleveldb-dev libsnappy-dev libopencv-dev libboost-all-dev libhdf5-serial-dev libgflags-dev libgoogle-glog-dev liblmdb-dev protobuf-compiler libatlas-base-dev
sudo apt-get install python-dev python-pip gfortran`
以上步骤有可能会提示你安装过最近版本的。这种情况不会再安装，用protoc --version查看版本号。看看能否找到protobuf。如果不行的话就先卸载，再安装。
`sudo apt-get remove libprotobuf-dev
sudo apt-get remove protobuf-compiler `
安装：
`sudo apt-get install libprotobuf-dev protobuf-compiler`
## 问题2：python路径
/usr/include/boost/python/detail/wrap_python.hpp:50:11: fatal error: pyconfig.h: 没有那个文件或目录
PYTHON_INCLUDE := $(ANACONDA_HOME)/envs/caffepy36/include \
$(ANACONDA_HOME)/envs/caffepy36/include/python3.6m \
$(ANACONDA_HOME)/envs/caffepy36/lib/python3.6/site-packages/numpy/core/include
发现没有numpy
sudo apt-get remove libboost-all-dev****
/usr/bin/ld: 找不到 -lboost_python36
export PYTHONPATH=$PYTHONPATH:/home/nnir712/software/caffe/python/
export CAFFE_ROOT="/home/nnir712/software/caffe/"
ImportError: libboost_system.so.1.67.0: cannot open shared object file: No such file or directory
[配置了libboost_system.so.1.67.0 但还是显示找不到](https://blog.csdn.net/qq_33144323/article/details/81951308)
`sudo vi /etc/ld.so.conf
添加：/home/nnir712/anaconda3/envs/caffepy36/lib/
sudo ldconfig`
待续
标签：protobuf,lib,安装,dev,cuda10,caffe,anaconda,include,numpy 来源： https://blog.csdn.net/firing00/article/details/96732745