系统相关
首页 > 系统相关> > linux 设备树中 dwc3 节点的phys参数含义

linux 设备树中 dwc3 节点的phys参数含义

作者:互联网

找了好久今天找到了,记录一下:

 

&dwc3_0 {

...

phys = <&lane3 PHY_TYPE_USB3 1 2 26000000>;

...

}

 

Required properties (port (child) nodes):
lane0:
- #phy-cells    : Should be 4
          Cell after port phandle is device type from:
            - <PHY_TYPE_PCIE 0 LANE_NUM FREQUENCY>
            - <PHY_TYPE_SATA 0 LANE_NUM FREQUENCY>
            - <PHY_TYPE_USB3 0 LANE_NUM FREQUENCY>
            - <PHY_TYPE_DP 1 LANE_NUM FREQUENCY>
            - <PHY_TYPE_SGMII 0 LANE_NUM FREQUENCY>
lane1:
- #phy-cells    : Should be 4
          Cell after port phandle is device type from:
            - <PHY_TYPE_PCIE 1 LANE_NUM FREQUENCY>
            - <PHY_TYPE_SATA 1 LANE_NUM FREQUENCY>
            - <PHY_TYPE_USB3 0 LANE_NUM FREQUENCY>
            - <PHY_TYPE_DP 0 LANE_NUM FREQUENCY>
            - <PHY_TYPE_SGMII 1 LANE_NUM FREQUENCY>
lane2:
- #phy-cells    : Should be 4
          Cell after port phandle is device type from:
            - <PHY_TYPE_PCIE 2 LANE_NUM FREQUENCY>
            - <PHY_TYPE_SATA 0 LANE_NUM FREQUENCY>
            - <PHY_TYPE_USB3 0 LANE_NUM FREQUENCY>
            - <PHY_TYPE_DP 1 LANE_NUM FREQUENC>
            - <PHY_TYPE_SGMII 2 LANE_NUM FREQUENCY>
lane3:
- #phy-cells    : Should be 4
          Cell after port phandle is device type from:
            - <PHY_TYPE_PCIE 3 LANE_NUM FREQUENCY>
            - <PHY_TYPE_SATA 1 LANE_NUM FREQUENCY>
            - <PHY_TYPE_USB3 1 LANE_NUM FREQUENCY >
            - <PHY_TYPE_DP 0 LANE_NUM FREQUENCY>
            - <PHY_TYPE_SGMII 3 LANE_NUM FREQUENCY>

Specifying phy control of devices
=================================

Device nodes should specify the configuration required in their "phys"
property, containing a phandle to the phy port node and a device type.

phys = <PHANDLE CONTOLLER_TYPE CONTROLLER_INSTANCE LANE_NUM LANE_FREQ>;

PHANDLE                 = &lane0 or &lane1 or &lane2 or &lane3
CONTROLLER_TYPE         = PHY_TYPE_PCIE or PHY_TYPE_SATA or PHY_TYPE_USB
              or PHY_TYPE_DP or PHY_TYPE_SGMII
CONTROLLER_INSTANCE     = Depends on controller type used, can be any of
                PHY_TYPE_PCIE : 0 or 1 or 2 or 3
                PHY_TYPE_SATA : 0 or 1
                PHY_TYPE_USB  : 0 or 1
                PHY_TYPE_DP   : 0 or 1
                PHY_TYPE_SGMII: 0 or 1 or 2 or 3
LANE_NUM                = Depends on which lane clock is used as ref clk, can be
              0 or 1 or 2 or 3
LANE_FREQ               = Frequency that controller can operate, can be any of
              19.2Mhz,20Mhz,24Mhz,26Mhz,27Mhz,28.4Mhz,40Mhz,52Mhz,
              100Mhz,108Mhz,125Mhz,135Mhz,150Mhz

顺便告诉大家去哪里找其他的设备树上的参数含义:

linux-xlnx-xilinx-v201x.x/Documentation/devicetree/bindings/*** 源码下,明白了吗?

 

标签:dwc3,phys,type,phy,PHY,phandle,linux,TYPE,port
来源: https://www.cnblogs.com/kean0048/p/11084236.html