centos7安装vnc

环境:
OS:Centos 7

前提条件:
系统需要安装相关图形界面的软件包,否则安装vnc后启动不了
yum groupinstall "GNOME Desktop" "Graphical Administration Tools"

或是安装如下的
yum groups install GNOME

查看已经安装的组
yum grouplist

1.安装vnc和vncserver
yum -y install vnc
yum -y install tigervnc-server

2.关闭防火墙
systemctl status firewalld.service 
systemctl stop firewalld.service 
systemctl disable firewalld.service
vi /etc/selinux/config
set "SELINUX=disabled" and comment the rest lines.

以开启1号窗口为例（也可以同时开启多个窗口，修改数字即可），方法如下： 
cp /lib/systemd/system/vncserver@.service /etc/systemd/system/vncserver@:1.service
编辑/etc/systemd/system/vncserver@:1.service,设置用户root相关参数,修改前后内容如下:

 

[root@hxl01 ~]# more /etc/systemd/system/vncserver@:1.service 
# The vncserver service unit file
#
# Quick HowTo:
# 1. Copy this file to /etc/systemd/system/vncserver@.service
# 2. Replace <USER> with the actual user name and edit vncserver
# parameters appropriately
# (ExecStart=/usr/sbin/runuser -l <USER> -c "/usr/bin/vncserver %i"
# PIDFile=/home/<USER>/.vnc/%H%i.pid)
# 3. Run `systemctl daemon-reload`
# 4. Run `systemctl enable vncserver@:<display>.service`
#
# DO NOT RUN THIS SERVICE if your local area network is
# For a secure way of using VNC, you should
# limit connections to the local host and then tunnel from
# the machine you want to view VNC on (host A) to the machine
# whose VNC output you want to view (host B)
#
# [user@hostA ~]$ ssh -v -C -L 590N:localhost:590M hostB
#
# this will open a connection on port 590N of your hostA to hostB's port 590M
# (in fact, it ssh-connects to hostB and then connects to localhost (on hostB).
# See the ssh man page for details on port forwarding)
#
# You can then point a VNC client on hostA at vncdisplay N of localhost and with
# the help of ssh, you end up seeing what hostB makes available on port 590M
#
# Use "-nolisten tcp" to prevent X connections to your VNC server via TCP.
#
# Use "-localhost" to prevent remote VNC clients connecting except when
# doing so through a secure tunnel. See the "-via" option in the
# `man vncviewer' manual page.


[Unit]
Description=Remote desktop service (VNC)
After=syslog.target network.target

[Service]
Type=forking
 
# Clean any existing files in /tmp/.X11-unix environment
ExecStartPre=/bin/sh -c '/usr/bin/vncserver -kill %i > /dev/null 2>&1 || :'
ExecStart=/usr/sbin/runuser -l <USER> -c "/usr/bin/vncserver %i"
PIDFile=/home/<USER>/.vnc/%H%i.pid
ExecStop=/bin/sh -c '/usr/bin/vncserver -kill %i > /dev/null 2>&1 || :'

[Install]
WantedBy=multi-user.target

 

修改为:

[root@hxl01 ~]# more /lib/systemd/system/vncserver@:1.service 
# The vncserver service unit file
#
# Quick HowTo:
# 1. Copy this file to /etc/systemd/system/vncserver@.service
# 2. Replace <USER> with the actual user name and edit vncserver
# parameters appropriately
# (ExecStart=/usr/sbin/runuser -l <USER> -c "/usr/bin/vncserver %i"
# PIDFile=/home/<USER>/.vnc/%H%i.pid)
# 3. Run `systemctl daemon-reload`
# 4. Run `systemctl enable vncserver@:<display>.service`
#
# DO NOT RUN THIS SERVICE if your local area network is
# For a secure way of using VNC, you should
# limit connections to the local host and then tunnel from
# the machine you want to view VNC on (host A) to the machine
# whose VNC output you want to view (host B)
#
# [user@hostA ~]$ ssh -v -C -L 590N:localhost:590M hostB
#
# this will open a connection on port 590N of your hostA to hostB's port 590M
# (in fact, it ssh-connects to hostB and then connects to localhost (on hostB).
# See the ssh man page for details on port forwarding)
#
# You can then point a VNC client on hostA at vncdisplay N of localhost and with
# the help of ssh, you end up seeing what hostB makes available on port 590M
#
# Use "-nolisten tcp" to prevent X connections to your VNC server via TCP.
#
# Use "-localhost" to prevent remote VNC clients connecting except when
# doing so through a secure tunnel. See the "-via" option in the
# `man vncviewer' manual page.


[Unit]
Description=Remote desktop service (VNC)
After=syslog.target network.target

[Service]
Type=simple

# Clean any existing files in /tmp/.X11-unix environment
ExecStartPre=/bin/sh -c '/usr/bin/vncserver -kill %i > /dev/null 2>&1 || :'
ExecStart=/usr/sbin/runuser -l oracle -c "/usr/bin/vncserver %i"
PIDFile=/home/oracle/.vnc/%H%i.pid
ExecStop=/bin/sh -c '/usr/bin/vncserver -kill %i > /dev/null 2>&1 || :'

[Install]
WantedBy=multi-user.target

 

4.更新systemctl以使其生效；
systemctl daemon-reload

5.进入到oracle设置vnc密码
su - oracle
执行vncpasswd，并输入访问密码，操作如下：
$ vncpasswd 
Password:
Verify:

6.启动
然后返回root用户下，以后就可以通过systemd来控制vncserver服务的启停了。
例如，启动服务：
# systemctl start vncserver@:1.service

7.查看状态
systemctl status vncserver@:1.service

8.查看5901端口
[root@host01 /]# ss -nlp|grep 5901

问题：
问题1 vnc连接后老是出现：authentication is required to set the network proxy used for
解决办法：
cd /etc/xdg/autostart/
vi polkit-gnome-authentication-agent-1.desktop
添加：X-GNOME-Autostart-enabled=false
然后重启系统
reboot

或是
1. vi /etc/xdg/autostart/gpk-update-icon.desktop
2. 在底部添加X-GNOME-Autostart-enabled=false

问题2：
取消屏幕保护
Application—System Tools—Setting—Hardware—Power Saving—Blank screen—never

3.问题
[root@host01 ~]# systemctl start vncserver@:2.service
Job for vncserver@:2.service failed because a configured resource limit was exceeded. See "systemctl status vncserver@:2.service" and "journalctl -xe" for details.

解决办法:
[root@host01 ~]# vi /lib/systemd/system/vncserver@:2.service
修改type=simple

4.发现服务状态没有启动但是端口是启动了的
[root@localhost ~]# ss -nlp|grep 5901
tcp    LISTEN     0      5         *:5901                  *:*                   users:(("Xvnc",pid=1883,fd=9))
tcp    LISTEN     0      5      [::]:5901               [::]:*                   users:(("Xvnc",pid=1883,fd=10))
[root@localhost ~]# 
[root@localhost ~]# systemctl status vncserver@:1.service
● vncserver@:1.service - Remote desktop service (VNC)
   Loaded: loaded (/etc/systemd/system/vncserver@:1.service; disabled; vendor preset: disabled)
   Active: inactive (dead)

Oct 22 08:04:17 localhost.localdomain systemd[1]: Starting Remote desktop service (VNC)...
Oct 22 08:04:17 localhost.localdomain systemd[1]: Started Remote desktop service (VNC).
Oct 22 08:04:21 localhost.localdomain systemd[1]: New main PID 1883 does not belong to service, and PID file is not owned by root. Refusing.
[root@localhost ~]# 

5.服务已经启动但是端口没有启动
解决:
rm -rf /tmp/.X*
[root@gaia data]# systemctl daemon-reload
[root@gaia data]# systemctl restart vncserver@:1.service
[root@gaia data]# systemctl status vncserver@:1.service

6.vnc连接黑屏解决办法
su - oracle
cd /home/oracle/.vnc
chmod 777 ./xstartup

 

问题7:

/home/dmdba/.vnc/xstartup: line 5: 27299 Terminated /etc/X11/xinit/xinitrc
Killing Xvnc process ID 27263

解决办法:

yum install mesa*

 

标签：VNC,service,root,vncserver,centos7,systemctl,vnc,安装,localhost
来源： https://www.cnblogs.com/hxlasky/p/16453796.html