java – NTAG212 Mifare Ultralight与身份验证

我是NFC Android的新手,我已经坚持了几天试图通过身份验证获得NTAG212 Mifare Ultralight的第7页,我已经有了PWD和PACK来完成基于NTAG212文档的PWD_AUTH.

我这样做…

//assume password as array of bytes
//assume pack as array of bytes
try{
nfc.connect();
byte[] cmd1 = nfc.transceive(new byte[]{ (byte) 0x30, (byte) 0x00 }); //read the page 0     to make the NFC active
nfc.transceive(new byte[]{
   (byte) 0x1B, //command for PWD_AUTH
   pass[0],
   pass[1],
   pass[2],
   pass[3]
});
byte[] cmd4 = nfc.transceive(new byte[]{ (byte) 0x30, (byte) 0x04 }); //read the page 4
}catch(TagLostException e){
  e.printStackTrace();
}catch(IOException e){
  e.printStachTrace();
}finally{
    try{
        nfc.close();
    }catch(Exception e){
      //display failed to close
    }
}

我总是收到android.nfc.TagLostException：标签丢失了.将PWD_AUTH命令发送到NFC后出错.有人能告诉我我做错了什么吗？我的方法是否正确？请帮忙.

注意：我已经多次阅读过NTAG212的文档,搜索了google,stackoverflow和所有可能的资源.

TIA,
Kenster

解决方法:

您发送到标记的PWD_AUTH命令没有多大意义.

PWD_AUTH命令的想法是,如果使用正确的密码进行身份验证,则发送密码(4字节值)并且标签以其密码确认(PACK)值(2字节值)进行响应.然后,您可以根据预期密码确认来验证PACK值,以“验证”标签.

所以正确的命令是：

byte[] response = nfc.transceive(new byte[] {
    (byte) 0x1B, // PWD_AUTH
    pass[0], pass[1], pass[2], pass[3]
});
if ((response != null) && (response.length >= 2)) {
   byte[] pack = Arrays.copyOf(response, 2);
   // TODO: verify PACK to confirm that tag is authentic (not really,
   // but that whole PWD_AUTH/PACK authentication mechanism was not
   // really meant to bring much security, I hope; same with the
   // NTAG signature btw.)
}

您需要什么才能启用密码保护(在NTAG212上)：

>将PWD(第39页)设置为所需的密码(默认值为0xFFFFFFFF).

byte[] response = nfc.transceive(new byte[] {
    (byte) 0xA2, // WRITE
    (byte) 39,   // page address
    pass[0], pass[1], pass[2], pass[3]
});

>将PACK(第40页,字节0-1)设置为所需的密码确认(默认值为0x0000).

byte[] response = nfc.transceive(new byte[] {
    (byte) 0xA2, // WRITE
    (byte) 40,   // page address
    pack[0], pack[1],   // bytes 0-1 are PACK value
    (byte) 0, (byte) 0  // other bytes are RFU and must be written as 0
});

>将AUTHLIM(第38页,字节0,位2-0)设置为最大失败密码验证尝试次数(将此值设置为0将允许无限次数的PWD_AUTH尝试).
>将PROT(第38页,字节0,位7)设置为所需的值(0 =仅在写访问时需要PWD_AUTH,1 =读和写访问需要PWD_AUTH).

byte[] response = nfc.transceive(new byte[] {
    (byte) 0x30, // READ
    (byte) 38    // page address
});
if ((response != null) && (response.length >= 16)) {  // read always returns 4 pages
    boolean prot = false;  // false = PWD_AUTH for write only, true = PWD_AUTH for read and write
    int authlim = 0; // value between 0 and 7
    response = nfc.transceive(new byte[] {
        (byte) 0xA2, // WRITE
        (byte) 38,   // page address
        (byte) ((response[0] & 0x078) | (prot ? 0x080 : 0x000) | (authlim & 0x007)),
        response[1], response[2], response[3]  // keep old value for bytes 1-3, you could also simply set them to 0 as they are currently RFU and must always be written as 0 (response[1], response[2], response[3] will contain 0 too as they contain the read RFU value)
    });
}

>将AUTH0(第37页,字节3)设置为应该要求密码验证的第一页.

byte[] response = nfc.transceive(new byte[] {
    (byte) 0x30, // READ
    (byte) 37    // page address
});
if ((response != null) && (response.length >= 16)) {  // read always returns 4 pages
    boolean prot = false;  // false = PWD_AUTH for write only, true = PWD_AUTH for read and write
    int auth0 = 0; // first page to be protected, set to a value between 0 and 37 for NTAG212
    response = nfc.transceive(new byte[] {
        (byte) 0xA2, // WRITE
        (byte) 37,   // page address
        response[0], // keep old value for byte 0
        response[1], // keep old value for byte 1
        response[2], // keep old value for byte 2
        (byte) (auth0 & 0x0ff)
    });
}

如果您使用MifareUltralight标记技术,而不是直接使用收发方法,您还可以使用readPages和writePage方法：

> READ命令

byte[] response = nfc.transceive(new byte[] {
    (byte) 0x30,                  // READ
    (byte) (pageAddress & 0x0ff)  // page address
});

是等价的

byte[] response = nfc.readPages(pageAddress);

> WRITE命令

byte[] data = { (byte)..., (byte)..., (byte)..., (byte)... };
byte[] response = nfc.transceive(new byte[] {
    (byte) 0xA2,                  // WRITE
    (byte) (pageAddress & 0x0ff), // page address
    data[0], data[1], data[2], data[3]
});

是等价的

nfc.writePage(pageAddress, data);

标签：android,java,authentication,nfc,mifare
来源： https://codeday.me/bug/20190928/1829257.html