首页 > 其他分享> > istio安全模块之网格内流量与网关入站流量

istio安全模块之网格内流量与网关入站流量

2021-04-23 20:57:27 作者：互联网

本文使用istio版本为v1.9.2。

Istio安全架构图如下：

从图中可知安全方面主要集中在以下几个方面：

终端用户基于JWT的身份认证方案；
经网关(ingress/egress)的流量安全；
网格内部的流量安全(认证，授权)；
Istio自身的安全方案；

一、网格内部流量

1. 自动双向TLS

除非显示的指定，否则通过官方的配置(default/demo等)安装的istio，均默认开启了双向TLS认证(mtls, mutual TLS)，正如"Istio安全架构图"中展示的，网格内服务间通信时双方的envoy代理数据是被TLS加密的。

源码部分可参考github，默认mTLS配置被置为true:

EnableAutoMtls: &types.BoolValue{Value: true},

具体配置可参考官网释义。

老版本通过Values.global.mtls.enabled和Values.global.mtls.auto来配置，新版本替换为'PeerAuthentication和meshConfig.enableAutoMtls，参见github。

默认情况下istio使用自生成的证书与密钥等进行mTLS加密，并根据认证等策略异步发送配置到目标端点。代理收到配置后，新的认证要求会立即生效。

a. 实例验证

分别创建full,part,legacy三个命名空间，分别部署httpbin与sleep服务，除了legacy之外其他均注入边车。

 # kubectl create ns full
 # kubectl apply -f <(istioctl kube-inject -f samples/httpbin/httpbin.yaml) -n full
 # kubectl apply -f <(istioctl kube-inject -f samples/sleep/sleep.yaml) -n full
 # kubectl create ns part
 # kubectl apply -f <(istioctl kube-inject -f samples/httpbin/httpbin.yaml) -n part
 # kubectl apply -f <(istioctl kube-inject -f samples/sleep/sleep.yaml) -n part
 # kubectl create ns legacy
 # kubectl apply -f samples/httpbin/httpbin.yaml -n legacy
 # kubectl apply -f samples/sleep/sleep.yaml -n legacy

若流量被istio双向TLS加密，则代理自动在消息头中添加了X-Forwarded-Client-Cer，可通过httpbin服务的/headers查看。

 # kubectl -nfull exec -it deploy/sleep -- curl -s http://httpbin.part:8000/headers | grep X-Forwarded-Client-Cert
     "X-Forwarded-Client-Cert": "By=spiffe://cluster.local/ns/full/sa/httpbin;Hash=aa013048768c74c5289c2ae4bbab4f944cb878d13e7dee78aa75d7b7930a34fc;Subject=\"\";URI=spiffe://cluster.local/ns/full/sa/sleep"

通过以下循环，使得三个命名空间下的服务进行互相访问测试，均能正常访问：

# for from in "full" "part" "legacy"; do for to in "full" "part" "legacy"; do echo -e "sleep.${from} to httpbin.${to}";kubectl exec "$(kubectl get pod -l app=sleep -n ${from} -o jsonpath={.items..metadata.name})" -c sleep -n ${from} -- curl "http://httpbin.${to}:8000/headers" -s  -w "response code: %{http_code}" | egrep -o 'URI\=spiffe.*sa/[a-z]*|response.*$';echo  ; done; done
 sleep.full to httpbin.full
 URI=spiffe://cluster.local/ns/full/sa/sleep  # 双向mTLS
 response code: 200
 
 sleep.full to httpbin.part
 URI=spiffe://cluster.local/ns/full/sa/sleep  # 双向mTLS
 response code: 200
 
 sleep.full to httpbin.legacy                 # 宽容模式，明文
 response code: 200
 
 sleep.part to httpbin.full
 URI=spiffe://cluster.local/ns/part/sa/sleep  # 双向mTLS
 response code: 200
 
 sleep.part to httpbin.part
 URI=spiffe://cluster.local/ns/part/sa/sleep  # 双向mTLS
 response code: 200
 
 sleep.part to httpbin.legacy                 # 宽容模式，明文
 response code: 200
 
 sleep.legacy to httpbin.full                 # 宽容模式，明文
 response code: 200
 
 sleep.legacy to httpbin.part                 # 宽容模式，明文
 response code: 200
 
 sleep.legacy to httpbin.legacy               # 宽容模式，明文
 response code: 200

从测试结果来看，只有互相具备代理容器的服务相互访问才被添加了mTLS，其他情况下流量均为被加密。

这是istio具备的一种特殊模式：宽容模式（permissive mode）。

2. 同级认证策略

宽容模式也是在双向TLS中默认开启的，允许网格内服务同时接受纯文本流量和双向 TLS 流量，由代理自动识别并决定是否加密(两个http服务都携带边车，两者边车默认mTLS通信；当其中一个服务不携带边车，两者也能通信，通过明文)。

宽容模式是istio自定义资源PeerAuthentication(PA，同级认证)中的配置项，模式可配置为禁用(仅明文)，严格(仅mTLS)，宽容，未配置(若父级有配置则继承，否则宽容模式)。

认证策略为在 Istio 网格中接收请求的工作负载指定认证要求。事实上，Pa资源只是用来管理接收端是否启用TLS认证，并没有携带身份认证方面的信息，认证信息通过RequestAuthentication资源进行配置。

Pa资源主要用于为命名空间或特定工作负载配置认证模式，通过namespace与selector字段协同配置：

namespace为根命名空间，selector为空或不配置：整个网格生效的配置；
namespace为特定命名空间，selector为空或不配置：特定命名空间下生效的配置；
namespace为特定命名空间，selector不为空：特定工作负载下生效的配置；

Istio 按照以下顺序为每个工作负载应用最窄的匹配策略：

特定于工作负载的
命名空间范围
网格范围

不同级别的策略配置可以认为是一种父子关系，可用于继承。

a. 特定范围同级认证

在根命名空间创建STRICT模式的PA，

 # kubectl apply -f - <<EOF
 apiVersion: "security.istio.io/v1beta1"
 kind: "PeerAuthentication"
 metadata:
   name: "default"
   namespace: "istio-system"
 spec:
   mtls:
     mode: STRICT  # 使用mTLS通道的连接
 EOF

运行稍作改动的上述命令：

 # for from in "full" "part" "legacy"; do for to in "full" "part" "legacy"; do kubectl exec "$(kubectl get pod -l app=sleep -n ${from} -o jsonpath={.items..metadata.name})" -c sleep -n ${from} -- curl "http://httpbin.${to}:8000/ip" -s -o /dev/null -w "sleep.${from} to httpbin.${to}: %{http_code}\n"; done; done
 sleep.full to httpbin.full: 200
 sleep.full to httpbin.part: 200
 sleep.full to httpbin.legacy: 200
 sleep.part to httpbin.full: 200
 sleep.part to httpbin.part: 200
 sleep.part to httpbin.legacy: 200
 sleep.legacy to httpbin.full: 000
 command terminated with exit code 56
 sleep.legacy to httpbin.part: 000
 command terminated with exit code 56
 sleep.legacy to httpbin.legacy: 200

由于认证策略为在 Istio 网格中接收请求的工作负载(上游主机)指定认证要求，因此mTLS模式下携带边车代理的服务不能接收明文流量，连接被重置，curl客户端异常退出。

curl: (56) Recv failure: Connection reset by peer command terminated with exit code 56

在特定命名空间范围设置STRICT模式的PA，同理。

若有使用场景为出站mTLS流量的工作负载指定负载级别认证策略，则需要结合PA与DR，如：

 apiVersion: "networking.istio.io/v1alpha3"
 kind: "DestinationRule"
 metadata:
   name: "httpbin"
 spec:
   host: "httpbin.part.svc.cluster.local"
   trafficPolicy:
     tls:
       mode: DISABLE

其中的tls.mode参见官网，当为ISTIO_MUTUAL代表使用istio自身管理的证书等进行加密管理，DISABLE代表禁用TLS连接。

运行上述命令进行测试：

# for from in "full" "part" "legacy"; do for to in "full" "part" "legacy"; do kubectl exec "$(kubectl get pod -l app=sleep -n ${from} -o jsonpath={.items..metadata.name})" -c sleep -n ${from} -- curl "http://httpbin.${to}:8000/ip" -s -o /dev/null -w "sleep.${from} to httpbin.${to}: %{http_code}\n"; done; done
 sleep.full to httpbin.full: 200
 sleep.full to httpbin.part: 503
 sleep.full to httpbin.legacy: 200
 sleep.part to httpbin.full: 200
 sleep.part to httpbin.part: 503
 sleep.part to httpbin.legacy: 200
 sleep.legacy to httpbin.full: 000
 command terminated with exit code 56
 sleep.legacy to httpbin.part: 000
 command terminated with exit code 56
 sleep.legacy to httpbin.legacy: 200

在另一篇描述503的文章中提到，当网格内服务TLS配置冲突时，请求以503状态码返回客户端(示例中表现为part被配置接收mTLS流量，但是发送过来的流量又是明文)。由于legacy未配置边车，因此DR资源不能对其命名空间下的服务生效，仍然以错误码56退出。

注意：通过上例可知，通过DR资源这种配置边车达到的mTLS禁用，与不携带边车默认的http明文是不一样的。

再次修改策略，使满足如下条件：

 # kubectl get -A pa
 NAMESPACE      NAME      MODE      AGE
 istio-system   default   STRICT    134m    # 全局设置mTLS
 part           default   DISABLE   2m31s   # part命名空间禁用mTLS
 # kubectl get -A dr
 NAMESPACE   NAME      HOST               AGE
 part        default   httpbin.part.svc   15m # 仅对目标'httpbin.part.svc'禁用mTLS
 # for from in "full" "part" "legacy"; do for to in "full" "part" "legacy"; do echo -e "sleep.${from} to httpbin.${to}";kubectl exec "$(kubectl get pod -l app=sleep -n ${from} -o jsonpath={.items..metadata.name})" -c sleep -n ${from} -- curl "http://httpbin.${to}:8000/headers" -s  -w "response code: %{http_code}" | egrep -o 'URI\=spiffe.*sa/[a-z]*|response.*$';echo  ; done; done
 sleep.full to httpbin.full
 URI=spiffe://cluster.local/ns/full/sa/sleep  # full到full为mTLS
 response code: 200
 
 sleep.full to httpbin.part                   # full到part为明文，因为pa.part
 response code: 200
 
 sleep.full to httpbin.legacy                 # 明文，因为legacy无边车
 response code: 200
 
 sleep.part to httpbin.full                   # mTLS，因为全局mTLS
 URI=spiffe://cluster.local/ns/part/sa/sleep
 response code: 200
 
 sleep.part to httpbin.part                   # 明文，因为pa.part和dr.part
 response code: 200
 
 sleep.part to httpbin.legacy                 # 明文，因为legacy无边车
 response code: 200
 
 sleep.legacy to httpbin.full                 # 错误，因为legacy明文，full为mTLS
 command terminated with exit code 56
 response code: 000
 
 sleep.legacy to httpbin.part                 # 明文，因为part仅接收明文
 response code: 200
 
 sleep.legacy to httpbin.legacy               # 明文
 response code: 200

上述示例结果确认了Pa策略为接收请求的工作负载生效，Dr资源为发送目的地的流量生效策略。

b. 特定端口认证策略

通过PA与DR，还可以为特定端口设置认证策略：

 apiVersion: "security.istio.io/v1beta1"
 kind: "PeerAuthentication"
 metadata:
   name: "httpbin"
   namespace: "part"
 spec:
   selector:
     matchLabels:
       app: httpbin
   mtls:
     mode: STRICT
   portLevelMtls:
     80:            # pod或container中的端口
       mode: DISABLE
 ---
 apiVersion: "networking.istio.io/v1alpha3"
 kind: "DestinationRule"
 metadata:
   name: "httpbin"
   namespace: "part"
 spec:
   host: httpbin.part.svc.cluster.local
   trafficPolicy:
     tls:
       mode: ISTIO_MUTUAL
     portLevelSettings:
     - port:
         number: 8000     # svc中的端口
       tls:
         mode: DISABLE

再次进行验证：

 # for from in "full" "part" "legacy"; do for to in "full" "part" "legacy"; do kubectl exec "$(kubectl get pod -l app=sleep -n ${from} -o jsonpath={.items..metadata.name})" -c sleep -n ${from} -- curl "http://httpbin.${to}:8000/ip" -s -o /dev/null -w "sleep.${from} to httpbin.${to}: %{http_code}\n"; done; done
 sleep.full to httpbin.full: 200
 sleep.full to httpbin.part: 200
 sleep.full to httpbin.legacy: 200
 sleep.part to httpbin.full: 200
 sleep.part to httpbin.part: 200
 sleep.part to httpbin.legacy: 200
 sleep.legacy to httpbin.full: 000
 command terminated with exit code 56
 sleep.legacy to httpbin.part: 200
 sleep.legacy to httpbin.legacy: 200

此时，legacy下的服务能够以明文的方式访问part下的httpbin服务，因为特定端口已经配置为明文发送。

需要注意的是，PA资源中指定的端口是pod或container中的端口号，而DR中指定的是service中的端口号(一般情况下都是填的service的端口)。

 apiVersion: v1
 kind: Service
 metadata:
   labels:
     app: httpbin
   name: httpbin
 spec:
   ports:
   - name: http
     port: 8000
     protocol: TCP
     targetPort: 80
   selector:
     app: httpbin

c. 切换认证策略

若存在策略的更新，由于istio几乎实时将新策略推送到工作负载。但是，Istio 无法保证所有工作负载都同时收到新政策。

因此在同级认证策略进行切换时，最好使用宽容模式作为过渡。

二、网关入站流量

Istio默认提供Ingress Gateway用于部署在网格边缘，通过配置Gateway资源来管理进入集群的流量。

安全网关支持通过Istio的Secret 发现服务（SDS）完成配置，当为多个主机或访问入口域名配置网关入口时，无需重启网关pod，可以动态新增、删除或者更新证书等配置。

该功能在老版本需要显示开启，在1.9版本中默认开启。

Istio支持一下不同格式的secret格式：

下文例子中使用的键名为tls.key和tls.crt，双向TLS的ca使用ca.crt；
键名为key和cert，双向TLS的ca使用cacert；
名为<secret>中键名为key和cert，另一个单独的secret命名为<secret>-cacert，其中ca键名为cacert；

1. http服务配置TLS网关

为full命名空间下的httpbin服务生成双向客户端、服务端认证证书(其中服务端域名指定为httpbin.example.com)，HTTPS证书生成及相关参见网络。

在istio-system(istio-ingressgateway所在的命名空间)下创建响应的secret：

 kubectl create -n istio-system secret generic httpbin-credential --from-file=tls.key=httpbin.key \
 --from-file=tls.crt=httpbin.crt --from-file=ca.crt=ca.crt

根据官方示例找出环境变量INGRESS_HOST和SECURE_INGRESS_PORT，为httpbin服务创建网关与虚拟服务：

apiVersion: networking.istio.io/v1alpha3
 kind: Gateway
 metadata:
   name: httpsgw
 spec:
   selector:
     istio: ingressgateway # use istio default ingress gateway
   servers:
     - port:
         number: 443
         name: https
         protocol: HTTPS
       tls:
         mode: MUTUAL
         credentialName: httpbin-credential # must be the same as secret
       hosts:
         - httpbin.example.com
 ---
 apiVersion: networking.istio.io/v1alpha3
 kind: VirtualService
 metadata:
   name: httpbin
 spec:
   hosts:
     - "httpbin.example.com"
   gateways:
     - httpsgw
   http:
     - match:
         - uri:
             prefix: /status
         - uri:
             prefix: /delay
       route:
         - destination:
             port:
               number: 8000   # service端口
             host: httpbin

通过一台机子访问网关：

 # curl -s -HHost:httpbin.example.com --resolve "httpbin.example.com:$SECURE_INGRESS_PORT:$INGRESS_HOST" --cacert ./ca.crt --cert ./client.crt --key ./client.key "https://httpbin.example.com:$SECURE_INGRESS_PORT/status/418"
     -=[ teapot ]=-
        _...._
      .'  _ _ `.
     | ."` ^ `". _,
     \_;`"---"`|//
       |       ;/
       \_     _/
         `"""`

注意：原httpbin服务在网格内其实是http服务，通过网关添加了一层TLS使得入站请求必须为HTTPS请求，但是可以使用istio针对http的所有丰富的流量管理功能。

2. 动态为多主机配置TLS网关

在同一命名空间下部署另一个http服务：

 apiVersion: v1
 kind: Service
 metadata:
   name: goserver
 spec:
   ports:
   - name: http
     port: 9091
     protocol: TCP
     targetPort: 8081
   selector:
     app: goserver
 ---
 apiVersion: apps/v1
 kind: Deployment
 metadata:
   name: goserver
 spec:
   replicas: 1
   template:
     metadata:
       labels:
         app: goserver
     spec:
       containers:
       - image: goserver:v1.0.1
         name: goserver
         ports:
         - containerPort: 8081
           protocol: TCP

验证默认情况下在网格内是以http请求进行访问的：

# kubectl -nfull get po
 NAME                       READY   STATUS    RESTARTS   AGE
 goserver-69f9c9f89-tqs52   2/2     Running   0          17h
 httpbin-66cdbdb6c5-vhkdl   2/2     Running   2          6d22h
 sleep-865cdd767b-6qtwg     2/2     Running   0          47h
# kubectl -nfull exec deploy/sleep -- curl goserver:9091/healthz -s
 {"status":"healthy","hostName":"goserver-69f9c9f89-tqs52"}

用之前的ca证书为这个服务签发双向客户端、服务端认证证书(其中服务端域名指定为go.example.com)，在istio-system(istio-ingressgateway所在的命名空间)下创建响应的secret：

 kubectl create -n istio-system secret generic go-credential --from-file=tls.key=goserver.key \
 --from-file=tls.crt=goserver.crt --from-file=ca.crt=ca.crt

为goserver服务创建网关与虚拟服务：

 apiVersion: networking.istio.io/v1alpha3
 kind: Gateway
 metadata:
   name: httpsgw
 spec:
   selector:
     istio: ingressgateway # use istio default ingress gateway
   servers:
     - port:
         number: 443
         name: https
         protocol: HTTPS
       tls:
         mode: MUTUAL
         credentialName: httpbin-credential # must be the same as secret
       hosts:
         - httpbin.example.com
     - port:
         number: 443
         name: https-go   # 名称确保唯一，不能与上述其他名称重复
         protocol: HTTPS
       tls:
         mode: MUTUAL
         credentialName: go-credential # must be the same as secret
       hosts:
         - go.example.com
 ---
 apiVersion: networking.istio.io/v1alpha3
 kind: VirtualService
 metadata:
   name: goserver
 spec:
   hosts:
     - go.example.com
   gateways:
     - httpsgw
   http:
     - match:
         - uri:
             exact: /healthz
       route:
         - destination:
             host: goserver
             port:
               number: 9091

应用上述配置之后，尝试访问前期的两个服务：

 # curl -s -HHost:go.example.com --resolve "go.example.com:$SECURE_INGRESS_PORT:$INGRESS_HOST" --cacert ./ca.crt --cert ./client.crt --key ./client.key "https://go.example.com:$SECURE_INGRESS_PORT/healthz"
 {"status":"healthy","hostName":"goserver-69f9c9f89-tqs52"}
 # curl -s -HHost:httpbin.example.com --resolve "httpbin.example.com:$SECURE_INGRESS_PORT:$INGRESS_HOST" --cacert ./ca.crt --cert ./client.crt --key ./client.key "https://httpbin.example.com:$SECURE_INGRESS_PORT/status/418"
     -=[ teapot ]=-
     ... ...

3. https服务配置透传网关

若网格内的服务自身已配置为https服务，则网关就没有必要再次进行TLS加密，此时就可以使用网关的透传模式。

# 简略版
 kind: Service
 metadata:
   name: nginx-https
 spec:
   ports:
   - port: 443
     name: https
 ---
 kind: Deployment
 metadata:
   name: nginx-https
 spec:
     spec:
       containers:
       - image: ymqytw/nginxhttps:1.5
         volumeMounts:
           - mountPath: /etc/nginx/ssl
             name: secret-volume
           - mountPath: /etc/nginx/conf.d
             name: configmap-volume
       volumes:
         - name: secret-volume
           secret:
             secretName: nginx-https
         - name: configmap-volume
           configMap:
             name: nginx-https
 ---
 apiVersion: v1
 kind: ConfigMap
 metadata:
   name: nginx-https
 data:
   default.conf: |-
     server {
             listen 443 ssl;
             ssl on;
             ssl_certificate /etc/nginx/ssl/server.crt;      #配置证书位置
             ssl_certificate_key /etc/nginx/ssl/server.key;  #配置秘钥位置
             ssl_client_certificate /etc/nginx/ssl/ca.crt;   #双向认证
             ssl_verify_client on;                           #双向认证
     }
 ---
 kind: Secret
 metadata:
   name: nginx-https
 type: generic
 data:
   server.crt: xxx
   server.key: yyy
   ca.crt: zzz

先在本机验证服务正常且为https服务(此处以nodeport的方式自解析，证书域名为nginx.example.com)：

 # curl -HHost:nginx.example.com --resolve "nginx.example.com:24755:1xx.xx.xx.184"  --cacert ./ca.crt --cert ./client.crt --key ./client.key https://nginx.example.com:24755 -I
 HTTP/1.1 200 OK
 Server: nginx/1.11.3

以透传方式配置网关：

apiVersion: networking.istio.io/v1alpha3
 kind: Gateway
 metadata:
   name: gw-pt
 spec:
   selector:
     istio: ingressgateway # use istio default ingress gateway
   servers:
     - port:
         number: 443
         name: https
         protocol: HTTPS
       tls:
         mode: PASSTHROUGH
       hosts:
         - nginx.example.com
 ---
 apiVersion: networking.istio.io/v1alpha3
 kind: VirtualService
 metadata:
   name: nginx-https
 spec:
   hosts:
     - nginx.example.com
   gateways:
     - gw-pt
   tls:
     - match:
         - port: 443
           sniHosts:
             - nginx.example.com
       route:
         - destination:
             host: nginx-https    # svc name
             port:
               number: 443        # svc port

再以网关为入口进行访问测试：

 # curl -I -HHost:nginx.example.com --resolve "nginx.example.com:$SECURE_INGRESS_PORT:$INGRESS_HOST" --cacert ./ca.crt --cert ./client.crt --key ./client.key "https://nginx.example.com:$SECURE_INGRESS_PORT/"
 HTTP/1.1 200 OK
 Server: nginx/1.11.3

Istio安装模块其他功能等后续有时间再补充。

标签：200,网关,full,httpbin,istio,流量,legacy,part,sleep
来源： https://blog.csdn.net/a605692769/article/details/116070208