其他分享
首页 > 其他分享> > 【网络通信 -- WebRTC】项目实战记录 -- Janus 环境搭建

【网络通信 -- WebRTC】项目实战记录 -- Janus 环境搭建

作者:互联网

【网络通信 -- WebRTC】项目实战记录 -- Janus 环境搭建

【1】安装准备

【1.1】安装依赖

安装 aptitu
sudo apt-get install aptitude

sudo aptitude install libmicrohttpd-dev libjansson-dev libnice-dev \
    libssl1.0.1-dev libsrtp-dev libsofia-sip-ua-dev libglib2.3.4-dev \
    libopus-dev libogg-dev libcurl4-openssl-dev pkg-config gengetopt \
    libtool automake
    
sudo apt install cmake
sudo aptitude install libconfig-dev
sudo aptitude install libssl-dev
sudo aptitude install doxygen graphviz
sudo aptitude install libavcodec-dev libavformat-dev libswscale-dev libavutil-dev

【2】Janus 插件选择与安装

janus 支持插件式功能安装,根据需求选择安装

安装插件如下

libwebsockets(支持 WebSocket)
libsrtp 和 libusrsctp(音视频流传输控制和数据协议支持)
libmicrohttpd(支持 http/https)
Janus
nginx(提供 web 服务)

【2.1】libwebsockets

git clone https://github.com/warmcat/libwebsockets.git
cd libwebsockets
git checkout v3.2-stable 
mkdir build
cd build
cmake -DCMAKE_INSTALL_PREFIX:PATH=/usr -DCMAKE_C_FLAGS="-fpic" ..
make
make install

【2.2】libsrtp

wget https://github.com/cisco/libsrtp/archive/v2.2.0.tar.gz
tar xfv v2.2.0.tar.gz
cd libsrtp-2.2.0
./configure --prefix=/usr --enable-openssl
make shared_library 
make install

【2.3】libusrsctp

git clone https://github.com/Kurento/libusrsctp.git
cd libusrsctp
./bootstrap
./configure
make
make install

【2.4】libmicrohttpd

wget https://ftp.gnu.org/gnu/libmicrohttpd/libmicrohttpd-0.9.71.tar.gz
tar zxf libmicrohttpd-0.9.71.tar.gz
cd libmicrohttpd-0.9.71/
./configure
make
make install

【2.5】Janus

git clone https://github.com/meetecho/janus-gateway.git
git  checkout v0.10.4
sh autogen.sh
./configure --prefix=/opt/janus --enable-websockets --enable-post-processing --enable-docs --enable-rest --enable-data-channels
make
make install

【2.6】Nginx

【2.6.0】下载 nginx-rtmp-module

wget https://github.com/arut/nginx-rtmp-module/archive/master.zip
unzip master.zip

【2.6.1】安装 Nginx

wget http://nginx.org/download/nginx-1.15.8.tar.gz
tar xvzf nginx-1.15.8.tar.gz
cd nginx-1.15.8/
./configure --prefix=/usr/local/nginx --add-module=../nginx-rtmp-module-master --with-http_ssl_module
make
make install

【2.6.2】生成签名证书

mkdir -p ~/cert
cd ~/cert
# CA私钥
openssl genrsa -out key.pem 2048
# 自签名证书
openssl req -new -x509 -key key.pem -out cert.pem -days 1095

【2.6.3】配置 Nginx

vim /usr/local/nginx/conf/nginx.conf

修改配置文件如下

# 开启 HTTPS 功能
server {
    listen       443 ssl;
	server_name  localhost;
	ssl_certificate      自己的证书路径/cert.pem;   #自己的证书
	ssl_certificate_key  自己的证书路径/key.pem;
	ssl_session_cache    shared:SSL:1m;
	ssl_session_timeout  5m;
	ssl_ciphers  HIGH:!aNULL:!MD5;
	ssl_prefer_server_ciphers  on;
	location / { 
		root   /opt/janus/share/janus/demos;  #web网页打开时,定位到这里
		index  index.html index.htm;
	}
}

# 开启 RTMP 功能
rtmp {  
    server {  
        listen 1900;  
        application myapp {  
            live on;  
        }
    }  
}

【2.6.4】Nginx 启停指令

# 启动和关闭nginx
sudo /usr/local/nginx/sbin/nginx
sudo /usr/local/nginx/sbin/nginx -s  stop

【2.6.5】Nginx 测试

【3】运行 Janus 官方 DEMO

备份 Janus 配置文件

cd /opt/janus/etc/janus
sudo cp janus.jcfg.sample janus.jcfg
sudo cp janus.transport.http.jcfg.sample janus.transport.http.jcfg
sudo cp janus.transport.websockets.jcfg.sample janus.transport.websockets.jcfg
sudo cp janus.plugin.videoroom.jcfg.sample janus.plugin.videoroom.jcfg
sudo cp janus.transport.pfunix.jcfg.sample janus.transport.pfunix.jcfg
sudo cp janus.plugin.streaming.jcfg.sample janus.plugin.streaming.jcfg
sudo cp janus.plugin.recordplay.jcfg.sample janus.plugin.recordplay.jcfg
sudo cp janus.plugin.voicemail.jcfg.sample janus.plugin.voicemail.jcfg
sudo cp janus.plugin.sip.jcfg.sample janus.plugin.sip.jcfg
sudo cp janus.plugin.nosip.jcfg.sample janus.plugin.nosip.jcfg

修改 janus.transport.http.jcfg 以开启 https 和增加证书

general: {
        #events = true                                  # Whether to notify event handlers about transport events (default=true)
        json = "indented"                               # Whether the JSON messages should be indented (default),
                                                                        # plain (no indentation) or compact (no indentation and no spaces)
        base_path = "/janus"                    # Base path to bind to in the web server (plain HTTP only)
        threads = "unlimited"                   # unlimited=thread per connection, number=thread pool
        http = true                                             # Whether to enable the plain HTTP interface
        port = 8088                                             # Web server HTTP port
        #interface = "eth0"                             # Whether we should bind this server to a specific interface only
        #ip = "192.168.0.1"                             # Whether we should bind this server to a specific IP address (v4 or v6) only
        https = true                                    # Whether to enable HTTPS (default=false)
        secure_port = 8089                              # Web server HTTPS port, if enabled
        #secure_interface = "eth0"              # Whether we should bind this server to a specific interface only
        #secure_ip = "192.168.0.1"              # Whether we should bind this server to a specific IP address (v4 or v6) only
        #acl = "127.,192.168.0."                # Only allow requests coming from this comma separated list of addresses
}

certificates: {
        cert_pem = "自己的证书路径/cert.pem"
        cert_key = "自己的证书路径/key.pem"
        #cert_pwd = "secretpassphrase"
        #ciphers = "PFS:-VERS-TLS1.0:-VERS-TLS1.1:-3DES-CBC:-ARCFOUR-128"
}

修改 janus.transport.websockets.jcfg 以开启 wss 和增加证书

general: {
        #events = true                                  # Whether to notify event handlers about transport events (default=true)
        json = "indented"                               # Whether the JSON messages should be indented (default),
                                                                        # plain (no indentation) or compact (no indentation and no spaces)
        #pingpong_trigger = 30                  # After how many seconds of idle, a PING should be sent
        #pingpong_timeout = 10                  # After how many seconds of not getting a PONG, a timeout should be detected

        ws = true                                               # Whether to enable the WebSockets API
        ws_port = 8188                                  # WebSockets server port
        #ws_interface = "eth0"                  # Whether we should bind this server to a specific interface only
        #ws_ip = "192.168.0.1"                  # Whether we should bind this server to a specific IP address only
        wss = true                                              # Whether to enable secure WebSockets
        wss_port = 8989                         # WebSockets server secure port, if enabled
        #wss_interface = "eth0"                 # Whether we should bind this server to a specific interface only
        #wss_ip = "192.168.0.1"                 # Whether we should bind this server to a specific IP address only
        #ws_logging = "err,warn"                # libwebsockets debugging level as a comma separated list of things
                                                                        # to debug, supported values: err, warn, notice, info, debug, parser,
                                                                        # header, ext, client, latency, user, count (plus 'none' and 'all')
        #ws_acl = "127.,192.168.0."             # Only allow requests coming from this comma separated list of addresses
}

certificates: {
        cert_pem = "自己的证书路径/cert.pem"
        cert_key = "自己的证书路径/key.pem"
        #cert_pwd = "secretpassphrase"
}

修改 Janus demo 增加 wss 支持

vim /opt/janus/share/janus/demos/videoroomtest.js

var server = null;
if(window.location.protocol === 'http:')
        server = "http://" + window.location.hostname + ":8088/janus";
else
        #server = "https://" + window.location.hostname + ":8089/janus";
        server = "wss://" + window.location.hostname + ":8989";

启动 Janus

/opt/janus/bin/janus --debug-level=5 --log-file=$HOME/janus-log

问题与解决方案

问题一

configure: error: Package requirements (libcrypto >= 1.0.1) were not met:

解决方案

安装 openssl,注意添加 shared 标识标识强制生成动态库,否则会出现静态库链接生成动态库的错误

wget https://www.openssl.org/source/openssl-1.0.2l.tar.gz
tar xf openssl-1.0.2l.tar.gz
cd openssl-1.0.2l
sudo ./config --prefix=/usr/local/ssl --openssldir=/usr/local/ssl shared zlib
make && make install

设置 PKG_CONFIG_PATH 环境变量

export PKG_CONFIG_PATH=/usr/local/ssl/lib/pkgconfig/:$PKG_CONFIG_PATH

参考致谢

本博客为博主的学习实践总结,并参考了众多博主的博文,在此表示感谢,博主若有不足之处,请批评指正。

【1】Ubuntu16.04 中 搭建Janus Server

【2】ubuntu安装python3.7,并更新python默认指向为python3.7

【3】ubuntu18.04 安装新版本openssl

标签:--,sudo,Janus,dev,server,jcfg,janus,WebRTC
来源: https://blog.csdn.net/qq_27788177/article/details/113556985