大数据平台CDH5.16.2 安装配置

标签（空格分隔）： 大数据平台构建

---

• 一： 环境初始化
• 二： 安装CDH5.16.2

---

1.1: 系统环境介绍

系统： RHEL7.7X64

cat /etc/hosts 
---
192.168.100.21   rhel01.flyfish
192.168.100.22   rhel02.flyfish
192.168.100.23   rhel03.flyfish
192.168.100.24   rhel04.flyfish

-----

本次 安装只配置其中三台机器： 192.168.100.21到 192.168.100.23 

1.2: 关闭 firewalld，iptables 与 selinux

 yum install -y firewall* iptable* 
  (1) 关闭firewalld
 systemctl stop firewalld.service
 systemctl disable firewalld.service
 firewall-cmd --state
 (2) 关闭iptables 
 iptables -F
 systemctl stop iptables.service 
 service iptables save
 systemctl disable iptables.service 
 (3) 禁用 selinux 
  sed -i '/SELINUX/s/enforcing/disabled/' /etc/selinux/config  
  setenforce 0
  getenforce 0
  sestatus
  重启机器
   reboot

1.3:无密钥登录配置

做root用户无密钥认证
 ssh-keygen ---一直敲回车到最后
 cat id_rsa.pub >> authorized_keys 
 将所有的公钥导入authorized_keys  分发到 所有的 机器的.ssh/ 下面
 然后测试

1.4 配置jdk1.8环境 （所有机器都配置）

1): 卸载原来的jdk
rpm -e java-1.8.0-openjdk-headless-1.8.0.242.b08-0.el7_7.x86_64 javapackages-tools-3.4.1-11.el7.noarch tzdata-java-2019c-1.el7.noarch python-javapackages-3.4.1-11.el7.noarch postgresql-jdbc-javadoc-9.2.1002-6.el7_5.noarch --nodeps

2) 安装 jdk:

rpm -ivh jdk-8u162-linux-x64.rpm

vim /etc/profile 

最后增加：

### JDK ####

export JAVA_HOME=/usr/java/jdk1.8.0_162
export CLASSPATH=.:$JAVA_HOME/jre/lib:$JAVA_HOME/lib:$JAVA_HOME/lib/tools.jar
PATH=$PATH:$HOME/bin:$JAVA_HOME/bin
---

java -version 

1.5：chrony 时间同步服务器

所有机器 yum install chrony*
1. rhel01.flyfish:
vim /etc/chrony.conf 增加
----
注释掉相关默认的server
server ntp1.aliyun.com iburst
allow 192.168.100.0.0/16
service chronyd start
chkconfig chronyd on 
2. rhel02.flyfish---rhel03.flyfish 同步rhel01.flyfish
vim /etc/chrony.conf
----
注释掉默认的server
server 192.168.100.21 iburst
----
service chronyd start 
chkconfig chronyd on 

1.6: 安装maridb-server 数据库

1）安装mariadb-server
yum install -y mariadb*

2) 启动 mariadb-server

service mariadb start 
chkcofig mariadb on 

3) 配置数据库密码：

mysql_secure_installation

4） 登录mariadb-server 数据库

   mysql -uroot -pflyfish225

---

1.8 关于系统参数配置

vim /etc/sysctl.conf

---
执行以下命令使参数生效:
##内核默认参数 
kernel.sysrq = 0 
kernel.core_uses_pid = 1 
kernel.msgmnb = 65536 
kernel.msgmax = 65536 
kernel.shmmax = 68719476736 
kernel.shmall = 4294967296 
##打开文件数参数(20*1024*1024) 
fs.file-max= 20971520 
##WEB Server参数 
net.ipv4.tcp_tw_reuse=1 
net.ipv4.tcp_tw_recycle=1 
net.ipv4.tcp_fin_timeout=30 
net.ipv4.tcp_keepalive_time=1200 
net.ipv4.ip_local_port_range = 1024 65535 
net.ipv4.tcp_rmem=4096 87380 8388608 
net.ipv4.tcp_wmem=4096 87380 8388608 
net.ipv4.tcp_max_syn_backlog=8192 
net.ipv4.tcp_max_tw_buckets = 5000 
##TCP补充参数 
net.ipv4.ip_forward = 0 
net.ipv4.conf.default.rp_filter = 1 
net.ipv4.conf.default.accept_source_route = 0 
net.ipv4.tcp_syncookies = 1 
net.ipv4.tcp_sack = 1 
net.ipv4.tcp_window_scaling = 1 
net.core.wmem_default = 8388608 
net.core.rmem_default = 8388608 
net.core.rmem_max = 16777216 
net.core.wmem_max = 16777216 
net.core.netdev_max_backlog = 262144 
net.ipv4.tcp_max_orphans = 3276800 
net.ipv4.tcp_timestamps = 0 
net.ipv4.tcp_synack_retries = 1 
net.ipv4.tcp_syn_retries = 1 
net.ipv4.tcp_mem = 94500000 915000000 927000000 
##禁用ipv6 
net.ipv6.conf.all.disable_ipv6 =1 
net.ipv6.conf.default.disable_ipv6 =1 
##swap使用率优化 
vm.swappiness=0 
# sysctl -p 
同步到所有机器

1.7 修改文件句柄数

vim /etc/security/limits.conf
---

*               soft    nofile          65535
*               hard    nofile          1029345
*               soft    nproc           unlimited
*               hard    nproc           unlimited
*               soft    memlock         unlimited
*               hard    memlock         unlimited

---

---

二：安装CDH5.16.2 平台

2.1: 安装配置依赖包(全部节点都安装)

yum -y install chkconfig python bind-utils psmisc libxslt zlib sqlite cyrus-sasl-plain cyrus-sasl-gssapi fuse fuse-libs redhat-lsb postgresql* portmap mod_ssl openssl-devel python-psycopg2 MySQL-python

2.2：安装cloudera-server 与更改配置 （节点全部安装）

rpm -ivh cloudera-manager*
rpm -ivh enterprise-debuginfo-5.14.3-1.cm5143.p0.4.el7.x86_64.rpm

2.3:在mariadb-server 当中创建CM 的库

mysql -uroot -pflyfish225.com
mysql> create database cmf character set utf8;
mysql> grant all privileges on cmf.* to 'cmf'@'%' identified by 'cmf_1234' with grant option;
mysql> grant all privileges on cmf.* to 'cmf'@'node-01.flyfish' identified by 'cmf_1234' with grant option;
mysql> flush privileges;

2.4:安装离线cdh parcel-repo

#cd cdh5.16.2
#cp -p CDH-5.16.2-1.cdh5.16.2.p0.8-el7.parcel* /opt/cloudera/parcel-repo/
#cp -p manifest.json /opt/cloudera/parcel-repo/
#cd /opt/cloudera/parcel-repo
#mv CDH-5.16.2-1.cdh5.16.2.p0.8-el7.parcel.sha1 CDH-5.16.2-1.cdh5.16.2.p0.8-el7.parcel.sha   
chown -R cloudera-scm:cloudera-scm /opt/cloudera/parcel-repo/ （所有主机都要执行这条命令）

2.5 配置jdbc的驱动

tar -zxvf mysql-connector-java-5.1.44.tar.gz
cd mysql-connector-java-5.1.44
mv mysql-connector-java-5.1.44-bin.jar /usr/share/java
cd /usr/share/java
mv mysql-connector-java-5.1.44-bin.jar mysql-connector-java.jar
chmod 777 mysql-connector-java.jar

2.6 配置数据的注册生成表

1）备份db生成表的文件
cp /etc/cloudera-scm-server/db.properties /etc/cloudera-scm-server/db.propertiesbak 

2）生成表

/usr/share/cmf/schema/scm_prepare_database.sh mysql cmf cmf cmf_1234

2.7:修改config.ini 文件

vim /etc/cloudera-scm-agent/config.ini
---
server_host=192.168.100.21
---

scp /etc/cloudera-scm-agent/config.ini root@rhel02.flyfish:/etc/cloudera-scm-agent/

scp /etc/cloudera-scm-agent/config.ini root@rhel03:/etc/cloudera-scm-agent/

2.8: 启动CM-SERVER

cd /etc/init.d/
./cloudera-scm-server start

查看日志：
cd /var/log/cloudera-scm-server

tail -100f cloudera-scm-server.log

查看有7180 端口启动表示CM管理server启动

netstat -nultp |grep 7180

使用浏览器web打开：

http://192.168.100.21:7180

启动agent 端：

cd /etc/init.d/
./cloudera-scm-agent start

三： 分配主机与分配角色

所有节点执行：
#echo never > /sys/kernel/mm/transparent_hugepage/defrag
#echo never > /sys/kernel/mm/transparent_hugepage/enabled
vim /etc/rc.local 
在最下面增加：
---
echo never > /sys/kernel/mm/transparent_hugepage/defrag
echo never > /sys/kernel/mm/transparent_hugepage/enabled
---
同步所有机器

scp /etc/rc.d/rc.local root@rhel02.flyfish:/etc
scp /etc/rc.d/rc.local root@rhel03.flyfish:/etc

mysql 授权的配置

数据库授权：
mysql -uroot -pflyfish225
---
创建hive 所需要的库并授权：
mysql >create database cdh_hive default character set latin1; 
字符必须为拉丁(latin1),如果uft8可能会报错Specified key was too long; max key length is 767 bytes 
mysql >grant all privileges on cdh_hive.* to 'hive'@'%' identified by 'Hive_123' with grant option;
mysql >grant all privileges on cdh_hive.* to 'hive'@'rhel01.flyfish' identified by 'Hive_123' with grant option;
mysql >flush privileges; 

创建oozie 所需要的库
mysql >create database cdh_oozie default character set utf8; 
mysql >grant all privileges on cdh_oozie.* to 'oozie'@'%' identified by 'Oozie_123' with grant option;
mysql >grant all privileges on cdh_oozie.* to 'oozie'@'rhel01.flyfish' identified by 'Oozie_123' with grant option;
mysql >flush privileges; 

创建hue所需要的库：
mysql >create database cdh_hue default character set utf8; 
mysql >grant all privileges on cdh_hue.* to 'hue'@'%' identified by 'Hue_123' with grant option;
mysql >grant all privileges on cdh_hue.* to 'hue'@'rhel01.flyfish' identified by 'Hue_123' with grant option;
mysql >flush privileges; 

创建CM 的 监控端Activity Monitor 的库
Activity Monitor:
mysql >create database cdh_am default character set utf8; 
mysql >grant all privileges on cdh_am.* to 'am'@'%' identified by 'Am_123' with grant option;
mysql >grant all privileges on cdh_am.* to 'am'@'rhel01.flyfish' identified by 'Am_123' with grant option;
mysql >flush privileges;

创建RM 的 监控端 Reports Manager 的库
Reports Manager
mysql >create database cdh_rm default character set utf8; 
mysql >grant all privileges on cdh_rm.* to 'rm'@'%' identified by 'Rm_123' with grant option;
mysql >grant all privileges on cdh_rm.* to 'rm'@'rhel01.flyfish' identified by 'Rm_123' with grant option;
mysql >flush privileges;

标签：cloudera,grant,平台,etc,ipv4,mysql,CDH5.16,net,安装
来源： https://blog.51cto.com/flyfish225/2490326