其他分享
首页 > 其他分享> > ardrino#串口控制led

ardrino#串口控制led

作者:互联网

void setup() {
  pinMode(D6, OUTPUT);
  digitalWrite(D6,HIGH);
  Serial.begin(9600);
}

void loop() {

  String state = Serial.readString();
  if (state == "off") {
    digitalWrite(D6, HIGH);
    Serial.println("we turn off the led.");
  } else if (state == "on") {
    digitalWrite(D6, LOW);
    Serial.println("we turn on the led.");
  }
  delay(1000);
}

标签:led,digitalWrite,void,state,ardrino,串口,D6,Serial
来源: https://www.cnblogs.com/luohaonan/p/12166230.html