配置交换机端口隔离、速率、双工等【未完善】
作者:互联网
配置交换机端口隔离、速率、双工等
...
The device is running!
############################################
<lvhanghmm>sys
Enter system view, return user view with Ctrl+Z.
[lvhanghmm]port-iso
[lvhanghmm]port-isolate mode 12
^
Error: Unrecognized command found at '^' position.
[lvhanghmm]port-isolate mode l2
[lvhanghmm]
[lvhanghmm]
[lvhanghmm]
[lvhanghmm]int giga
[lvhanghmm]int GigabitEthernet 1/0/1
^
Error: Wrong parameter found at '^' position.
[lvhanghmm]int GigabitEthernet l/0/1
^
Error: Wrong parameter found at '^' position.
[lvhanghmm]int GigabitEthernet 1/0/1
^
Error: Wrong parameter found at '^' position.
[lvhanghmm]int GigabitEthernet1/0/1
^
Error: Wrong parameter found at '^' position.
[lvhanghmm]int GigabitEthernet0/0/1
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]port
[lvhanghmm-GigabitEthernet0/0/1]port-iso
[lvhanghmm-GigabitEthernet0/0/1]port-isolate en
[lvhanghmm-GigabitEthernet0/0/1]port-isolate enable grouop
[lvhanghmm-GigabitEthernet0/0/1]port-isolate enable grou
[lvhanghmm-GigabitEthernet0/0/1]port-isolate enable group l
^
Error: Wrong parameter found at '^' position.
[lvhanghmm-GigabitEthernet0/0/1]port-isolate enable group 1
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]quit
[lvhanghmm]
[lvhanghmm]
[lvhanghmm]
[lvhanghmm]int giga
[lvhanghmm]int GigabitEthernet 0/0/2
[lvhanghmm-GigabitEthernet0/0/2]
[lvhanghmm-GigabitEthernet0/0/2]
[lvhanghmm-GigabitEthernet0/0/2]
[lvhanghmm-GigabitEthernet0/0/2]port
[lvhanghmm-GigabitEthernet0/0/2]port-iso
[lvhanghmm-GigabitEthernet0/0/2]port-isolate en
[lvhanghmm-GigabitEthernet0/0/2]port-isolate enable gro
[lvhanghmm-GigabitEthernet0/0/2]port-isolate enable group 1
[lvhanghmm-GigabitEthernet0/0/2]
[lvhanghmm-GigabitEthernet0/0/2]
[lvhanghmm-GigabitEthernet0/0/2]
[lvhanghmm-GigabitEthernet0/0/2]quit
[lvhanghmm]
[lvhanghmm]
[lvhanghmm]
配置以太网接口GE0/0/1在自协商模式下协商速率为100Mb/s
[lvhanghmm]int giga
[lvhanghmm]int GigabitEthernet 0/0/1
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]negotiation auto
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]aut
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]auto s
[lvhanghmm-GigabitEthernet0/0/1]auto speed 100
Error: Configuration fails.
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]
#配置以太网电接口GE0/0/1在自协商模式下双工模式为全双工模式
[lvhanghmm]int giga
[lvhanghmm]int GigabitEthernet 0/0/1
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]negotiation auto
请忽略以下的内容
开机就开机呀!怎么还有所谓的登陆与离开呀?不是开机就能够用计算机了吗? 开什么玩笑,在Linux系统中由于是多用户多任务的环境,所以系统随时都有很多不同 的用户所下达的任务在进行, 因此正确的开关机可是很重要的!不正常的关机可能会 导致文件系统错乱,造成数据的毁损呢!这也是为什么通常我们的Linux主机都会加挂 一个不断电系统啰!
如果在第三章一切都顺利的将CentOS 7.x完成安装并且重新开机后, 应该就会出 现如下的等待登陆的图形画面才对。画面中1号箭头显示目前的日期与时间,2号箭头则 是辅助功能、语系、音量与关机钮, 3号箭头就是我们可以使用帐号登陆的输入框框, 至于4号箭头则是在使用特别的帐号登陆时才会用到的按钮。
标签:双工,int,GigabitEthernet0,isolate,端口,交换机,Error,lvhanghmm,port 来源: https://www.cnblogs.com/lvhanghmm/p/16394433.html