其他分享
首页 > 其他分享> > kubernetes -高可用部署

kubernetes -高可用部署

作者：互联网

目录

系统初始化

设置系统主机名以及 Host 文件的相互解析

hostnamectl  set-hostname  k8s-master01

安装依赖包

yum install -y conntrack ntpdate ntp ipvsadm ipset  iptables curl sysstat libseccomp wget  vim net-tools git

设置防火墙为 Iptables 并设置空规则

systemctl  stop firewalld  &&  systemctl  disable firewalld
yum -y install iptables-services  &&  systemctl  start iptables  &&  systemctl  enable iptables  &&  iptables -F  &&  service iptables save

关闭 SELINUX

swapoff -a && sed -i '/ swap / s/^\(.*\)$/#\1/g' /etc/fstab
setenforce 0 && sed -i 's/^SELINUX=.*/SELINUX=disabled/' /etc/selinux/config

调整内核参数，对于 K8S

cat > kubernetes.conf <<EOF
net.bridge.bridge-nf-call-iptables=1
net.bridge.bridge-nf-call-ip6tables=1
net.ipv4.ip_forward=1
net.ipv4.tcp_tw_recycle=0
vm.swappiness=0 # 禁止使用 swap 空间，只有当系统 OOM 时才允许使用它
vm.overcommit_memory=1 # 不检查物理内存是否够用
vm.panic_on_oom=0 # 开启 OOM	
fs.inotify.max_user_instances=8192
fs.inotify.max_user_watches=1048576
fs.file-max=52706963
fs.nr_open=52706963
net.ipv6.conf.all.disable_ipv6=1
net.netfilter.nf_conntrack_max=2310720
EOF
cp kubernetes.conf  /etc/sysctl.d/kubernetes.conf
sysctl -p /etc/sysctl.d/kubernetes.conf

调整系统时区

# 设置系统时区为 中国/上海
timedatectl set-timezone Asia/Shanghai
# 将当前的 UTC 时间写入硬件时钟
timedatectl set-local-rtc 0
# 重启依赖于系统时间的服务
systemctl restart rsyslog 
systemctl restart crond

关闭系统不需要服务

systemctl stop postfix && systemctl disable postfix

设置 rsyslogd 和 systemd journald

mkdir /var/log/journal # 持久化保存日志的目录
mkdir /etc/systemd/journald.conf.d

cat > /etc/systemd/journald.conf.d/99-prophet.conf <<EOF
[Journal]
# 持久化保存到磁盘
Storage=persistent

# 压缩历史日志
Compress=yes

SyncIntervalSec=5m
RateLimitInterval=30s
RateLimitBurst=1000

# 最大占用空间 10G
SystemMaxUse=10G

# 单日志文件最大 200M
SystemMaxFileSize=200M

# 日志保存时间 2 周
MaxRetentionSec=2week

# 不将日志转发到 syslog
ForwardToSyslog=no
EOF

systemctl restart systemd-journald

升级系统内核为 4.44

CentOS 7.x 系统自带的 3.10.x 内核存在一些 Bugs，导致运行的 Docker、Kubernetes 不稳定，例如： rpm -Uvh http://www.elrepo.org/elrepo-release-7.0-3.el7.elrepo.noarch.rpm

rpm -Uvh http://www.elrepo.org/elrepo-release-7.0-3.el7.elrepo.noarch.rpm
# 安装完成后检查 /boot/grub2/grub.cfg 中对应内核 menuentry 中是否包含 initrd16 配置，如果没有，再安装一次！
yum --enablerepo=elrepo-kernel install -y kernel-lt
# 设置开机从新内核启动
grub2-set-default 'CentOS Linux (4.4.189-1.el7.elrepo.x86_64) 7 (Core)'

Sealos 安装

Sealos 相关命令

# 下载并安装 sealos, sealos 是个 golang 的二进制工具，直接下载拷贝到 bin 目录即可, release 页面也可下载
$ wget -c https://sealyun.oss-cn-beijing.aliyuncs.com/latest/sealos && \
    chmod +x sealos && mv sealos /usr/bin

# 下载离线资源包
$ wget -c https://sealyun.oss-cn-beijing.aliyuncs.com/2fb10b1396f8c6674355fcc14a8cda7c-v1.20.0/kube1.20.0.tar.gz

# 安装一个三 master 的 kubernetes 集群
$ sealos init --passwd '123456' \
    --master 192.168.0.2  --master 192.168.0.3  --master 192.168.0.4 \ 
    --node 192.168.0.5 \
    --pkg-url /root/kube1.20.0.tar.gz \
    --version v1.16.0
增加 Master 节点
$ sealos join --master 192.168.0.6 --master 192.168.0.7

# 或者多个连续 IP
$ sealos join --master 192.168.0.6-192.168.0.9
增加 node
$ sealos join --node 192.168.0.6 --node 192.168.0.7

# 或者多个连续 IP
$ sealos join --node 192.168.0.6-192.168.0.9
删除指定 Master 节点
$ sealos clean --master 192.168.0.6 --master 192.168.0.7

# 或者多个连续 IP
$ sealos clean --master 192.168.0.6-192.168.0.9
删除指定 node 节点
$ sealos clean --node 192.168.0.6 --node 192.168.0.7

# 或者多个连续 IP
$ sealos clean --node 192.168.0.6-192.168.0.9
清理集群
$ sealos clean --all
备份集群
$ sealos etcd save

节点状态

kube-scheduler 状态查看
$ kubectl  get endpoints kube-scheduler -n kube-system -o yaml
    NAME             ENDPOINTS   AGE
    kube-scheduler   <none>      12m
    [root@k8s-master01 ~]# kubectl  get endpoints kube-scheduler -n kube-system -o yaml
    apiVersion: v1
    kind: Endpoints
    metadata:
      annotations:
        control-plane.alpha.kubernetes.io/leader: '{"holderIdentity":"k8s-master02_d9af3300-cdad-49ce-838a-2ccdd38fbf18","leaseDurationSeconds":15,"acquireTime":"2021-03-01T07:09:24Z","renewTime":"2021-03-01T07:21:27Z","leaderTransitions":1}'
      creationTimestamp: "2021-03-01T07:08:32Z"
      name: kube-scheduler
      namespace: kube-system
      resourceVersion: "2013"
      selfLink: /api/v1/namespaces/kube-system/endpoints/kube-scheduler
      uid: b34592b6-0fe0-4cdd-9887-4b5fc9e8de97
kube-controller-manager 状态查看
$ kubectl  get endpoints kube-controller-manager -n kube-system -o yaml
    apiVersion: v1
    kind: Endpoints
    metadata:
      annotations:
        control-plane.alpha.kubernetes.io/leader: '{"holderIdentity":"k8s-master02_690df468-d680-4231-a8b9-4c8fa452eecf","leaseDurationSeconds":15,"acquireTime":"2021-03-01T07:09:24Z","renewTime":"2021-03-01T07:25:47Z","leaderTransitions":1}'
      creationTimestamp: "2021-03-01T07:08:32Z"
      name: kube-controller-manager
      namespace: kube-system
      resourceVersion: "2440"
      selfLink: /api/v1/namespaces/kube-system/endpoints/kube-controller-manager
      uid: 69f747dd-57d7-4aec-8443-9b3906ee9963

标签：node,kubernetes,可用,部署,192.168,--,&&,sealos,kube
来源： https://www.cnblogs.com/tangy1/p/16310783.html