MTK平台如何查看modem是否正常

        最近接触了几个MTK平台项目（mt6762s、mt6833、mtk6765、mt6762等），在调试modem 和RF工作过程中，经常需要先判断该平台的modem是否可用。

以mt6833为例：

如下为modem异常，报TX 有问题，说明RF 这块是有问题，需要检查RF 通路配置

[   21.266002] <2>.(2)[224:ccci_fsm1][ccci1/fsm]exception 4, from fsm_main_thread
[   21.266922] <2>.(2)[224:ccci_fsm1][ccci1/fsm]md_state change from 3 to 5
[   21.268321] <2>-(2)[224:ccci_fsm1][ccci0/util][save_last_md_status] md_id = 0; event_type = 11
[   22.689968] <7>.(7)[224:ccci_fsm1][ccci1/dpmaif]stop Tx failed, 0x400080f
[   22.691275] <6>.(6)[224:ccci_fsm1][ccci1/mcd]MD exception HIF 0
[   22.692587] <6>.(6)[224:ccci_fsm1][ccci1/cif]Dump AP CCIF IRQ status not support
[   22.711331] <6>.(6)[224:ccci_fsm1][ccci1/mcd]MD exception HIF 2
[   22.712085] <6>.(6)[224:ccci_fsm1][ccci1/mcd]MD exception HIF 3
[   24.723332] <7>.(7)[224:ccci_fsm1][ccci1/cif]md_ccif_switch_ringbuf
[   24.724125] <7>.(7)[224:ccci_fsm1][ccci1/cif]md_ccif_reset_queue
[   24.724894] <7>.(7)[224:ccci_fsm1][ccci1/mcd]send clearq_ack to MD
[   24.725671] <7>.(7)[224:ccci_fsm1][ccci1/mcd]MD exception HIF 5

配置完RF 通路后，重新抓取日志，查看modem的状态为true，说明modem可用

03-01 16:47:22.928 I/AT      ( 1102): [0] AT> AT+ECSQ (RIL_CMD_READER_1 tid:488037444864)
03-01 16:47:22.928 D/GsmCdmaCallTracker( 1592): reset
03-01 16:47:22.928 D/GsmCdmaCallTracker( 1592): [0] update phone state, old=IDLE new=IDLE
03-01 16:47:22.929 I/AT      ( 1102): [0] AT< +ECSQ: 0,0,0,0,0,0,0,0,0,0 (RIL_CMD_READER_1, tid:488038481152)
03-01 16:47:22.929 D/TDC     ( 1592): getModemCount: 3
03-01 16:47:22.929 I/AT      ( 1102): [0] AT< +ECSQ: 0,0,0,0,0,0,0,32768,0,0,0,0,0 (RIL_CMD_READER_1, tid:488038481152)
03-01 16:47:22.929 I/AT      ( 1102): [0] AT< +ECSQ: 0,-512,1,1,1,1,1,256,1,1 (RIL_CMD_READER_1, tid:488038481152)
03-01 16:47:22.929 D/TDC     ( 1592): getModem: 0
03-01 16:47:22.929 D/TDC     ( 1592): getModemCount: 3
03-01 16:47:22.929 D/TDC     ( 1592): getModem: 0
03-01 16:47:22.929 I/AT      ( 1102): [0] AT< +ECSQ: 0,0,0,0,0,0,0,512,0,0 (RIL_CMD_READER_1, tid:488038481152)
03-01 16:47:22.929 I/AT      ( 1102): [0] AT< OK (RIL_CMD_READER_1, tid:488038481152)
03-01 16:47:23.185 D/RILJ    ( 1592): [0214]> GET_MODEM_STATUS [PHONE0]
03-01 16:47:23.185 D/RILJ    ( 1592): [0214]< GET_MODEM_STATUS true [PHONE0]

更新modem流程：

1、客制化修改RF

路径：\mt6762s\modem_5G\mcu\custom\l1

2、modem的编译

modem_5G/mcu$./m "TANK(NLWCG_MP_6833).mak" new

3、modem的重命名

bin路径：

\modem_5G\mcu\build\TANK\NLWCG_MP_6833\bin

database路径：

\modem_5G\mcu\build\TANK\NLWCG_MP_6833\dhl\database

编译完modem后，需要对相关的bin和database文件进行重命名，添加后缀 _1_unlwctg_n，并且拷贝到AP侧

\android\vendor\mediatek\proprietary\modem\mt6833_sp_nlwcg_mp_vmoly0069_prod

示例：

 

4、AP更侧新modem

命令：

source build/envsetup.sh

lunch pro_name

make update-modem

5、生成modem镜像 md1img-verified.img

 

标签：03,01,查看,16,47,224,MTK,modem
来源： https://blog.csdn.net/gender123/article/details/123213065