基于STM32温湿度传感器采集报警系统设计（含超声波测距）

这次的设计主要是通过读取DHT11和HCSR04的数值，（Proteus的传感器貌似这两款好用一点）把读取的DHT11和HCSR04数值通过转化在lcd1602中显示出来，还有就是可以设置通过按键设置DHT11的温湿度阈值。

仿真原理图如下

运行结果图：

按下K1，K2为加1设置，K3为减1设置

 湿度低于88%；警报响，红灯亮

#include <stm32f4xx.h>
#include "delay.h"
#include "DHT11.h"
#include "LCD1602.h"
#include "SOUN.h"
#include "KEY_ExitInit.h"
#include "LED_INIT.h"
#include "HCSR04.h"
unsigned char move = 0x82;
unsigned char RH,RL,TH,TL;
unsigned char h0 = 0X38,h1 = 0X36;
unsigned char t0 = 0X32,t1 = 0X38;
unsigned char DATA[4];//存温湿度数据
unsigned char Leg[4];//存超声波
unsigned char R[7] = "SD:";
unsigned char H[7] = "WD:";
unsigned char L[7] = "Legth:";
unsigned char r[2] = "%";
unsigned char h[2] = "C";
// 读DHT11数据及数据转换 ///
int DHT11_ReadDATA(void)
{
	int i;

省略。。

 【资源下载】下载地址：点击下载(1648) 百度网盘

标签：char,温湿度,unsigned,STM32,HCSR04,include,测距,DHT11
来源： https://blog.csdn.net/jingdianjiuchan/article/details/121982014