Wemos D1入门

2021-08-13 18:34:13 作者：互联网

WeMos D1开发板

全称是WeMos D1 WiFI UNO R3开发板，基于ESP-12E，兼容Arduino。

有了这款物联网开发板，我们就可以愉快的使用arduino方式开发ESP8266，玩转物联网项目。

1.Arduino IDE下载

链接：https://pan.baidu.com/s/1ig6psM6GvWJk0CwqaIqs7A
提取码：uyy4

2.示例(搜索WIFI)

 1 /*
 2  *  This sketch demonstrates how to scan WiFi networks. 
 3  *  The API is almost the same as with the WiFi Shield library, 
 4  *  the most obvious difference being the different file you need to include:
 5  */
 6 #include "ESP8266WiFi.h"
 7 
 8 void setup() {
 9   Serial.begin(115200);
10 
11   // Set WiFi to station mode and disconnect from an AP if it was previously connected
12   WiFi.mode(WIFI_STA);
13   WiFi.disconnect();
14   delay(100);
15 
16   Serial.println("Setup done");
17 }
18 
19 void loop() {
20   Serial.println("scan start");
21 
22   // WiFi.scanNetworks will return the number of networks found
23   int n = WiFi.scanNetworks();
24   Serial.println("scan done");
25   if (n == 0)
26     Serial.println("no networks found");
27   else
28   {
29     Serial.print(n);
30     Serial.println(" networks found");
31     for (int i = 0; i < n; ++i)
32     {
33       // Print SSID and RSSI for each network found
34       Serial.print(i + 1);
35       Serial.print(": ");
36       Serial.print(WiFi.SSID(i));
37       Serial.print(" (");
38       Serial.print(WiFi.RSSI(i));
39       Serial.print(")");
40       Serial.println((WiFi.encryptionType(i) == ENC_TYPE_NONE)?" ":"*");
41       delay(10);
42     }
43   }
44   Serial.println("");
45 
46   // Wait a bit before scanning again
47   delay(5000);
48 }

3.WIFI搜索

4.点灯控制

/*
 *  This sketch demonstrates how to set up a simple HTTP-like server.
 *  The server will set a GPIO pin depending on the request
 *    http://server_ip/gpio/0 will set the GPIO2 low,
 *    http://server_ip/gpio/1 will set the GPIO2 high
 *  server_ip is the IP address of the ESP8266 module, will be 
 *  printed to Serial when the module is connected.
 */

#include <ESP8266WiFi.h>

const char* ssid = "your-ssid";
const char* password = "your-password";

// Create an instance of the server
// specify the port to listen on as an argument
WiFiServer server(80);

void setup() {
  Serial.begin(115200);
  delay(10);

  // prepare GPIO2
  pinMode(2, OUTPUT);
  digitalWrite(2, 0);
  
  // Connect to WiFi network
  Serial.println();
  Serial.println();
  Serial.print("Connecting to ");
  Serial.println(ssid);
  
  WiFi.begin(ssid, password);
  
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }
  Serial.println("");
  Serial.println("WiFi connected");
  
  // Start the server
  server.begin();
  Serial.println("Server started");

  // Print the IP address
  Serial.println(WiFi.localIP());
}

void loop() {
  // Check if a client has connected
  WiFiClient client = server.available();
  if (!client) {
    return;
  }
  
  // Wait until the client sends some data
  Serial.println("new client");
  while(!client.available()){
    delay(1);
  }
  
  // Read the first line of the request
  String req = client.readStringUntil('\r');
  Serial.println(req);
  client.flush();
  
  // Match the request
  int val;
  if (req.indexOf("/gpio/0") != -1)
    val = 0;
  else if (req.indexOf("/gpio/1") != -1)
    val = 1;
  else {
    Serial.println("invalid request");
    client.stop();
    return;
  }

  // Set GPIO2 according to the request
  digitalWrite(2, val);
  
  client.flush();

  // Prepare the response
  String s = "HTTP/1.1 200 OK\r\nContent-Type: text/html\r\n\r\n<!DOCTYPE HTML>\r\n<html>\r\nGPIO is now ";
  s += (val)?"high":"low";
  s += "</html>\n";

  // Send the response to the client
  client.print(s);
  delay(1);
  Serial.println("Client disonnected");

  // The client will actually be disconnected 
  // when the function returns and 'client' object is detroyed
}

标签：入门,WiFi,Wemos,server,print,client,println,Serial,D1
来源： https://www.cnblogs.com/bymeet/p/15138653.html