md5算法实现原理深剖
作者：互联网
一、基本介绍
MD系列算法是信息摘要三大算法中的一种，全称：Message Digest算法，按照规范版本分为MD2、MD4、MD5三种算法，目前最常用的是MD5版本算法。本文介绍MD5算法的实现原理。
1991年，继 MD4 算法后，罗纳德·李维斯特教授开发了 MD5 算法，将 MD 算法推向成熟。MD5 算法经 MD2、MD3 和 MD4 算法发展而来，算法复杂程度和安全强度大大提高。但不管是 MD2、MD4 还是 MD5 算法，其算法的最终结果均是产生一个 128 位的消息摘要，这也是 MD 系列算法的特点。MD5 算法执行效率略次于 MD4 算法，但在安全性方面，MD5 算法更胜一筹。随着计算机技术的发展和计算水平的不断提高，MD5 算法暴露出来的漏洞也越来越多。1996 年后被证实存在弱点，可以被加以破解，对于需要高度安全性的数据，专家一般建议改用其他算法，如 SHA-2。2004 年，证实 MD5 算法无法防止碰撞（collision），因此不适用于安全性认证，如 SSL 公开密钥认证或是数字签名等用途。
二、实现原理
有关 MD5 算法详情请参见 RFC 1321 http://www.ietf.org/rfc/rfc1321.txt，RFC 1321 是MD5算法的官方文档，其实现原理共分为5步：
第1步：字节填充(Append Padding Bytes)
数据先补上1个1比特，再补上k个0比特，使得补位后的数据比特数(n+1+k)满足(n+1+k) mod 512 = 448，k取最小正整数。
第2步：追加长度信息(Append Length)
数据比特位的数据长度追加到最后8字节中。
第3步：初始化MD Buffer(Initialize MD Buffer)
这一步最简单了，定义ABCD四个4字节数组，分别赋初值即可。
uint32_t A = 0x67452301; // [ 0x01, 0x23, 0x45, 0x67 ] uint32_t B = 0xEFCDAB89; // [ 0x89, 0xAB, 0xCD, 0xEF ] uint32_t C = 0x98BADCFE; // [ 0xFE, 0xDC, 0xBA, 0x98 ] uint32_t D = 0x10325476; // [ 0x76, 0x54, 0x32, 0x10 ]
以上操作与md4完全一致。
第4步：处理消息块(Process Message in 16-Byte Blocks)
这个是MD5算法最核心的部分了，对第2步组装数据进行分块依次处理。
/* Process each 16-word block. */
For i = 0 to N/16-1 do
/* Copy block i into X. */
For j = 0 to 15 do
Set X[j] to M[i*16+j].
end /* of loop on j */
/* Save A as AA, B as BB, C as CC, and D as DD. */
AA = A
BB = B
CC = C
DD = D
/* Round 1. */
/* Let [abcd k s i] denote the operation
a = b + ((a + F(b,c,d) + X[k] + T[i]) <<< s). */
/* Do the following 16 operations. */
[ABCD 0 7 1] [DABC 1 12 2] [CDAB 2 17 3] [BCDA 3 22 4]
[ABCD 4 7 5] [DABC 5 12 6] [CDAB 6 17 7] [BCDA 7 22 8]
[ABCD 8 7 9] [DABC 9 12 10] [CDAB 10 17 11] [BCDA 11 22 12]
[ABCD 12 7 13] [DABC 13 12 14] [CDAB 14 17 15] [BCDA 15 22 16]
/* Round 2. */
/* Let [abcd k s i] denote the operation
a = b + ((a + G(b,c,d) + X[k] + T[i]) <<< s). */
/* Do the following 16 operations. */
[ABCD 1 5 17] [DABC 6 9 18] [CDAB 11 14 19] [BCDA 0 20 20]
[ABCD 5 5 21] [DABC 10 9 22] [CDAB 15 14 23] [BCDA 4 20 24]
[ABCD 9 5 25] [DABC 14 9 26] [CDAB 3 14 27] [BCDA 8 20 28]
[ABCD 13 5 29] [DABC 2 9 30] [CDAB 7 14 31] [BCDA 12 20 32]
/* Round 3. */
/* Let [abcd k s t] denote the operation
a = b + ((a + H(b,c,d) + X[k] + T[i]) <<< s). */
/* Do the following 16 operations. */
[ABCD 5 4 33] [DABC 8 11 34] [CDAB 11 16 35] [BCDA 14 23 36]
[ABCD 1 4 37] [DABC 4 11 38] [CDAB 7 16 39] [BCDA 10 23 40]
[ABCD 13 4 41] [DABC 0 11 42] [CDAB 3 16 43] [BCDA 6 23 44]
[ABCD 9 4 45] [DABC 12 11 46] [CDAB 15 16 47] [BCDA 2 23 48]
/* Round 4. */
/* Let [abcd k s t] denote the operation
a = b + ((a + I(b,c,d) + X[k] + T[i]) <<< s). */
/* Do the following 16 operations. */
[ABCD 0 6 49] [DABC 7 10 50] [CDAB 14 15 51] [BCDA 5 21 52]
[ABCD 12 6 53] [DABC 3 10 54] [CDAB 10 15 55] [BCDA 1 21 56]
[ABCD 8 6 57] [DABC 15 10 58] [CDAB 6 15 59] [BCDA 13 21 60]
[ABCD 4 6 61] [DABC 11 10 62] [CDAB 2 15 63] [BCDA 9 21 64]
/* Then perform the following additions. (That is increment each
of the four registers by the value it had before this block
was started.) */
A = A + AA
B = B + BB
C = C + CC
D = D + DD
end /* of loop on i */
第5步：输出(Output)
这一步也非常简单，只需要将计算后的A、B、C、D进行拼接输出即可。
三、示例讲解
四、代码实现
以下为C/C++代码实现：
#include <string.h>
#include <stdio.h>
#define HASH_BLOCK_SIZE 64 /* 512 bits = 64 bytes */
#define HASH_LEN_SIZE 8 /* 64 bits = 8 bytes */
#define HASH_LEN_OFFSET 56 /* 64 bytes - 8 bytes */
#define HASH_DIGEST_SIZE 16 /* 128 bits = 16 bytes */
typedef unsigned char uint8_t;
typedef unsigned short int uint16_t;
typedef unsigned int uint32_t;
typedef unsigned long long uint64_t;
/* T table */
static uint32_t T[64] =
{
/* Round 1 */
0xD76AA478, 0xE8C7B756, 0x242070DB, 0xC1BDCEEE, 0xF57C0FAF, 0x4787C62A, 0xA8304613, 0xFD469501,
0x698098D8, 0x8B44F7AF, 0xFFFF5BB1, 0x895CD7BE, 0x6B901122, 0xFD987193, 0xA679438E, 0x49B40821,
/* ROUND 2 */
0xF61E2562, 0xC040B340, 0x265E5A51, 0xE9B6C7AA, 0xD62F105D, 0x02441453, 0xD8A1E681, 0xE7D3FBC8,
0x21E1CDE6, 0xC33707D6, 0xF4D50D87, 0x455A14ED, 0xA9E3E905, 0xFCEFA3F8, 0x676F02D9, 0x8D2A4C8A,
/* ROUND 3 */
0xFFFA3942, 0x8771F681, 0x6D9D6122, 0xFDE5380C, 0xA4BEEA44, 0x4BDECFA9, 0xF6BB4B60, 0xBEBFBC70,
0x289B7EC6, 0xEAA127FA, 0xD4EF3085, 0x04881D05, 0xD9D4D039, 0xE6DB99E5, 0x1FA27CF8, 0xC4AC5665,
/* ROUND 4 */
0xF4292244, 0x432AFF97, 0xAB9423A7, 0xFC93A039, 0x655B59C3, 0x8F0CCC92, 0xFFEFF47D, 0x85845DD1,
0x6FA87E4F, 0xFE2CE6E0, 0xA3014314, 0x4E0811A1, 0xF7537E82, 0xBD3AF235, 0x2AD7D2BB, 0xEB86D391
};
static uint32_t F(uint32_t X, uint32_t Y, uint32_t Z)
{
return (X & Y) | ((~X) & Z);
}
static uint32_t G(uint32_t X, uint32_t Y, uint32_t Z)
{
return (X & Z) | (Y & (~Z));
}
static uint32_t H(uint32_t X, uint32_t Y, uint32_t Z)
{
return X ^ Y ^ Z;
}
static uint32_t I(uint32_t X, uint32_t Y, uint32_t Z)
{
return Y ^ ( X | (~Z));
}
/* 循环向左移动offset个比特位 */
static uint32_t MoveLeft(uint32_t X, uint8_t offset)
{
uint32_t res = (X << offset) | (X >> (32 - offset));
return res;
}
static uint32_t Round1(uint32_t A, uint32_t B, uint32_t C, uint32_t D, uint32_t M, uint32_t N, uint32_t T)
{
return B + MoveLeft(A + F(B, C, D) + M + T, N);
}
static uint32_t Round2(uint32_t A, uint32_t B, uint32_t C, uint32_t D, uint32_t M, uint32_t N, uint32_t T)
{
return B + MoveLeft(A + G(B, C, D) + M + T, N);
}
static uint32_t Round3(uint32_t A, uint32_t B, uint32_t C, uint32_t D, uint32_t M, uint32_t N, uint32_t T)
{
return B + MoveLeft(A + H(B, C, D) + M + T, N);
}
static uint32_t Round4(uint32_t A, uint32_t B, uint32_t C, uint32_t D, uint32_t M, uint32_t N, uint32_t T)
{
return B + MoveLeft(A + I(B, C, D) + M + T, N);
}
#define ASSERT_RETURN_INT(x, d) if(!(x)) { return d; }
int md5(unsigned char *out, const unsigned char* in, const int inlen)
{
ASSERT_RETURN_INT(out && in && (inlen >= 0), 1);
int i = 0, j = 0;
// step 1: 字节填充(Append Padding Bytes)
// 数据先补上1个1比特，再补上k个0比特，使得补位后的数据比特数(n+1+k)满足(n+1+k) mod 512 = 448，k取最小正整数
int iX = inlen / HASH_BLOCK_SIZE;
int iY = inlen % HASH_BLOCK_SIZE;
iX = (iY < HASH_LEN_OFFSET) ? iX : (iX + 1);
int iLen = (iX + 1) * HASH_BLOCK_SIZE;
unsigned char* M = malloc(iLen);
memcpy(M, in, inlen);
// 先补上1个1比特+7个0比特
M[inlen] = 0x80;
// 再补上(k-7)个0比特
for (i = inlen + 1; i < (iX * HASH_BLOCK_SIZE + HASH_LEN_OFFSET); i++)
{
M[i] = 0;
}
// step 2: 追加长度信息(Append Length)
uint64_t *pLen = (uint64_t*)(M + (iX * HASH_BLOCK_SIZE + HASH_LEN_OFFSET));
*pLen = inlen << 3;
// Step 3. 初始化MD Buffer(Initialize MD Buffer)
uint32_t A = 0x67452301; // 0x01, 0x23, 0x45, 0x67
uint32_t B = 0xEFCDAB89; // 0x89, 0xAB, 0xCD, 0xEF
uint32_t C = 0x98BADCFE; // 0xFE, 0xDC, 0xBA, 0x98
uint32_t D = 0x10325476; // 0x76, 0x54, 0x32, 0x10
uint32_t X[HASH_BLOCK_SIZE / 4] = { 0 };
// step 4: 处理消息块(Process Message in 64-Byte Blocks)
for (i = 0; i < iLen / HASH_BLOCK_SIZE; i++)
{
/* Copy block i into X. */
for (j = 0; j < HASH_BLOCK_SIZE; j = j + 4)
{
uint32_t* temp = &M[i * HASH_BLOCK_SIZE + j];
X[j / 4] = *temp;
}
/* Save A as AA, B as BB, C as CC, and D as DD. */
uint32_t AA = A;
uint32_t BB = B;
uint32_t CC = C;
uint32_t DD = D;
/* Round 1. */
/* Let [abcd k s i] denote the operation
a = b + ((a + F(b,c,d) + X[k] + T[i]) <<< s). */
/* Do the following 16 operations.
[ABCD 0 7 1][DABC 1 12 2][CDAB 2 17 3][BCDA 3 22 4]
[ABCD 4 7 5][DABC 5 12 6][CDAB 6 17 7][BCDA 7 22 8]
[ABCD 8 7 9][DABC 9 12 10][CDAB 10 17 11][BCDA 11 22 12]
[ABCD 12 7 13][DABC 13 12 14][CDAB 14 17 15][BCDA 15 22 16]
此处T[i]有问题 应该是i-1 索引下标从0开始
*/
A = Round1(A, B, C, D, X[0], 7, T[0]); D = Round1(D, A, B, C, X[1], 12, T[1]); C = Round1(C, D, A, B, X[2], 17, T[2]); B = Round1(B, C, D, A, X[3], 22, T[3]);
A = Round1(A, B, C, D, X[4], 7, T[4]); D = Round1(D, A, B, C, X[5], 12, T[5]); C = Round1(C, D, A, B, X[6], 17, T[6]); B = Round1(B, C, D, A, X[7], 22, T[7]);
A = Round1(A, B, C, D, X[8], 7, T[8]); D = Round1(D, A, B, C, X[9], 12, T[9]); C = Round1(C, D, A, B, X[10], 17, T[10]); B = Round1(B, C, D, A, X[11], 22, T[11]);
A = Round1(A, B, C, D, X[12], 7, T[12]); D = Round1(D, A, B, C, X[13], 12, T[13]); C = Round1(C, D, A, B, X[14], 17, T[14]); B = Round1(B, C, D, A, X[15], 22, T[15]);
/* Round 2. */
/* Let [abcd k s i] denote the operation
a = b + ((a + G(b,c,d) + X[k] + T[i]) <<< s). */
/* Do the following 16 operations.
[ABCD 1 5 17][DABC 6 9 18][CDAB 11 14 19][BCDA 0 20 20]
[ABCD 5 5 21][DABC 10 9 22][CDAB 15 14 23][BCDA 4 20 24]
[ABCD 9 5 25][DABC 14 9 26][CDAB 3 14 27][BCDA 8 20 28]
[ABCD 13 5 29][DABC 2 9 30][CDAB 7 14 31][BCDA 12 20 32]
*/
A = Round2(A, B, C, D, X[1], 5, T[16]); D = Round2(D, A, B, C, X[6], 9, T[17]); C = Round2(C, D, A, B, X[11], 14, T[18]); B = Round2(B, C, D, A, X[0], 20, T[19]);
A = Round2(A, B, C, D, X[5], 5, T[20]); D = Round2(D, A, B, C, X[10], 9, T[21]); C = Round2(C, D, A, B, X[15], 14, T[22]); B = Round2(B, C, D, A, X[4], 20, T[23]);
A = Round2(A, B, C, D, X[9], 5, T[24]); D = Round2(D, A, B, C, X[14], 9, T[25]); C = Round2(C, D, A, B, X[3], 14, T[26]); B = Round2(B, C, D, A, X[8], 20, T[27]);
A = Round2(A, B, C, D, X[13], 5, T[28]); D = Round2(D, A, B, C, X[2], 9, T[29]); C = Round2(C, D, A, B, X[7], 14, T[30]); B = Round2(B, C, D, A, X[12], 20, T[31]);
/* Round 3. */
/* Let [abcd k s t] denote the operation
a = b + ((a + H(b,c,d) + X[k] + T[i]) <<< s). */
/* Do the following 16 operations.
[ABCD 5 4 33][DABC 8 11 34][CDAB 11 16 35][BCDA 14 23 36]
[ABCD 1 4 37][DABC 4 11 38][CDAB 7 16 39][BCDA 10 23 40]
[ABCD 13 4 41][DABC 0 11 42][CDAB 3 16 43][BCDA 6 23 44]
[ABCD 9 4 45][DABC 12 11 46][CDAB 15 16 47][BCDA 2 23 48]
*/
A = Round3(A, B, C, D, X[5], 4, T[32]); D = Round3(D, A, B, C, X[8], 11, T[33]); C = Round3(C, D, A, B, X[11], 16, T[34]); B = Round3(B, C, D, A, X[14], 23, T[35]);
A = Round3(A, B, C, D, X[1], 4, T[36]); D = Round3(D, A, B, C, X[4], 11, T[37]); C = Round3(C, D, A, B, X[7], 16, T[38]); B = Round3(B, C, D, A, X[10], 23, T[39]);
A = Round3(A, B, C, D, X[13], 4, T[40]); D = Round3(D, A, B, C, X[0], 11, T[41]); C = Round3(C, D, A, B, X[3], 16, T[42]); B = Round3(B, C, D, A, X[6], 23, T[43]);
A = Round3(A, B, C, D, X[9], 4, T[44]); D = Round3(D, A, B, C, X[12], 11, T[45]); C = Round3(C, D, A, B, X[15], 16, T[46]); B = Round3(B, C, D, A, X[2], 23, T[47]);
/* Round 4. */
/* Let [abcd k s t] denote the operation
a = b + ((a + I(b,c,d) + X[k] + T[i]) <<< s). */
/* Do the following 16 operations.
[ABCD 0 6 49][DABC 7 10 50][CDAB 14 15 51][BCDA 5 21 52]
[ABCD 12 6 53][DABC 3 10 54][CDAB 10 15 55][BCDA 1 21 56]
[ABCD 8 6 57][DABC 15 10 58][CDAB 6 15 59][BCDA 13 21 60]
[ABCD 4 6 61][DABC 11 10 62][CDAB 2 15 63][BCDA 9 21 64]
*/
A = Round4(A, B, C, D, X[0], 6, T[48]); D = Round4(D, A, B, C, X[7], 10, T[49]); C = Round4(C, D, A, B, X[14], 15, T[50]); B = Round4(B, C, D, A, X[5], 21, T[51]);
A = Round4(A, B, C, D, X[12], 6, T[52]); D = Round4(D, A, B, C, X[3], 10, T[53]); C = Round4(C, D, A, B, X[10], 15, T[54]); B = Round4(B, C, D, A, X[1], 21, T[55]);
A = Round4(A, B, C, D, X[8], 6, T[56]); D = Round4(D, A, B, C, X[15], 10, T[57]); C = Round4(C, D, A, B, X[6], 15, T[58]); B = Round4(B, C, D, A, X[13], 21, T[59]);
A = Round4(A, B, C, D, X[4], 6, T[60]); D = Round4(D, A, B, C, X[11], 10, T[61]); C = Round4(C, D, A, B, X[2], 15, T[62]); B = Round4(B, C, D, A, X[9], 21, T[63]);
/* Then perform the following additions. (That is, increment each
of the four registers by the value it had before this block
was started.) */
A = A + AA;
B = B + BB;
C = C + CC;
D = D + DD;
}
// step 5: 输出ABCD
memcpy(out + 0, &A, 4);
memcpy(out + 4, &B, 4);
memcpy(out + 8, &C, 4);
memcpy(out + 12, &D, 4);
free(M);
return 0;
}
int main()
{
unsigned char digest[16] = { 0 };
md5(digest, "Hello World!", strlen("Hello World!"));
return 0;
}
标签：HASH,深剖,算法,static,return,md5,uint32,MD5 来源： https://www.cnblogs.com/Kingfans/p/16554047.html