OFDM系统仿真【matlab源码】
作者:互联网
实验原理 链接: https://blog.csdn.net/qq_44394952/article/details/122508495.
OFDM.m
//
clear all;
close all;
carrier_count = 200; % 子载波数
symbol_count = 100; %总符号数
ifft_length = 512; % IFFT长度
CP_length = 128; % 循环前缀
CS_length = 20; % 循环后缀
rate = [];
SNR =20;
bit_per_symbol = 4;
alpha = 1.5/32; % 升余弦窗系数
% ================产生随机序列=======================
bit_length = carrier_count*symbol_count*bit_per_symbol;
bit_sequence = round(rand(1,bit_length))'; % 列向量
% =================串并转换==========================
% ==================16QAM调制=========================
% 1-28置零 29-228有效 229-285置零 286-485共轭 486-512置零
carrier_position = 29:228;
conj_position = 485:-1:286;
bit_moded = qammod(bit_sequence,16,'InputType','bit');
figure(1);
scatter(real(bit_moded),imag(bit_moded));
title('调制后的星座图');
grid on;
% ===================IFFT===========================
ifft_position = zeros(ifft_length,symbol_count);
bit_moded = reshape(bit_moded,carrier_count,symbol_count);
figure(2);
stem(abs(bit_moded(:,1)));
grid on;
ifft_position(carrier_position,:)=bit_moded(:,:);
ifft_position(conj_position,:)=conj(bit_moded(:,:));
signal_time = ifft(ifft_position,ifft_length);
figure(3);
subplot(3,1,1)
plot(signal_time(:,1),'b');
title('原始单个OFDM符号');
xlabel('Time');
ylabel('Amplitude');
axis([0 500 -0.5 0.5])
% ==================加循环前缀和后缀==================
signal_time_C = [signal_time(end-CP_length+1:end,:);signal_time];
signal_time_C = [signal_time_C; signal_time_C(1:CS_length,:)]; % 单个完整符号为512+128+20=660
subplot(3,1,2);
plot(signal_time_C(:,1));
xlabel('Time');
ylabel('Amplitude');
title('加CP和CS的单个OFDM符号');
axis([0 500 -0.5 0.5])
% =======================加窗========================
signal_window = zeros(size(signal_time_C));
% 通过矩阵点乘
signal_window = signal_time_C.*repmat(rcoswindow(alpha,size(signal_time_C,1)),1,symbol_count);
subplot(3,1,3)
plot(signal_window(:,1))
title('加窗后的单个OFDM符号')
xlabel('Time');
ylabel('Amplitude');
axis([0 500 -0.5 0.5])
% ===================发送信号,多径信道====================
signal_Tx = reshape(signal_window,1,[]); % 并串转换,变成时域一个完整信号,待传输
signal_origin = reshape(signal_time_C,1,[]); % 未加窗完整信号
mult_path_am = [1 0.2 0.1]; % 多径幅度
mutt_path_time = [0 20 50]; % 多径时延
windowed_Tx = zeros(size(signal_Tx));
path2 = 0.2*[zeros(1,20) signal_Tx(1:end-20) ];
path3 = 0.1*[zeros(1,50) signal_Tx(1:end-50) ];
signal_Tx_mult = signal_Tx + path2 + path3; % 多径信号
figure(4)
subplot(2,1,1)
plot(signal_Tx)
title('单径下OFDM信号')
xlabel('Time/samples')
ylabel('Amplitude')
axis([0 1000 -0.5 0.5])
subplot(2,1,2)
plot(signal_Tx_mult)
title('多径下OFDM信号')
xlabel('Time/samples')
ylabel('Amplitude')
axis([0 1000 -0.5 0.5])
% =====================发送信号频谱========================
% 每个符号求频谱再平均,功率取对数
orgin_aver_power = 20*log10(mean(abs(fft(signal_time_C'))));
% ====================加窗信号频谱=========================
figure(5) % 归一化
orgin_aver_power = 20*log10(mean(abs(fft(signal_window'))));
plot((1:length(orgin_aver_power))/length(orgin_aver_power),orgin_aver_power)
hold on
axis([0 1 -40 5])
grid on
title('加窗信号频谱')
% ========================加AWGN==========================
signal_power_sig = var(signal_Tx); % 单径发送信号功率
signal_power_mut = var(signal_Tx_mult); % 多径发送信号功率
SNR_linear = 10^(SNR/10);
noise_power_mut = signal_power_mut/SNR_linear;
noise_power_sig = signal_power_sig/SNR_linear;
noise_sig = randn(size(signal_Tx))*sqrt(noise_power_sig);
noise_mut = randn(size(signal_Tx_mult))*sqrt(noise_power_mut);
Rx_data_sig = signal_Tx+noise_sig;
Rx_data_mut = signal_Tx_mult+noise_mut;
% =======================串并转换==========================
Rx_data_mut = reshape(Rx_data_mut,ifft_length+CS_length+CP_length,[]);
Rx_data_sig = reshape(Rx_data_sig,ifft_length+CS_length+CP_length,[]);
% ====================去循环前缀和后缀======================
Rx_data_sig(1:CP_length,:) = [];
Rx_data_sig(end-CS_length+1:end,:) = [];
Rx_data_mut(1:CP_length,:) = [];
Rx_data_mut(end-CS_length+1:end,:) = [];
% =========================FFT=============================
fft_sig = fft(Rx_data_sig);
fft_mut = fft(Rx_data_mut);
% =========================恢复采样===========================
data_sig = fft_sig(carrier_position,:);
data_mut = fft_mut(carrier_position,:);
figure(6)
scatter(real(reshape(data_sig,1,[])),imag(reshape(data_sig,1,[])),'.')
grid on;
title('单径接收信号星座图')
figure(7)
scatter(real(reshape(data_mut,1,[])),imag(reshape(data_mut,1,[])),'.')
grid on;
title('多径接收信号星座图')
% =========================16QAM逆映射===========================
bit_demod_sig = reshape(qamdemod(data_sig,16,'OutputType','bit'),[],1);
bit_demod_mut = reshape(qamdemod(data_mut,16,'OutputType','bit'),[],1);
% =========================误码率===========================
error_bit_sig = sum(bit_demod_sig~=bit_sequence);
error_bit_mut = sum(bit_demod_mut~=bit_sequence);
error_rate_sig = error_bit_sig/bit_length;
error_rate_mut = error_bit_mut/bit_length;
rate = [rate; error_rate_sig error_rate_mut]
rcoswindow.m
function window=rcoswindow(alpha,bit_length)
warning off;
window = zeros(1,bit_length/2);
t = 1:bit_length/2;
T = bit_length/(2*(1+alpha));
window(t) = 0.5*(1 - sin(pi/(2*alpha*T)*(t-T)));
window(1:(1-alpha)*T) = 1;
window=[fliplr(window) window]';
end
标签:mut,OFDM,signal,length,源码,sig,matlab,bit,data 来源: https://blog.csdn.net/qq_44394952/article/details/122508697